Reviews
Tools used only occasionally are SK11
I use basic KTC and Tone for tools.
I use SK11 for tools that are used only occasionally.
Insert angle of this Deep socket:6.35mm (1/4Inch) Purchase
Sprocket Coveretc.It is necessary to remove the bolt that is deep in the bolt, and it is necessary to remove the bolt that is deep in the bolt.
Frequently used insertion angle:9.5mm (3/8Inch) Deep socket in the
If you try to use the 8mm, the Ratchet Pouch opening will be
It's thicker, so it hits the Cover.
So, insertion angle:6.35mm (1/4Inch) will be needed
But I don't use KTCetc. so I don't want to buy KTCetc. for my Wallet...
Thank goodness for SK11's Socket
Reliable quality at a reasonable price
I use KTC and Tone where I hang Large Torque.
The parts of SmallTorque that are not used much are supplemented with SK11.
View detail
Purchased for Torque wrench
Purchased for Torque wrench. However, the Holder cracked rather easily if I didn't pinch it properly. View detail
Torque also has a Quantity:Set is convenient
I wanted a Torque set and found the other SK11Socket easy to use, so I bought this one. View detail
Easy to use
Purchased for Small TypeRatchet, cost performance is high with Holder set. Easy to use even in tight spaces. View detail
I think it is very cosy. It is carefully made.
I have been using Quantity for many years now.:The socket adapter of the set finally broke. I was looking for a replacement, and this product seemed to be the cheapest and the most well-made, so I bought it. I bought it because it seemed to be the cheapest and well-made product I could find. It fits very snugly and is easy to remove, and I think it is very cost effective.
I don't know about durability, but it looks good, so I gave it 5 stars.
View detail
This is enough for the Torx bit socket of T30
[How is it used?
Used to remove the key cylinder from the Top Bridge of a YAMAHA TZr50R.
I had TorqueT40 for XJR400R Rear suspension, but the size was different, so I had to purchase additional TorqueT40 as Single Item.
Was the one you received as per Image?
It was just as Image.
I checked the size in Home center before purchasing.
How was your experience with it?
It works fine. SK11 is very good for DIY riders because of its cost performance.
[Points to note]
Not particularly
How did it compare to other products?
Torque is rarely used on domestic cars, so I think that SK11's most cost-effective tools will be enough without buying expensive ones.
View detail
under compulsion
I lost my 24mm Socket for Elumi's Castle Nut, and although I rarely use 24mm, I needed it, so I purchased the SK11 SK11 Socket 24mm this time, considering the cost performance.
9.I was torn between 5mm and 12.7mm, but decided to go with 9.5mm since Motorcycle uses 9.5mm as a base.
The quality is good and they are a reliable Manufacturer that I have purchased many other things from.
View detail
Socket
Combined with the Small Type Ratchet, it is very useful for compact use in tight spaces.
Single Item sales, affordable prices are helpful.
View detail
Ordinary Socket
Motorcycle Stand Lift I purchased this for the purpose of lifting Jack.
Lift up the BOLT Shoulder Bag, but it is a one-person Motorcycle straddle and cause the Jack under the belly Quantity.:Set.
At this time, the BOLT Shoulder Bag has a very good footing and a low center of gravity, so the Motorcycle is less likely to become unstable even when bending forward.
When I operated the jack for the first time after purchasing it, I used my MONKEY Wrench, but I thought a manual ratchet wrench would be more convenient for operating the jack, so I decided to use this product, which has a standard that fits the ratchet.
Since the main application is Jack elevation, I think the durability is infinitely etc.
I have operated with Impact wrench, but it is difficult to operate Throw alone, so I think Hand tool is better without danger.
View detail
angle
It is useful because the angle can be changed for use in tight spaces.
It is reasonably priced, compact, and takes up little space for storage.
View detail
As an on-board tool for motorcycles
I purchased this as an on-board tool for my motorcycle.
I had a Socket set as my main tool, so the low price and the One Touch Socket Holder were the deciding factors in my decision to purchase it as an in-vehicle tool.
The quality is perfect for normal use, as is the low price.
View detail
Gold is distinctive
Available in 3mm to 12mm, Quantities are more affordable than Single Items.:Set is a better value.
I think the quality is good enough, as I have never had any licking while using it.
For clarity, we have used TEPLA to indicate Size.
View detail
It's cheap
It is inexpensive, of good quality, and useful.
Theplastics are used to indicate Size for ease of use.
It also comes with a One Touch Socket Holder, which is a great value.
View detail
For maintenance.
The length is just right and can be used for different purposes.
The longest one in particular is now required to remove the Plug.
View detail
Used to remove Plug
The ZrX1200R plug is quite far back, so it is much easier to do without this product.
I think it is a useful tool to have in places where other tools are difficult to access.
View detail
For hard-to-reach places
I bought it because it was reasonably priced for hard-to-reach areas.
The Universal section seems to work well and is easy to use.
This makes it easier to turn Wrench.
View detail
Different lengths.
I bought this for use with Compact Ratchet.
It is convenient to have different lengths so that you can use them in different places.
It also takes up little space as an in-vehicle tool.
View detail
Extension
Convenient for use in tight locations.
It is also good as an in-vehicle tool together with the Compact Ratchet because it does not take up much space.
View detail
6.35mm (1/4Inch)
CompactRatchet, insertion angle:6.35mm (1/4Inch) This is a purchase for use in
3 different lengthsQuantity:Set, it is good because it can be used in different places of use.
6.35mm (1/4Inch) It is small, not heavy, and does not take up much space as an on-board tool, so it is likely to be quite useful.
View detail
For automotive tools
Compact ratchet, insertion angle:9.5mm (3/8Inch) I purchased this product to be used for
It is helpful because the size you want in Single Item is sold.
It will be portable as an in-vehicle tool without taking up too much space.
View detail