Reviews
It is a good product
I purchased this one and I am satisfied that the number of KTC's increased again
It is also a favorite that JAPAN is also solid making.
This product has a fixing screw at the place of Bit,
It seems possible to unplug and loosen up and down
View detail
Hexagonal
I wanted to use the above photo Rainbow from the past, but since the monochromatic type of the bottom photo was sold at bargain at a neighboring tool shop, I bought an impulse.
Easy to use is perfect as it is origami, this Type is Holder is Magnet so Garageetc. It's very convenient because it can be affixed to the wall of.
View detail
Do not sell nearby
Long9. I do not sell Hexagon socket of 5sp, there is not much use frequency, but it is safe! I want to buy Large people at the same time as other Size, but the price is Parenthesis so that 4 stars It is! View detail
Long's Length is good
Purchased as an on-board tool of R1 - Z.
In this car model, Hexagonal seems to be able to cope with the hexagonal hole Bolt which is visible to the outside of the car body in 3 kinds of 4 mm, 5 mm, 6 mm. (The Meter panel seems to be 3 mm Hexagonal, but I think that this will not normally decompose. )
In Hexagon socket of normal length the base (Silver color part) Because the thickness of it may get in the way and may not reach, I think that Long is good.
Although the Ball point may be useful, there is a sense of security without having to pull straight into it more than enter diagonally.
Although it is slightly expensive, in my case Bolt that uses Phillips Screwdriver has also changed to hexagon hole Bolt considering prevention of taming, so I think that use frequency will be high.
View detail
Good stuff
Because Yamaha's Motorcycle got licked with Screw lock agent, it seemed to be licking so buying a need for a firm tool. I hope there is only Kusutsushi KTC, I wonder if I can arrange little by little. View detail
Excellent tightening feeling.
The feeling of Torque firmly in hand is preeminent at all times when tightening.
In cheap ones, Wrench itself has been caught and the feeling of tightening Torque is not well transmitted to the hand. ?
This Wrench is a feeling ◎ because it is solidly made.
Also fast turning is ◎.
View detail
It helps special situations.
(1) Because it is Short Type under the neck, it helps in situations with obstacles.
(2) The L-shaped part is 95 degrees instead of 90-degrees. Whether this is easy to use or hard to use depends on the situation.
(3) Is the twistability a standard feeling.
(4) I have never actually used the Ball point side, but because it's a short type Short Type it is unlikely to turn.
(5) Because it is inexpensive, I think that there is no loss even if there is one.
View detail
To decompose Fork of NSR 250
Spec for decomposing Fork of NSR 250.
It is the bottom Bolt.
It is quite nice and it has firm rigidity
Usage is bad if you can lick it with kore
I think that I will buy the same thing even if it gets broken
View detail
I think that Maru Shaft is a feature.
(1) Because it is round Shaft, it is easy to grasp. It feels like Fit in hand.
(2) Shaft is about 1 mm thicker than Wrench of Hexagonal Shaft of the same Size.
(3) It is Wrench which will not deflect even if you apply strong force.
(4) The black part of the tip is easy to rust.
(5) Shaft surface is not a Nasiji but a mirror surface Plating but a Lame-like feeling.
(6) It is not JAPAN.
View detail
I think that KTC is nice.
I often use Hexagonal for 5 mm, but I thought that I will use it someday and also purchased for 4 mm.
I want to use a proper tool because Small Bolt is so easy to lick.
View detail
Attached to Ratchet
Purchase to remove Caliper
Although I used to cheap things at the price and home center, I chose KTC with a place that is expensive as well as a place as well as good location.
Making was fresh, and work proceeded without anxiety.
This Socket seems to be able to exchange Bit, you can insert a small hexagon in the hole of the photo and exchange it for something of different size. If you buy only the hexagon part, COSPA is good.
On the other hand, it takes time to exchange, I think that it is unsuitable for those who like Smooth work.
View detail
KTC of trust
Basic tools are using KTC. HandlebarRatchet is not broken after more than 20 years of use.
There are also cheap tools, but the worrying price difference (Tens of thousands of yen) Otherwise, without hesitation "KTC" is not it.
I will continue to use KTC from now on.
View detail
Maintenance essential goods
After all, Large hand Manufacturer purchased KTC thought that it could be used for decades with firm making. Length It is a Manufacturer that makes me want to arrange little by little, just satisfied with Large change. View detail
After all the tool is KTC.
I wanted Long Type 's Hexagon socket that I can use with Single Body at the time of maintenance and purchased it. It's convenient because you do not have to wear Extension bar.
Although I actually used it after this, since there is a Length in Single Body, it is easy to attach only this to Handlebar.
I would like to purchase a 5 mm Type that I often use at the next shopping.
View detail
It purchased, although the Fuse-box Cover screw thread of WR250x is removed.It is effective in the hexagon head bolt which extended far back since it was a Long type, and since the 13.5-cm Shaft and the Handle are attached, it is very convenient.If a requ
It purchased, although the Fuse-box Cover screw thread of WR250x is removed.It is effective in the hexagon head bolt which extended far back since it was a Long type, and since the 13.5-cm Shaft and the Handle are attached, it is very convenient.If a required size is arranged since a price is also handy, I will think that it is good. View detail
Since it was not attached to a Socket set, it purchases by addition. It is easy-to-use too. Adding a required Size to its purchase, when required regards a thing of this sort as or most.
Since it was not attached to a Socket set, it purchases by addition.
It is easy-to-use too.
Adding a required Size to its purchase, when required regards a thing of this sort as or most.
View detail
It may be unable to be used in form that I am mainly using it, although it is T type. It is the turn here in that case. Although it is a good thing which differs from a cheap article about there and does not rust easily, COSPAR thinks tha
It may be unable to be used in form that I am mainly using it, although it is T type.
It is the turn here in that case.
Although it is a good thing which differs from a cheap article about there and does not rust easily, COSPAR thinks that it is good with a cheap article being disagreeable and thinking in a strong thing also by common = and
, if still better
synthesis of a still more expensive thing is done.
Although the thing with an expensive sufficient thing is good, to the extent that the number of times of turn can be considered regards it as just right kana.
View detail
It is the tool which I am using most as a Title. If called ? from which L form hexagonal-bars Wrench and what are different, it will grasp and will raise the ease of entering of easy and power. already -- also turning -- since the portion of a
It is the tool which I am using most as a Title.
If called ? from which
L form hexagonal-bars Wrench and what are different, it will grasp and will raise the ease of entering of easy and power.
already -- also turning -- since the portion of a grip is heavy, it often turns with a centrifugal force -- w
- which cannot be used for a narrow place -- although there is also a fault, such as being bulky, an effect is greatest if it is the vehicles which are using the Screw of six angles for the exterior like R6.
w
which it would be convenient, he would buy and it will have arranged if you buy 1 -- although the number of photographs is three and they become empty, since it cannot have a lot -- w
View detail
Made in tool Manufacturer KTC and 9 become a Set, the die length of L character portion is right just, and if it has this Set, most hexagon head bolts can be removed. Since one side is a Ball point and slanting rotation work can also be performed, th
Made in tool Manufacturer KTC and 9 become a Set, the die length of L character portion is right just, and if it has this Set, most hexagon head bolts can be removed.
Since
one side is a Ball point and slanting rotation work can also be performed, the work of a narrow portion is also enabled.
The
raw material is also good, and since it is hard to rust, it is lasting long.
It is used eight years this and that.
Although a cheap thing has a Clearance to a hexagon head bolt and a Bolt may be spoiled, since it fits into a Bolt here exactly, it can be used in comfort.
View detail
Since there was a case where it was hard and could not turn by a cheap hexagonal-bars Wrench, the Wrench of PB was used by the Motorcycle store's recommendation. There is a rigid feeling dramatically and he had a feeling which clings to a Bolt firml
Since there was a case where it was hard and could not turn by a cheap hexagonal-bars Wrench, the Wrench of PB was used by the Motorcycle store's recommendation.
There is a rigid feeling dramatically and he had a feeling which clings to a Bolt firmly, and it can be very easy-to-use and the Bolt which was not able to turn when it was before can also be firmly turned now.
Although there is naturally also a method of making it easy to turn using
CRC or a Screw looser agent for exclusive use, in a part not to use a Chemical for as much as possible, I regard the circumference of a Brake, etc. as it being a very effective Wrench.
It also tickles the Mania heart that the Size and the Serial number are written to
each one.
View detail