Reviews
Savior of the Rusted Screw!
I had Neji-saurus, but I bought additional KNIPEX!
And comparison
Strength to add Screw with the mouth.
The Neji-saurus has a longitudinal groove cut into the end of the pliers.
The size is not adjustable, so there is a limit to the diameter that can be held in the mouth. Moreover, since the size cannot be adjusted, the ability to grip is limited by the diameter of the screw.:Pair (for Left and Right) It will be….
KNIPEX can widen the mouth with a slip joint, so almost all
You can grab it at the best Point to Screw.
This difference is anyway Large tight!
Ability to grab on to something other than the mouth
KNIPEX is diamond-shaped and holds three points, so it can be gripped firmly.
In addition, the slip joint can be adjusted to suit the object to be gripped!
The Neji-saurus engages all the way when closed, so it is good for gripping thin objects, but difficult to grip objects with a Large diameter or thicker objects….
Conclusion
You should definitely buy KNIPEX from the beginning!
When I bought Neji-saurus, they didn't sell KNIPEX Slip joint pliers yet... Crying
View detail
A clear difference in grasping ability!
I've been using Pliers for a few hundred dollars from Home center,
Since it is a gripping tool that is used rather often, go to KNIPEX of trust.
Prices are also high enough to betray your trust, though (sweat)
I think you can tell from the pictures,
The machining accuracy of the tool is levechi !!!!
Oh my, how easy it is to use (laughs).
I've left it in place, but the home center tool is not in use.
The basics are gone!
Good tools are the ones you use most often!
It's seriously inspiring!
View detail
Need to buy two of them, for Shaft and for Hole!
I used to use a very inexpensive for-hole and for-shaft combination from Asphalt.
Lots of rattles and poor workability.
So I bought a hole, for Shaft, from top quality KNIPEX anyway!
In the case of Asphalt, the parts you remove can fly away due to rattling and be lost.
But if you align the holes and for shafts independently, you can get the same results.
Well, all of those failures will be eliminated!
I want to use good tools and do good maintenance comfortably and without waste anyway.
I guess so!
It's a tool that PRO just raves about!
Well, the price is also PRO price….
View detail
There is a reason why expensive tools are expensive!
Only for tools that are rarely used,
I have been using a tool made by Asphalt that can be used for both for Shaft and for Hole.
I used to use it, but maintenance is part of my hobby.
We are replacing them with better tools little by little!
What's best is the feeling that when you grab it, it won't let go!
As for the as-fat, for the amount that both can be used with the earlier replacement.
There was a lot of rattling, and when I took it off, I had to skip it and look for parts.
Sometimes I have to do it …. This is a waste of time and effort.
KNIPEX has no such problems so far!
If you consider maintenance as a hobby, buy it!
View detail
I've been using A Fat for years, but the accuracy of Crimping is totally different!
I bought it at Home center when I started messing around with Motorcycle.
A Fat Electric PliersQuantity:Set
I've been using this for many years, but I'm not sure if it's possible to make a Bullet Terminal during the Wiring process or not.
I'm getting frequent, so I got excited and went to KNIPEX.
A Fatty is more multifunctional and has a Scissors section that cuts off wiring.
What's easy to use is easy to use,
In terms of Crimping, once you pinch it.
After deforming the Bullet terminal to some extent, it is like this Crimp.
KNIPEX is hard to cut because Wiring cut is in the middle.
But when Crimping, just hold it without thinking and you can Crimp on Beauty!
The difference is really huge!
It's an emotional Level.
So, A Fat is in storage (laughs).
View detail
Versatile Tool
[How is it used?
Purchased as a replacement for Ratchet, MONKEY Wrench, and
When I go to Course for practice, I don't want to bring a lot of tools with me, so I can use this one PC for all kinds of things.
It is very convenient to keep it in the car as a tool in case of emergency.
As soon as I bought it, I was practicing on Course when my footpeg bent and I had to use it as a first aid kit.
There are various sizes available, but 250 seems to be the iron plate, so you can't go wrong if you purchase this size first.
View detail
COBRA Cobra XS Water pump pliers
The size is large enough to fit in the coin pocket of Jeans. View detail
When it comes to water pump pliers, this is it!
This is hard to tell without actually holding it in your hand, but nothing feels as comfortable as this.
The make, grips, and everything else is different from cheap water pump pliers.
Even so, it is not that extremely expensive.
It is a gem that you should definitely have one of these.
Recommendation
View detail
Easy to use
The Grip is very easy to hold and grip, so it is easy to apply force.
The angle of the tip of the pliers is so good that once the Snap ring is kept in place, it does not slip off.
It is easy to use, which greatly increases efficiency and reduces work time.
View detail
Is good
The length of the handle is easy for Grip to hold, and it is non-slip and easy to apply force.
You can have a firm pliers.
The tip is very strong and resistant to bending force and slippage, so you can grip objects with confidence.
View detail
Easy to use
I like KNIPEX, so Pliers also bought KNIPEX.
There is no rattling in the operating section, and the teeth fit perfectly without gaps.
It has just the right heft and front-to-back balance when you hold it in your hand.
It is easy to hold and feels comfortable in the hand.
The grabbed object is held firmly and does not slip.
It excels as a pliers.
Recommended
View detail
The grips are KNIPEX
I've been blindly unifying my grips with KNIPEX.
Long nose also bought KNIPEX.
There is no rattle in the actuator and the teeth fit perfectly without any gaps.
This is as expected of KNIPEX.
The nigiri is also just right in that it is non-slippery and feels Round.
They're used so often that they need to be durable, too.
So far, I have been able to use it without grinding or chipping my teeth.
Recommended
View detail
I can grab anything.
With regular pliers, the width of the pliers is determined by the width of the pliers.
This product has a wide range of grabbing width.
The long handle makes it easy to put force into the product and allows for a firm grip.
Objects will not slip and fall.
These pliers are easy to use and come in handy.
View detail
Easy to use
I bought it for use in tight areas that are difficult to grip with regular pliers.
The bend at the tip is exquisite, and it feels like an attack on the Limit, where power is easily applied.
The texture is as expected of KNIPEX, very easy to grip and use.
I can recommend it
View detail
So-so Standard.
It's just regular Radio pliers if you ask me.
If you want to buy any kind of radio pliers, you can buy them at a hundred-yen store, but the quality of the good ones is higher than the price.
”If you want a good rad pen”, you can go with KTC without thinking twice, but I think you'll be more satisfied if you work a little harder and go with something around KNIPEX.
The size is easy to use for general purpose.
Personally, I prefer not to have the Nipper part because I have a Nipper separately, but this is not a part that I particularly care about because it is more common to have it.
The sense of precision is excellent, and there is no rattle in the joint parts.
However, the tip is thin & the rigidity is disadvantageous because it is long, so it does not have the same grip as normal Pliers, although it has anti-slip processing.
That said, I think it's an excellent rad pen. (My personal opinion)
The Grip is cast resin, so it's gentle on the hand, and it doesn't seem like the resin will come loose again.
In general, the texture and ease of use are good enough to recommend this product if you want a ”good rad pen”.
View detail
The thing that grabs you is KNIPEX!
It's just normal Pliers, if you ask me.
Pliers itself is something that you can buy at a hundred-yen store if you want, but the quality of the good ones is high for the price.
If you want ”good Pliers”, you can go with KTC without thinking twice, but I think you'll be more satisfied if you work a little harder and go with something around KNIPEX.
The size is easy to use for general purpose.
Personally, I prefer not to have the Nipper part because there is a separate Nipper, but this is not a particularly important part because it is more common to have it.
The sense of precision is excellent, and there is no rattle in the joint parts.
In addition, since the engagement part is sharply processed, it can be gripped firmly, but on the other hand, it is necessary to be careful not to damage the other side.
The Grip is cast resin, so it's gentle on the hand, and it doesn't seem like the resin will come loose again.
In general, it has a good texture and ease of use, and is fully recommended if you want a ”good Pliers”.
View detail
Expensive but good.
I bought 4411-J1 for Overhaul of Brake master.
If the correspondence range is 12-25mm, and it is this use for Motorcycle, it will be Large strong almost by this one.
The replaceable ones are not stable and difficult to use, and the ones I used had a bad tip shape and were destroyed by fatigue during work.
As expected of KNIPEX, the tip is designed in such a way that it grips the Ring and does not let go, preventing fatigue fracture.
If you're looking for your first pair of Snap Ring Pliers, this is a great place to start.
View detail
Like strong Tweezers.
The size is more like the large size of Tweezers than the slim size of Radio pliers.
It's useful for small tasks like grabbing carburetor needles or pulling things out of the back of the car.
There are no grooves carved into the gripping surface, it is flat. It won't hurt the things you grab.
View detail
KNIPEX Cobra
I leave a review after use about the KNIPEX Cobra water pump pliers. These adjustable pliers have a size adjustment for gripping, and there is also a button to lock it. Very well done. Excellent grip. Very strong. View detail
It is not slippery.
The Grip is easy to hold and grip, and the angle of the tip of the Pliers is so good that once you hold the Snap ring, it will not slip off. It's a great way to save time and increase efficiency. View detail