Reviews
With this.
Minimum required tools.
If you are going to modify the electrical components yourself, at the very least, this should be enough to make the Large sturdy.
There are cheaper ones, but they are difficult to use or lack Size….
If you look above, there is no Drill, so for now, here is the Recommendation.
View detail
Good thing it came in a two-pack.
In the summer, when we replaced the radiator hose, two of the OEM hose bands reached their limits, so we had to use a hose band purchased at Home center as a stopgap measure. In the meantime, the Material:The Stainless Steel one served its function, but the band was 13mm wide and I didn't like the look of it.
When we went touring the other day, there was a small amount of coolant leakage from the hose that connects to the Radiator, which splashed around and stained a part of the Engine white. Needless to say, I washed the affected area as soon as I got back because coolant has a bad effect on the paint.
There were no coolant leaks for a while after the hose was replaced, so we assumed that the band had loosened. It might have been OK to retighten the band as it was, but we decided to replace the band because it might loosen again and we did not like the appearance of the band.
Among the many hose bands available, we selected the DAYTONA band, which is narrow at 8mm in width and can hold two hoses, but is also Reasonable. However, the Radiator hose at the location where I wanted to tighten is about 32mm in diameter, and this product can be used from 25mm to 50mm, but there would be a surplus of large size. Unfortunately, DAYTONA does not sell a product in the correct size.
I decided to replace the Band and broke the first one. I tightened the screws too hard to make sure they were tight enough, since they had leaked coolant, but the screws spun around and damaged the Band, rendering it unusable. The second one was tightened carefully and firmly, and the coolant leak was solved.
The second one was going to be used to replace the band on the Hose under the tank the next time I remove the tank, which is a shame. I regret that I was not careful when tightening it in.
View detail
Used in Brake related.
I really need it in MASTEROverhaul.
Yeah, this is the guy.
Snap ringFryer。
It's a problem if you don't have it, but you may be surprised to find it in your own tool box or among the tools you have put together on the go.
The tip breaks off, etc.
There are better quality tools available, but I think this is fine for Sun Machine.
Due to the structure that can be attached and detached, it is not very strong or forceful.
If you are not careful when working, you may skip the snap ring, so it is better to support it with a radipen or the like.
View detail
good
Used to replace Clutch on CUB90.
Lock nut with room to spare because it grips Firmly.
It was loosened.
However, the sides of the clutch should be degreased with Parts cleaner.
I think it will improve the bite.
Might it slip with Oil on it?
I used Holder on Clutch after degreasing.
View detail
To remove Snap ring
Analog Oil Temperature Gauge that was previously installed on a GB250 CLUBMAN is being repaired because oil is getting into the window surface of the Oil Temperature Meter and the oil temperature cannot be determined.
I was thinking.
There is a snap ring on the window surface of the Oil Temperature Meter, which must first be removed before moving on to the next task.
I tried various ways to remove the Snap ring but could not get it off, so I ended up buying Snap Ring Pliers.
It is not a tool that I use very often, but I think it would come in handy if I had it.
I have tried to Rose the Oil Temperature Meter, but could not fix the problem.
View detail
Does it serve the purpose of a dedicated tool?
I bought this to use on an overhaul of an old brake master as described in the product description. It is true that I can grab the C-ring at the back, but as soon as I grab it and try to pull it out, the tip part broke off.
Since it was used for only a few minutes, we wonder about its Cost performance as well.
I wasted my time and Gold, but I still decided to buy a special tool from ToolManufacturer.
View detail
Ring cannot be removed. Tool won't fit.
The tip was too thick and the hole was too narrow for the z1 Master Cylinder to get the Ring. View detail
Although only the band holder was used until now and the size adjustment of the band was troublesome to the degree which is desorption, after using a one-touch pulley folder, there is also no time and effort of size adjustment, and it could manage work ve
Although only the band holder was used until now and the size adjustment of the band was troublesome to the degree which is desorption, after using a one-touch pulley folder, there is also no time and effort of size adjustment, and it could manage work very comfortably.
The price is a tool which cannot be parted with once texture is also strong and it gets used to it, although it was somewhat high!
View detail
The equivalent device was sold at a bargain price in the home center. Although it is good since it purchased in order to float a mailing cost .. I think that it is quality.
The equivalent device was sold at a bargain price in the home center.
Although it is good since it purchased in order to float a mailing cost .. I think that it is quality.
View detail
I think Parenthesis is good with Logo with DAYTONA.
I think this product is a good parenthesis with DAYTONA with Logo. It is a sturdy and solid product that you can feel secure when you hold it in your hand. View detail
Fits: HONDA ADV150, HONDA PCX125, HONDA PCX125, HONDA PCX160, HONDA LEAD125, YAMAHA NMAX, YAMAHA CYGNUS X, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA MAJESTYS, YAMAHA NMAX155
ADDRESSV125S
Large change is helpful to work on it. I don't get to use it very often. View detail
Easy to Crimp
I don't do a lot of Bullet Type Terminal crimps, but I found it easy to use when I do occasionally. View detail
at some future time
I rarely mess with the electrical system, so I rarely get to use it.
But it is still one of the tools that I need to have.
It is very useful not only for Motorcycle but also for cars, home appliances and small repairs.
When I first bought it, I was a little skeptical that it would work. ”I was skeptical, but I've been using ChocolateChocolate for over 10 years now….
It's been a long time coming, but it's not broken.
Not a very expensive tool in terms of Gold value, so very handy to have!
View detail
Circlip Pliers Good Quality
These circlip pliers are made strong and from good quality materials. They have a long nose for reaching further into spacers especially removing the circlip from front master brake cylinders. The size of the pliers are good with a great gripping handle. I put a piece of plastic tubing over the points of the pliers to protect them from damage or bending and breaking. View detail
no problem
WR250X with FMF's Mega bomb and Heat Guard for Mega bomb I am
I noticed that the two Stainless Steel Band that I had installed the Heat Guard One of them was missing
It was good to have just one, but I decided to change both of them somehow, so I decided to use Quantity:I chose this item in 1 Set of 2pcs
It's 25-50 in length, 8mm wide and snug or a little tighter
View detail
I could use it normally.
I used it to remove Circlip with 2 to 3 cm in diameter during Sprocket exchange of gsxr 250. It was possible to use it without problems. I am thankful if it is a little cheaper.. View detail
Incidentally
We shopping a lot with Wei Big and purchase it at the same time because there was a business to use. I only used once, I do not know the durability, but I think that it will not break unless it is treated roughly. I think that the price is reasonable as well. View detail
Durability is unlikely
Used to remove Pulley of CYGNUS X.
Although I have bought several times so far, it is easy to use without slipping out of the new item, but as I use it many times, the Rubber part got sore and it got caught and it got slippery.
I hope more durability of this Rubber part.
But the ease of use as a tool is a good feeling.
Since I could not use Small because of Small in the Clutch Outer of CYGNUS X, I added Bracket to the root part and extended it for use.
View detail
Fits: HONDA ADV150, HONDA PCX125, HONDA PCX125, HONDA PCX160, HONDA LEAD125, YAMAHA NMAX, YAMAHA CYGNUS X, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA MAJESTYS, YAMAHA NMAX155
Early, but ...
Unlike the Holder of the type to be tightened, unlike the Holder of the type to be tightened, if you adjust the Size, you can operate with One-touch so you can work efficiently, but the scenes that can be used will be limited as well.
I practically use it only when fastening Flywheel like a photo. In this usage case, this type of tool is faster because the operating angle is limited when tightening Type.
However, since it takes plenty of space in the tool box more than not to be used much, I can not recommend it except for those who can afford Space.
For those who are looking for the first tool to fiddle with Scooter or who want universal nature, we recommend Holder of type to be tightened.
http : / / www. webike. net / sd / 21784446 /
There is a Type with a "claw" on the inside with a tool similar to this, which can also be used for Pulley with teeth on the outer periphery, like Honda type, so this type is recommended here.
http : / / www. webike. net / sd / 21331222 /
As a digression, since the tool of this hand has no unified name, it is troublesome when searching. Universal holder, Pulley holder, Fly Wheel Holder, Scissor Holder, HandHolderetc. ...
View detail
Fits: HONDA ADV150, HONDA PCX125, HONDA PCX125, HONDA PCX160, HONDA LEAD125, YAMAHA NMAX, YAMAHA CYGNUS X, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA MAJESTYS, YAMAHA NMAX155
It may be necessary for ScooterMaintenance
MAJESTYS 'V Belt - Weight Roller Purchase for replacement. High Speed ??Pulley was manufactured by DAYTONA among a number of Manufacturers, so we selected one made by DAYTONA. Because it was made by the same DAYTONA, the hole to be caught was Exactly. There is no problem at all in function, making is also firm and made by DAYTONA.
View detail