Reviews
Good accuracy
I had been using cheap valves and Type radio pliers, but I decided to go with a proper Manufacturer's product, so I chose KTC's Radio pliers.
Even with a strong grip, there is no gap at the tip, and the precision is as expected.
View detail
Similar to Pliers.
It is the same as Pliers and is well made and easy to apply force.
It also operates smoothly, so it is not a cheap product.
It is useful for detailed work, etc.
I have some Rust recently, but would like to maintain and use it.
View detail
Used for many years
It is easy to grip and apply force, so it is Firmly attached.
It is quite useful because it is sometimes used in various scenes unexpectedly.
Accuracy is good and no Wobble.
View detail
Powerful pincers!
Water pump pliers are a necessity for playing with motorcycles.
Ordinary pliers have a weak bite, but water pump pliers have great bite and are easy to turn and grip.
View detail
Easy to use
Grip is non-slip and very easy to use.
The beak is also very precise and does not drop anything it grabs.
It was like a quintessential KTC.
View detail
Easy to use
It is easy to use to remove the Grip, etc. that holds the Bumper in place.
Grips that have sand in them will crack if you try to forcefully pry them out with a slotted screwdriver.
This pliers can be removed efficiently because it is a dedicated product.
View detail
easy to grasp
The Grip is very easy to grip and easy to apply force.
The angle of the tip is just right for gripping a hose clip, etc.
Unlike Straight, it is very easy to use.
The sharp groove on the tip prevents the gripped Parts from slipping.
View detail
It is cheap and good
It was cheap, so I bought it to try it out.
(Cheaper than KNIPEX)
It was surprisingly easy to grip and use.
The teeth Edge is nice and sharp, with few rattles.
It can grab things firmly.
The soft grip also has subtle unevenness, so it does not slip when held by an oil hand.
I think the cost performance is outstanding.
If you are not concerned about foreign brands, I can recommend this Pliers.
View detail
I bought it to turn a 13mm Nut in a narrow section
[How is it used?
I bought it to turn a 13mm nut in a narrow section.
How was your experience with it?
I wanted to turn a 13mm nut in a narrow space where even a thin or small type Spanner, Wrench, or MONKEY would not fit, but I could not turn it as I wanted after trying various methods.
The tip of these pliers have GizaGiza horizontal grooves to prevent slipping, and it was very helpful that they did not slip when the nut was tucked in.
The angle of the NoseBent was just right, and the thin wall thickness of the tip made it useful to open the mouth of the pliers' tips to insert them into tight areas.
I wish I had found this tool in the beginning after spending a lot of money to buy other tools to approach.
How did it compare to other products?
There are similar NoseBentPliers in other products, but I think this product is excellent because the Bent angle did not match and some of them slipped right away even if the Nut was plucked without the non-slip groove at the end.
View detail
This is a good one.
[How is it used?
I used to work with Rajpen and the like, but I wanted to try it after seeing the reviews of my seniors here.
Was the one you received as per Image?
KTCQuality. No problem.
How was your experience with it?
I used it to lighten the weight of the clutch on my MT-07 and was impressed with the improvement in workability. If you look closely, you can see that it is made that way.
[Points to note]
I don't think so.
How did it compare to other products?
I chose this one from the senior review.
Recommended
View detail
It's different, isn't it?
One Pliers makes all the difference in the accuracy of the destination.
I use it when I want to remove the hose clip.
What's with the ease of grip on similar items?
View detail
Even so, Pliers is Pliers
Compared to the no-name product, it is easier to grip and apply force, so you can FirmlyHold it.
It seems to have good engagement accuracy, no wobble, and no slippage.
View detail
This is a tool that will last a lifetime.
[How is it used?
I bought this to replace my Wheel bearing.
Was the one you received as per Image?
It's more than an Image. It is solidly made. As expected of KTC.
How was your experience with it?
Snap ring is a surprisingly good opportunity to take it off, isn't it?
I used to buy cheap ones, but they bent and broke easily. I used to buy cheap ones, but they bent or broke easily.
I chose this product because I had a Timing to use again, so I thought I'd take this opportunity to buy a proper one.
First of all, the texture is good with matte feeling.
This KTC Snap ring pliers can be used widely because it can be used as a shaft hole.
It is not the kind of thing to replace the part of the head that you see quite often, but it is a strong and solid death.
Moreover, the tip of this tool is firmly angled.
Snap ring comes off when you put a lot of force on it. When you use a cheap tool, it comes off.
At that point, the tip is bent, so it will hold firmly.
I'm impressed because it doesn't require much force. That battle with the cheap tools I've been using is a lie...
[Points to note]
I've only started using it so I don't know how it will be in the future, but I think it's a tool that will be with me for a long time.
How did it compare to other products?
It is definitely good. Cospa is the best.
View detail
You can use it for anything.
The small one is loaded with the Puncture Repair Kit from Motorcycle. If you step on a nail or something, you can definitely pull it out with this Radipen. I use the large one as a tool in the garage. View detail
It is not slippery and easy to use.
The Grip is easy to grip and easy to apply force. The angle of the tip is just right for grabbing Hose clips and other parts, so it is very easy to use. The grooves on the tip don't let the parts slip, so it's very efficient. View detail
I like the functionality.
It is easy to remove the remaining Grip of Lining on the door panel and the Grip which is fixing the bumper. You can remove the grips that are biting the sand by using a slotted screwdriver. View detail
Firmly biting.
I was able to bite down firmly and turn it with a powerful torque to loosen the Screw that I had licked off. The Grip is easy to grip and effective with its easy-to-use Large size. View detail
Perfectly comfortable to use.
Once you use these radio pliers, they perform so well that you'll think of anything else as a toy. It has a firm grip and performs its function well in delicate situations. The tool must be KTC. View detail
It's cool
Small TypePliers made by KTC, with good texture and cheap recommendation It is
After all, because it is not an inexpensive thing like 100 yen even, it seems to last a long time if I use it for Large
View detail
I had trouble with Bar code...
Bar code 2430 G - 200 Long nose pliers and this Radio pliers Long Type I was worried, but this KTC PSL - 200 L is better "Grippers" I bought it because it is so long.
Again, there is only KTC, the surface finish is beautiful unlike cheap ones. Mr. Webike was the cheapest price too! If you do not use outside of the application, I think that there is no problem with durability.
View detail