Reviews
When it comes to water pump pliers, this is it!
This is hard to tell without actually holding it in your hand, but nothing feels as comfortable as this.
The make, grips, and everything else is different from cheap water pump pliers.
Even so, it is not that extremely expensive.
It is a gem that you should definitely have one of these.
Recommendation
View detail
Professional tool wire twister
It is a good Tool that is very easy to use.
The only drawback is that it requires a strong grip to lock the Wire in place. It would be great if it were easier to lock.
View detail
Easy to use
Grip is non-slip and very easy to use.
The beak is also very precise and does not drop anything it grabs.
It was like a quintessential KTC.
View detail
I think Parenthesis is good with Logo with DAYTONA.
I think this product is a good parenthesis with DAYTONA with Logo. It is a sturdy and solid product that you can feel secure when you hold it in your hand. View detail
Easy to use
It is easy to use to remove the Grip, etc. that holds the Bumper in place.
Grips that have sand in them will crack if you try to forcefully pry them out with a slotted screwdriver.
This pliers can be removed efficiently because it is a dedicated product.
View detail
easy to grasp
The Grip is very easy to grip and easy to apply force.
The angle of the tip is just right for gripping a hose clip, etc.
Unlike Straight, it is very easy to use.
The sharp groove on the tip prevents the gripped Parts from slipping.
View detail
Easy to use
The Grip is very easy to hold and grip, so it is easy to apply force.
The angle of the tip of the pliers is so good that once the Snap ring is kept in place, it does not slip off.
It is easy to use, which greatly increases efficiency and reduces work time.
View detail
Is good
The length of the handle is easy for Grip to hold, and it is non-slip and easy to apply force.
You can have a firm pliers.
The tip is very strong and resistant to bending force and slippage, so you can grip objects with confidence.
View detail
Easy to use
It can be used for various clips, so just having one PC is good because of its universal nature.
The tip is long and thin, making it easy to reach and work in tight spaces.
View detail
good quality
The long, thin tip is ideal for gripping small objects.
It is easy to use and very easy to work with, even when working in tight spaces.
The Grip is also easy to hold and does not slip, making it easy to do delicate work.
View detail
Fits: HONDA ADV150, HONDA PCX125, HONDA PCX125, HONDA PCX160, HONDA LEAD125, YAMAHA NMAX, YAMAHA CYGNUS X, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA MAJESTYS, YAMAHA NMAX155
ADDRESSV125S
Large change is helpful to work on it. I don't get to use it very often. View detail
Easy to use
I like KNIPEX, so Pliers also bought KNIPEX.
There is no rattling in the operating section, and the teeth fit perfectly without gaps.
It has just the right heft and front-to-back balance when you hold it in your hand.
It is easy to hold and feels comfortable in the hand.
The grabbed object is held firmly and does not slip.
It excels as a pliers.
Recommended
View detail
The grips are KNIPEX
I've been blindly unifying my grips with KNIPEX.
Long nose also bought KNIPEX.
There is no rattle in the actuator and the teeth fit perfectly without any gaps.
This is as expected of KNIPEX.
The nigiri is also just right in that it is non-slippery and feels Round.
They're used so often that they need to be durable, too.
So far, I have been able to use it without grinding or chipping my teeth.
Recommended
View detail
It is cheap and good
It was cheap, so I bought it to try it out.
(Cheaper than KNIPEX)
It was surprisingly easy to grip and use.
The teeth Edge is nice and sharp, with few rattles.
It can grab things firmly.
The soft grip also has subtle unevenness, so it does not slip when held by an oil hand.
I think the cost performance is outstanding.
If you are not concerned about foreign brands, I can recommend this Pliers.
View detail
I can grab anything.
With regular pliers, the width of the pliers is determined by the width of the pliers.
This product has a wide range of grabbing width.
The long handle makes it easy to put force into the product and allows for a firm grip.
Objects will not slip and fall.
These pliers are easy to use and come in handy.
View detail
Easy to use
I bought it for use in tight areas that are difficult to grip with regular pliers.
The bend at the tip is exquisite, and it feels like an attack on the Limit, where power is easily applied.
The texture is as expected of KNIPEX, very easy to grip and use.
I can recommend it
View detail
I bought it to turn a 13mm Nut in a narrow section
[How is it used?
I bought it to turn a 13mm nut in a narrow section.
How was your experience with it?
I wanted to turn a 13mm nut in a narrow space where even a thin or small type Spanner, Wrench, or MONKEY would not fit, but I could not turn it as I wanted after trying various methods.
The tip of these pliers have GizaGiza horizontal grooves to prevent slipping, and it was very helpful that they did not slip when the nut was tucked in.
The angle of the NoseBent was just right, and the thin wall thickness of the tip made it useful to open the mouth of the pliers' tips to insert them into tight areas.
I wish I had found this tool in the beginning after spending a lot of money to buy other tools to approach.
How did it compare to other products?
There are similar NoseBentPliers in other products, but I think this product is excellent because the Bent angle did not match and some of them slipped right away even if the Nut was plucked without the non-slip groove at the end.
View detail
This is a good one.
[How is it used?
I used to work with Rajpen and the like, but I wanted to try it after seeing the reviews of my seniors here.
Was the one you received as per Image?
KTCQuality. No problem.
How was your experience with it?
I used it to lighten the weight of the clutch on my MT-07 and was impressed with the improvement in workability. If you look closely, you can see that it is made that way.
[Points to note]
I don't think so.
How did it compare to other products?
I chose this one from the senior review.
Recommended
View detail
Easy to Crimp
I don't do a lot of Bullet Type Terminal crimps, but I found it easy to use when I do occasionally. View detail
Even so, Pliers is Pliers
Compared to the no-name product, it is easier to grip and apply force, so you can FirmlyHold it.
It seems to have good engagement accuracy, no wobble, and no slippage.
View detail