Reviews
By the thing which can separate a [Webike-monitor] tip, it was used by decomposition (front fork) of the part not arriving. After all, it was stabilized, and it has held and ended the work itself unsatisfying. In a sunday mechanic, although it doe
By the thing which can separate a [Webike-monitor] tip, it was used by decomposition (front fork) of the part not arriving.
After all, it was stabilized, and it has held and ended the work itself unsatisfying.
In a sunday mechanic, although it does not use so, a usage feeling is good.
Since the high thing thing had not been used, it was not found, but I have responded enough by Colet.
View detail
After arriving, wire for repair was cut or bent instantly, but it is KNIPEX truly. The ease of grasping is also dramatically good as well as the accuracy of a pliers part and a cutter part. A clear difference is known if compared with the thing of
After arriving, wire for repair was cut or bent instantly, but it is KNIPEX truly.
The ease of grasping is also dramatically good as well as the accuracy of a pliers part and a cutter part.
A clear difference is known if compared with the thing of a home center.
Although a value is stretched a little from other radio pliers, because it is rare to replace, it places with the radio pliers of KNIPEX and there is no loss.
We do not waver in the direction of liking to buy tidy radio pliers, but recommend you here.
View detail
When exchanging the front sprocket of KSR, since frequency in use increased although the loan thing was always used, it purchased for itself. Although circlip pliers of this sort have come out from various places and the elegance of the other company
When exchanging the front sprocket of KSR, since frequency in use increased although the loan thing was always used, it purchased for itself.
Although circlip pliers of this sort have come out from various places and the elegance of the other company has also been used, as quality, the pliers of a daytona are still places called the Massey kana.
(Dissatisfaction is not felt so efficient [ an honest cheap article ])
View detail
Radio pliers. It is said that it spread as a tool grasping electronic parts when assembling the circuit for radios literally a long time ago. It is radio pliers of a knipex which I am already using carefully since ten years. The point does not
Radio pliers.
It is said that it spread as a tool grasping electronic parts when assembling the circuit for radios literally a long time ago.
It is radio pliers of a knipex which I am already using carefully since ten years.
The point does not yet spread but it is a usage feeling [ like ] which continues being a new article.
They are radio pliers and the tool which the home center now sells also to the 100-yen shop from the first.
However, radio pliers of a knipex.
A partner is not wounded.
It is a tool gentle also to the partner who inserts.
It does not slide on a grip, either but stable.
I think that I will use throughout life.
The time which is using the pleasing tool is pleasant and work also progresses.
Although an expensive thing cannot be denied compared with other radio pliers, supposing it is a tool which can be used throughout life, I will think that I am a cheap tool.
It is high-precision and is one dish which wants to recommend radio pliers excellent in durability very much to the direction of search.
View detail
They are matchless pliers. The knipex of a favorite [ I ]. On the relation which carries out electric work at work, although it has many insulated tools, for the moment, the knipex of pliers is durability most. Are steel materials surely good?
They are matchless pliers.
The knipex of a favorite [ I ].
On the relation which carries out electric work at work, although it has many insulated tools, for the moment, the knipex of pliers is durability most.
Are steel materials surely good?
Even if can hold good pliers, they can be turned, and can be cut and it uses them for a long time, they do not wear out.
I think that the pliers of a knipex are the tools with which it is satisfied of them all.
Although a price is somewhat expensive, they are pliers to use for a direction to use one dish for for a long time by all means.
View detail
Fits: HONDA ADV150, HONDA PCX125, HONDA PCX125, HONDA PCX160, HONDA LEAD125, YAMAHA NMAX, YAMAHA CYGNUS X, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA MAJESTYS, YAMAHA NMAX155
it is use to address V125G K7 model -- even this comes out and exchange of a drive face and a clutch is possible. Although it is satisfactory in quality, does a value surely stretch a special tool? The direction which has concentration and nature
it is use to address V125G K7 model -- even this comes out and exchange of a drive face and a clutch is possible.
Although it is satisfactory in quality, does a value surely stretch a special tool?
The direction which has concentration and nature since the wages paid to Schopp can save considerably if it can tamper with a clutch system by itself is right or wrong.
certain NATSU O SU -- exchange of a drive-line -- 10,000 -- since it takes.
View detail
Although it thought whether a bolt was also a stainless, a bolt does not seem to be a stainless somehow. since it can use ordinarily as a band, it is satisfactory -- it is .
Although it thought whether a bolt was also a stainless, a bolt does not seem to be a stainless somehow.
since it can use ordinarily as a band, it is satisfactory -- it is .
View detail
It purchased for WR exchange of the cygnus X. Although the impact wrench performed removing, since impact was dreadful, bolting also used this! I think that it is user-friendly and I will use it also for exchange of a future oil filter. A price is
It purchased for WR exchange of the cygnus X.
Although the impact wrench performed removing, since impact was dreadful, bolting also used this! I think that it is user-friendly and I will use it also for exchange of a future oil filter.
A price is also handy and a recommend.
View detail
[Buying motive] The clip joint is used in the case of - chain exchange. - Although it was working by the adjustable wrench of the in-vehicle tool and the clip joint was able to be inserted in or removed, since it was not able to hold firmly, the clip
[Buying motive] The clip joint is used in the case of - chain exchange.
- Although it was working by the adjustable wrench of the in-vehicle tool and the clip joint was able to be inserted in or removed, since it was not able to hold firmly, the clip was gnawed several times and it had become a cause of next rust, etc. until now.
- It was considered as the pliers for a clip for exclusive use this time, and this product they are pliers useful for removal of the pliers product number:68094 description-of-item chain clip for DAYTONA daytona:chain clips. was purchased.
The [feature of goods] Since the die length of the level difference part pliers right and left of a clip and a pin is different as it understands with - photograph, a clip and a pin can be held certainly.
Since it swings wide and a crack is attached to a chain, it does not become precocious.
[Grading of goods] Compared with - adjustable wrench etc., work is very easy, and it is certain.
- A price also thinks that it is not too cheap too highly and it is good goods.
- They are four stars.
View detail
The thermoprotection lap was used to wind around an exhaust pipe. Although wire was enclosed as for other heat-resistant vantages, since the thermoprotection lap was an option, it was made into this of the cable tie type which is likely to be simply f
The thermoprotection lap was used to wind around an exhaust pipe.
Although wire was enclosed as for other heat-resistant vantages, since the thermoprotection lap was an option, it was made into this of the cable tie type which is likely to be simply fixable.
It has lock structure which will not return if it lets a band pass in a holder like a cable tie.
But when the band surface has a notch like a cable tie, it does not act as Locke by the nail in a holder, but a small metal ball is in a holder and it moves in the direction from which a band separates, it is the structure which the ball in a holder is caught, and presses down and acts as Locke of the band.
Therefore, even if it fastens with all its might, only a few returns.
I thought whether didn't notice the structure at first and it broke.
Fixation is possible firmly and a thermoprotection lap does not shift.
View detail
When removing the center nut of MX racer's clutch hub, it was used for the rotor maintenance for fixing a crank. Although had only the holder with a nail until now, but it slid since it was necessary to already turn a nut by hand of one of the two, ca
When removing the center nut of MX racer's clutch hub, it was used for the rotor maintenance for fixing a crank.
Although had only the holder with a nail until now, but it slid since it was necessary to already turn a nut by hand of one of the two, carrying out a baffle single hand when working alone, and the tool was dropped in many cases and the long time was required considerably,
If it is this tool, fixation is easy, and since work also progresses efficiently, it is very convenient.
Although it is recommended, I feel that it may be cheap to a slight degree for a price to Ho who takes an engine into pieces frequently.
View detail
From the last experience, an outer holder feels it as necessity and uses it at the time of clutch decomposition of the benly 50S. He thinks whether it can use, also when the direction of a flexible band holder will remove a flywheel in the future, and
From the last experience, an outer holder feels it as necessity and uses it at the time of clutch decomposition of the benly 50S.
He thinks whether it can use, also when the direction of a flexible band holder will remove a flywheel in the future, and it chooses from an outer holder for exclusive use here.
User-friendliness is good, and since fine adjustment is also effective, it is pleasing.
View detail
It purchased in order to remove the rotor of RZ. It is needed if various things are given for an engine by themselves. It is not more user-unfriendly at a handy price than at other manufacturers' thing. it can be used for other uses -- buying
It purchased in order to remove the rotor of RZ.
It is needed if various things are given for an engine by themselves.
It is not more user-unfriendly at a handy price than at other manufacturers' thing.
it can be used for other uses -- buying it, since that is right
View detail
although wiring was connected with insulating tape until now, trouble & wiring does not understand a tape volume frequently -- ? situation -- doing again finely with a plug terminal by ... It is useless ~ if ? which will be made with pliers etc. is th
although wiring was connected with insulating tape until now, trouble & wiring does not understand a tape volume frequently -- ? situation -- doing again finely with a plug terminal by ...
It is useless ~ if ? which will be made with pliers etc. is thought (sweat)!! A specialized tool is purchased immediately.
It failed several times until it got used, but when it gets used, it is also nothing that there is that no it is like ? with nippers until now [ Moro comfort O ] in a line piece!! If it has purchased earlier ... It is one article indispensable to wiring.
View detail
thinking [ which is not ] hard, in order to like to exchange the generator of TLM200 by oneself and to remove a flywheel -- this way and that -- although the means was provided and tried, it is too difficult at all. It is the order which found and pur
thinking [ which is not ] hard, in order to like to exchange the generator of TLM200 by oneself and to remove a flywheel -- this way and that -- although the means was provided and tried, it is too difficult at all.
It is the order which found and purchased this when searched with whether there are any good tools.
It was able to remove without losing the bolt firm quite firmly, when used instantly.
This can be used.
View detail
If there is even this, it can use even for an outer rotor as well as a pulley clutch. Since the skid of the portion of a band is a little weak, I am rolling and using the rubber tube. It is a gadget whose fine adjustment is also possible.
If there is even this, it can use even for an outer rotor as well as a pulley clutch.
Since the skid of the portion of a band is a little weak, I am rolling and using the rubber tube.
It is a gadget whose fine adjustment is also possible.
View detail
Fits: HONDA ADV150, HONDA PCX125, HONDA PCX125, HONDA PCX160, HONDA LEAD125, YAMAHA NMAX, YAMAHA CYGNUS X, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA MAJESTYS, YAMAHA NMAX155
In my case, although the original purposes of using this product seem to be the clutch outer of a scooter, and desorption assistance of a pulley, they are used as a baffle in the case of desorption of a flywheel. Although the make of the other company
In my case, although the original purposes of using this product seem to be the clutch outer of a scooter, and desorption assistance of a pulley, they are used as a baffle in the case of desorption of a flywheel.
Although the make of the other company and pure SST were also considered, this product was chosen on account of that it is not a tool used so frequently and a budget.
The diameter of a pin is with phi5.5, phi11, and a distance between pins of 45 mm ~ 145 mm.
Since it is not only for a flywheel although it is comment which work, it may be a little unsteady, but it is OK if it does thoroughly.
Although it is used for flywheel desorption of various vehicle types, it has played the role of a baffle without a problem.
It is preeminent for cost performance.
I thought that good shopping was carried out.
View detail
It is as it is truly stated only as for the motorcycle, and one shot can be made and it can caulk for it to be. Since it is merely pliers and pressure is not necessarily put perpendicularly, if compared with a product, a difference will come out.
It is as it is truly stated only as for the motorcycle, and one shot can be made and it can caulk for it to be.
Since it is merely pliers and pressure is not necessarily put perpendicularly, if compared with a product, a difference will come out.
Even if it still reinserts repeatedly compared with the thing of DIY Schopp to Kon and does not finish finely, since it is the result beyond it, it is recommended.
View detail
If this is used, an adjustable wrench cannot be used any longer. An ordinary spanner is not needed, either, if it is a place which is not narrow. or [ that more persons do not use why ] -- wonderful (do not know) ?http://bmwr80. blog. shin
If this is used, an adjustable wrench cannot be used any longer.
An ordinary spanner is not needed, either, if it is a place which is not narrow.
or [ that more persons do not use why ] -- wonderful (do not know) ?http://bmwr80.
blog.
shinobi.
The situation currently used for jp/here was raised.
The small size (180) also became wanting.
View detail
They are necessaries at maintenance of the pulley of a yamaha motor scooter, and a clutch. A just fit is carried out to the thing of any sizes. However, since it will become easy to slide a little if it embezzles, I use the bicycle tube for a skid
They are necessaries at maintenance of the pulley of a yamaha motor scooter, and a clutch.
A just fit is carried out to the thing of any sizes.
However, since it will become easy to slide a little if it embezzles, I use the bicycle tube for a skid into the portion of a band, covering.
View detail