Reviews
Brass Brush, this is the one.
[How is it used?
For cleaning each part during EngineOH
Was the one you received as per Image?
As per Image
How was your experience with it?
No problems at all. It is an excellent cosmetic product.
[Points to note]
None in particular.
How did it compare to other products?
This is all I do Repeat.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Easy to use
It is very convenient for maintenance of motorcycles because a small amount of grease comes out only as much as you press it, so you can apply it without getting your hands too dirty. View detail
Cheap but good
The air gun is powerful and has a good volume of air emission. View detail
I just wish I'd known about it sooner.
I bought it because it looked easy to use and most importantly, it looked cool after watching the video of the Suzuka 8 Hours Endurance Race.
As expected of KTC, the movement is smooth and will be active from now on.
I appreciate that such a useful item can be purchased at this price.
View detail
Rim inner rust remover use
Used to remove rust from the inside of the rim when replacing the tire on a CUB.
Scrub with this and a steel scrubber
It would be useful if it were available.
It's not something normal people have much use for, though.
View detail
Reliable Manufacturer Thickness Gauge
[How is it used?
YAMAHA XJR400R (07 year) Purchased for Gap adjustment and future EngineTappet adjustment of Plug to be used for
Was the one you received as per Image?
It was as shown in the Image, but it was smaller than I expected, so I am a little worried about how well I can adjust the Engine Tappet.
How was your experience with it?
It's working fine
Currently I only use it to adjust the Gap on the Plug, but I was able to adjust it without any problems.
[Points to note]
The product is quite thin, so care should be taken not to lose it or break it during use.
How did it compare to other products?
I have not used other products, so I can't speak much about them, but I am grateful to be able to purchase this product at this price.
These small parts tend to be expensive because they are not in high demand but need to be accurate. I am also grateful that KTC, a reliable manufacturer, is providing them.
Other items that would be helpful
Opinions and requests for Manufacturer:To be honest, I think it is a little difficult to use 9 sheets. It would be great if we could increase the number of sheets by at least one more and make more detailed adjustments.
View detail
It's being overworked hard!!!!
I have polished the fins of the Radiator and have used it extensively over the years, but it is still in good working order.
Not a lot of shedding, and for this low price, I can't complain!
Very Recommendation!!!!
View detail
Very easy to use!
I've been using it to polish up the Rust part and it's still going strong! I've been using it for about 10 years now.
The only sad thing about the Week Point is that the KTC letters are peeling off so fast…
View detail
cost-effective
[How is it used?
I have been doing my best with Spray cans as the opportunities for Repair painting of Tanks and Cowls have been increasing, but I took the plunge and introduced the Spray gun.
I chose this product because I had used it in the past, although this was the first time I had bought it myself.
Was the one you received as per Image?
It was just like the picture.
One-touch plug, mystery tool and Brush were also included.
How was your experience with it?
I think this product is easy to handle for beginners as well as for those who can easily adjust the blowout.
It rarely clogs, and the paint is not uneven.
The cup is removable for easy maintenance.
The tank is black, so the remaining volume is not visible, but you can tell the Large body by its weight.
[Points to note]
It is heavy and difficult to paint if you greedily add paint in one go.
In addition, because of the various adjustments that can be made, I think it is a large thing to find a good setting by carefully conducting a trial blow at first.
I think it is designed to be relatively easy for beginners to use, as it is generally intuitive to use.
How did it compare to other products?
I had used something a bit more expensive, but honestly felt this was easier to use for me.
I think it is sufficient for use within the scope of self-satisfaction as a hobby.
【Review】
It is easier to use as well as superior in quality to Chinese products.
There is no end to the list, but I think it is the most cost-effective of the Spray guns.
View detail
I'm a clumsy person.
I purchased the Locker Arm Tappet adjustment because it seems to be easier to fine-tune the Locker Arm if this angle is even slightly adjusted. View detail
As expected of KTC, easy to use for what it is.
I purchased this product together with CUB's RightSTAND when I installed it.
You can hold the hook part of the spring with pliers and hook it to the pin by force, but if the hook part gets scratched, it will lose strength, and it is not SMART.
It is not every day that Spring is replaced, but this was a small price to pay for the peace of mind it gave me.
View detail
To new.
It is reasonably priced and works well for rust removal, removal of bad stains, and polishing.
The one I had purchased before had been used for quite a long time and had become tired, so I was able to purchase a new one.
It is also reasonably priced, which is helpful as a consumable during maintenance.
View detail
Very effective for cleaning inner axles of Wheel, etc.
Purchased for maintenance of a friend's moped scooter.
It was mainly used to clean the inner axles of the Rear wheel and DrumBrake lever when replacing the Rear Drum brake.
First, apply Cleaner firmly, then add more Cleaner each time while polishing with this product.
The dirt was removed amazingly well.
We applied Grease while using this product as a brush at the end, so I think it has a lot of applicability.
Motorcycle parts are often inaccessible due to the large size of the body, so the large size was very useful this time.
Since it is not an expensive product, it should be disposable.
In that sense, I think it has excellent Cost performance.
One difficulty is the hardness of the brush part, which is made of gold, although this is to be expected due to the performance of the product.
Do not hold the Brush part with your hand when actually using it in your work.
View detail
KTC Tension Spring Tools
I did not have a proper tool for removing and installing springs, so I purchased KTC's Tension Spring Tools.
It is useful to have a well-made tool for maintenance of scooter and removal/attachment of exhaust system.
When I actually used it, I was able to use it with confidence because I could apply force firmly against the tool.
View detail
It's cheap
I bought this for the Piston Polish on my Brake and it was easy to use. I would have used the Tooth Brush if I had it, but I think the Tooth Brush is just fine. View detail
DAYTONA Rubber Seal Pick Tool Set
About quality and texture - Top quality. Solid steel shaft with no flex when used and a comfortable hard plastic handle. About the feeling of use - Comfortable to use for extended periods of time and easy to use in tight spaces due to their compact nature. Products to buy together - Daytons Garage offer many great tools but their magnetic silicone tray would be the best to added to the cart with the purchase of their pick tool set. Difficulty of installation - Very simple to work with these picks but do be care when using them close to your body as the ends are quite pointy and you can easily injure yourself. Cost performance and comparison with other products - Great pricing for a top quality set of 4 picks that will get many different job done for you due to their varied shaped ends and the best value pick tool set available here on Webike compared to the other brands. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - This set is perfect for working with O-rings but I would not recommend using them to help loosen radiator hoses as they are too small to handle the force required for that type of job. Look for some larger picks for that type of work. View detail
I use it to peel off O-rings, etc.
I use this product to peel off O-rings, etc. I used to have a lot of trouble peeling off old, hard-to-peel SCENE, but no more! I used to have old, hard-to-peel SCENE, but no more trouble! View detail
Easy to use
The wooden handle is easy to hold and the amount of Brush is abundant, which is a feature of Large.
It is very easy to use for removing dirt from Drive chain and rust from Parts.
Since it is Brass, it is hard to scratch the Gold genus and effectively removes Rust.
View detail
Good
It is useful for picking up Nuts and Bolts that have been dropped in a crevice.
The magnetic force is strong enough so that it will not fall off in the process.
Shaft free, so it is easy to reach the targeted area.
View detail
Convenient
The well-made design allows the Clip to be removed without bending.
The shape is good, so it is easy to fit into the gaps between panels, making it easy to work with.
Material:Plastic, so there is no need to worry about scratching.
View detail