Reviews
Brass Brush, this is the one.
[How is it used?
For cleaning each part during EngineOH
Was the one you received as per Image?
As per Image
How was your experience with it?
No problems at all. It is an excellent cosmetic product.
[Points to note]
None in particular.
How did it compare to other products?
This is all I do Repeat.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Easy to use
It is very convenient for maintenance of motorcycles because a small amount of grease comes out only as much as you press it, so you can apply it without getting your hands too dirty. View detail
I use it casually.
I use it for hand-tightening, and for quick ratchet, I use it as a "pusher-pusher".
The plus-ticky part is subtle, but it is a useful product if you have it.
View detail
I tried to exchange Seals.
I tried to replace the oil seal on the crankshaft of my LEAD125.
I couldn't replace it because the bracket was pulled out of the grip and the end of the pin was deformed.
I don't know if the strength is too weak or if only a smaller seal can be pulled out.
View detail
Cheap but good
The air gun is powerful and has a good volume of air emission. View detail
Having trouble finding a use for it?
[How is it used?
I have been wanting to get a Gold Brush for a long time, as the tooth brushes are too yucky and useless for removing persistent dirt, rust, etc. I have been looking for a Gold Brush for a long time.
I bought it as a trial because it was inexpensive for KTC.
Was the one you received as per Image?
I thought it would be about one size larger than Tooth Brush, but it was much larger than I imagined.
The wooden handle is a cheap-looking material with a reasonable price tag and does not seem to be very durable.
How was your experience with it?
I bought Gold Brush for the first time, and the brushed part is softer than I imagined, and it seems to be scratch-resistant, but it cannot scrape off dirt as hard as I would like.
However, since it is a Gold Brush, I am not sure to what extent it will not scratch the surface.
[Points to note]
For a tool novice like me, it would be good to buy tools with the feeling that they are useful once in a while if you have them.
Do not expect too much (laughs).
In addition, since different materials have different uses, it is important to find out in advance what you want to use the material for and what it is suited for.
View detail
I just wish I'd known about it sooner.
I bought it because it looked easy to use and most importantly, it looked cool after watching the video of the Suzuka 8 Hours Endurance Race.
As expected of KTC, the movement is smooth and will be active from now on.
I appreciate that such a useful item can be purchased at this price.
View detail
Rim inner rust remover use
Used to remove rust from the inside of the rim when replacing the tire on a CUB.
Scrub with this and a steel scrubber
It would be useful if it were available.
It's not something normal people have much use for, though.
View detail
rapid conversion (e.g. VCR, tape deck, etc.)
Easy to turn by hand, easy to use to turn the Size difference by conversion, but a little difficult to take off when removing.
It's nice because it's compact and doesn't take up much space for in-vehicle use.
View detail
Reliable Manufacturer Thickness Gauge
[How is it used?
YAMAHA XJR400R (07 year) Purchased for Gap adjustment and future EngineTappet adjustment of Plug to be used for
Was the one you received as per Image?
It was as shown in the Image, but it was smaller than I expected, so I am a little worried about how well I can adjust the Engine Tappet.
How was your experience with it?
It's working fine
Currently I only use it to adjust the Gap on the Plug, but I was able to adjust it without any problems.
[Points to note]
The product is quite thin, so care should be taken not to lose it or break it during use.
How did it compare to other products?
I have not used other products, so I can't speak much about them, but I am grateful to be able to purchase this product at this price.
These small parts tend to be expensive because they are not in high demand but need to be accurate. I am also grateful that KTC, a reliable manufacturer, is providing them.
Other items that would be helpful
Opinions and requests for Manufacturer:To be honest, I think it is a little difficult to use 9 sheets. It would be great if we could increase the number of sheets by at least one more and make more detailed adjustments.
View detail
It's being overworked hard!!!!
I have polished the fins of the Radiator and have used it extensively over the years, but it is still in good working order.
Not a lot of shedding, and for this low price, I can't complain!
Very Recommendation!!!!
View detail
Very easy to use!
I've been using it to polish up the Rust part and it's still going strong! I've been using it for about 10 years now.
The only sad thing about the Week Point is that the KTC letters are peeling off so fast…
View detail
cost-effective
[How is it used?
I have been doing my best with Spray cans as the opportunities for Repair painting of Tanks and Cowls have been increasing, but I took the plunge and introduced the Spray gun.
I chose this product because I had used it in the past, although this was the first time I had bought it myself.
Was the one you received as per Image?
It was just like the picture.
One-touch plug, mystery tool and Brush were also included.
How was your experience with it?
I think this product is easy to handle for beginners as well as for those who can easily adjust the blowout.
It rarely clogs, and the paint is not uneven.
The cup is removable for easy maintenance.
The tank is black, so the remaining volume is not visible, but you can tell the Large body by its weight.
[Points to note]
It is heavy and difficult to paint if you greedily add paint in one go.
In addition, because of the various adjustments that can be made, I think it is a large thing to find a good setting by carefully conducting a trial blow at first.
I think it is designed to be relatively easy for beginners to use, as it is generally intuitive to use.
How did it compare to other products?
I had used something a bit more expensive, but honestly felt this was easier to use for me.
I think it is sufficient for use within the scope of self-satisfaction as a hobby.
【Review】
It is easier to use as well as superior in quality to Chinese products.
There is no end to the list, but I think it is the most cost-effective of the Spray guns.
View detail
For Air dusterDebut.
[How is it used?
I installed Compressor at home and bought it for skipping water after car wash and for carburetor cleaning.
I chose this product because it is the first pc. that I am buying for myself, so I thought it would be a good idea to start with an inexpensive one.
Was the one you received as per Image?
It arrived exactly as pictured.
However, the Body is full of plastic feel and cheap.
One-touch plug is included.
How was your experience with it?
I thought it was normal and easy to use.
Smooth operation without any particular snagging.
There are no air leaks or damage, and well, I felt it was well done for the price.
[Points to note]
Not particularly
Even beginners can use it as soon as it arrives.
How did it compare to other products?
I have used the ones made TIGHTLY by Gold, but I think this product is also sufficient for air delivery.
Body texture is inevitably inferior, so be careful if you are particular about the Garage's atmosphere.
【Review】
The Body is cheap but functional enough.
If you are not particular about the Nozzzle shape, etc., I think you can't go wrong with this product.
View detail
it is normal
I bought it to use when I want to remove it with a little force.
There are no special features, but they are usable as usual.
View detail
I'm a clumsy person.
I purchased the Locker Arm Tappet adjustment because it seems to be easier to fine-tune the Locker Arm if this angle is even slightly adjusted. View detail
Love this for my bikes plugs!
I haven't bought a gap tools for over years. Turns out mine were all too big. This fills the bill being light and easy to use.Handy tool to have in your moto box. Well made, durable, works as it should, and looks cool as well! No complaints here.I use it more to open a nice cold adult beverage than i do for gapping spark plugs, but it works great for both! View detail
Objective not met.
I purchased pcxjk05 for LowdownRear shock adjustment but the space around the Shock was too narrow to fit.
I will use it elsewhere...I wonder if there will be a time to use it.
In case you are wondering, the Wrench that came with the Mukawa Shock that I used to replace the Shock on my SUPER CUBC110 didn't fit either, so I bought this product.
View detail
Standard products in Eyelet Punch
Purchased to create a hole for Carabiner on Baseball cap to be used when getting off Motorcycle. It expands the range of carrying options.
The product feels solid and usable, and there are no problems. The product comes with an eyelet, so it can be used right away.
It is also reasonably priced, so you can use it in various ways if you have one.
View detail
As expected of KTC, easy to use for what it is.
I purchased this product together with CUB's RightSTAND when I installed it.
You can hold the hook part of the spring with pliers and hook it to the pin by force, but if the hook part gets scratched, it will lose strength, and it is not SMART.
It is not every day that Spring is replaced, but this was a small price to pay for the peace of mind it gave me.
View detail