Reviews
rapid conversion (e.g. VCR, tape deck, etc.)
Easy to turn by hand, easy to use to turn the Size difference by conversion, but a little difficult to take off when removing.
It's nice because it's compact and doesn't take up much space for in-vehicle use.
View detail
Well this
I purchased this product to polish the base of the exhaust pipe (chamber) of my DT50 because the paint had peeled off after years of use and it was rusted and gunky.
It didn't fall off as hard as I thought it would. I think it would have been better to use something like a jetter or TippingHammer to roughen it up a bit and then polish it.
The handle is a little difficult to hold. I think it would be easier to use if the corners around the grip were removed
View detail
For Plug cleaning
I bought this brass brush for Spark plugs as a trial for cleaning plugs and removing carbon.
The hardness of the Brass Brush and the comfort and ease of use of the wooden Handlebar are good. May it be done quite nicely.
View detail
Easy to use
I used it to remove rust from Parts and Rust from Chain.
Wire has good hardness and sufficient density, making it easy to use and work well.
It is easy to hold and efficiently drops Rust, which increases work efficiency.
View detail
Surprisingly difficult
I bought it because I thought it would be convenient.
Since it is a KTC, the texture is solid and not easily broken.
The grip is also processed to prevent slipping.
It does not slip when turned with greasy hands and is functionally up to par.
Just my opinion after using it.
I'm not sure if it would be dramatically more convenient, but it's quite a hassle to put it on and take it off.
Always use a quantity on the Ratchet Handlebar rather than a Single Body.:Set and then use the
I feel that it will be used by turning it around when it is loose.
I don't suddenly loosen the bolt on the Ratchet Handlebar, and the Ratchet Head is too big to fit in tight places.
The situations in which they are used are currently limited.
Usage may need to be considered.
View detail
Not manufactured by KOWA in Japan
I was happy to find what I thought was a prybar set manufactured in Japan but I'm sad to report these are not manufactured in Japan by Kowa. It states right on the original packaging Made in Taiwan but the package is slipped into a plastic bag with a Kowa sticker stating Made in Japan. These are most definitely Made in Taiwan. The still function great as pry bars and work fine I just wish they were a genuine Japan manufactured product. View detail
Although I bought it.
I thought it might be useful.
I'm not sure which scene I'm going to use it for, it's been sitting in my toolbox.
Someday the sun will shine!
View detail
Texture is not good. For infrequent use.
I bought this to replace my Seal.
It may be available in 100-yen stores, but I bought it because it was too much trouble to check or go see.
The deciding factor in the purchase
Quantity because you have to repurchase it if it is ruined in 1 pc.:I bought this because it is more than 2pc and it is a DAYTONABrand product.
It is not cheap when compared with it because it seems to be in the 100-yen, but the price was acceptable in that because it is usually around 1000 yen when it buys it in Net.
[Impressions of using it]
I used it to replace the Seal and had no problems with it.
The body is quite hard, so if you don't work too hard, it won't bend.
As you can see in the picture, the handle is pretty cheap. Well, for Sunday mechanic, it was enough for the need.
Products compared
Compared with Pick tool of Tool Manufactureretc.
I chose this product because the ones from ToolManufacturer were relatively expensive and I didn't need it to be so solid.
【Review】
The quality of the product itself is subtle, but to the extent that Sunday mechanic works on it, it's fine.
It seems to be severe in the part where the force of Fork sealetc. is necessary though it is in the note because it is cheap.
Also, it is just on a plastic tray, so there is no container. Since it is a sharp tool, you might want to prepare a container separately.
View detail
Active in tight spaces
The length and angle of the Compact can be adjusted freely and it is very easy to use in a small space. It is easy to check for oil leaks in hard to see places. View detail
It is fully functional
It works well as a Gap adjustment for the Spark plug
It's neither more nor less than a feature, but it's beautiful to look at It is AluminumMaterial, so there is no need to worry about Rust
The price is high, but I was satisfied
View detail
Extremely useful
Motorcycleetc with Cowl. , Perfect for fine work.
However, in places where hands are difficult to enter, the place where the tool can move is also limited, so GEAR's piece is even better if it is a little finer.
View detail
Uh huh...
I purchased it for Grease up of Wheel bearing this time.
Things are never bad and it is not a hard to use, but considering the price it means that there are as many substitute items as there are in Haka-yon and Home center and it is not enough to buy it.
View detail
I do not have a chance to use it easily
I purchased it thought that it was convenient, but the use frequency is low.
While it seemed convenient that Driver had to press from above, it seemed convenient and tried purchasing.
I expect that obstacles are at the end and they will be active at Situation where Driver can not be used.
It will be a while for a while until then.
View detail
The use seems to be quite limited
I purchased it thought that it was convenient, but the use frequency is low.
For my maintenance use, there was nothing to buy here, Ratchet alone was enough.
Perhaps, in case of temporarily assembling the Engine, it should be useful in a scene equipped with many Nut of the same Size.
While expecting to come across a scene that comes in handy, you will be waiting for a while for a while.
View detail
The KUKKO currently used as a Puller in the company. Since the Attachment at the tip of has been cracked, it offers that he wants a new tool and is... if it purchases in the legitimate channel (from the machine delivery Manufacturer of a Ge
The KUKKO currently used as a Puller in the company.
Since the Attachment at the tip of
has been cracked, it offers that he wants a new tool and is... if it purchases in the
legitimate channel (from the machine delivery Manufacturer of a Germany) ... they were the estimates 25 and 000.
-- when saying so, it was treating by a KUKKO and Mr. webike -- If .. is thought and it searches .. it was.
-- moreover, it damaged -- at least the end part is sold -- carrying out -- ~♪ --
-- above all, there was little expense and it ended.
View detail
Convenience is also dramatically expensive in the ability to use in a narrow place.
Convenience
is also dramatically expensive in the ability to use in a narrow place.
View detail
The portion which becomes an elevated temperature most immediately after the engine side flange of a Chamber. It rusts here easily very. since it is the Restore -- with much trouble -- therefore -- the Chamber was also refreshed.
The portion which becomes an elevated temperature most immediately after the engine side flange of a Chamber.
It rusts here easily very.
since it is the
Restore -- with much trouble -- therefore -- the Chamber was also refreshed.
First of all, it is rust dropping intently with this Wire brush.
Next, it is a sanding Sponge.
It is from 180 to 400 about
and a water resistant paper.
The portion without the
Rust omits a Brush and a Sponge.
It finishs that it is also at
by thick coating of a heat-resistant Paint.
View detail
It purchased in order to extract the bearing collar of the Stainless bearing of NSR250R. Since the width of tooth of 22 mm is quite a larger Size, those who are used for the same use think that what has width narrow to a slight degree is suitabl
It purchased in order to extract the bearing collar of the Stainless bearing of NSR250R.
Since the width of tooth of 22 mm is quite a larger Size, those who are used for the same use think that what has width narrow to a slight degree is suitable.
- which is helpful since the hard Race escaped only from that somehow -- when carrying out the leaving talk, it was very helpful, but if quality is also common and usually considers the thing of a delivery date or a mailing cost, the Home-center purchase of a price is first.
It is not necessary to hurry, and when placing an order for adjustment of mailing cost no charge, I think ant kana.
View detail