Reviews
It is ♪ satisfaction which efficiency went up to fixing!
It is ♪
satisfaction which efficiency went up to fixing!
View detail
SIGNET 65331 It is an Impact wrench of 1 / 2 angle Drive. Since the Impact wrench of 1 / 2 angle Drive domestic usual Size used for ten years or more had come to have felt it heavy, it decided to update, since it gains that it is a Sale and is
SIGNET 65331 It is an Impact wrench of 1 / 2 angle Drive.
Since the Impact wrench of 1 / 2 angle Drive domestic usual Size used for ten years or more had come to have felt it heavy, it decided to update, since it gains that it is a Sale and is pleasing at the shop front of a tool store.
As the
photograph, though it is 1 / 2 angle Drive, the Size of 3 / 8 angle Drive and weight are also approximately the halves of the Impact wrench of 1.1 kg, and 1 / 2 angle Drive usual Size, since a center-of-gravity position is near the Grip, also single hand, it can brandish and a small turn is effective, and it is easy to treat.
Though it is this Size, from 540-Nm Torque 出せます standard as 1 / a 2 angle Drive,
The Wheel nut of a car can manage the work up to about 100 Nm ~ about 140 Nm, such as a Rear-axle Nut, a Drive sprocket, a Clutch center, and a Pulley, without difficulty, if it is natural (there are probably most these uses) and a Motorcycle.
Since
positive rotation (right) can perform a three-step Torque change, if it grasps to what Nm it tries, strikes and carries out in a specific conclusion part, and is set, it uses conveniently.
It is although I use only in the direction loosened by counterrotation (left) full admission. -- The change of
positive counterrotation can be operated as [ Grip 握った ] with the Lever beside a Trigger.
Although it is in the position of the right-hand thumb at the time of
shipment, I think that it will be a kind design that setting out can be changed now so that the reverse side of a Grip, i.e., a left hand, can use if it is made to rotate 180 degrees, pulling a Lever.
The Air inlets are also swivel mounts which cancel Hose 捻れ again.
Although it is made in Taiwan, 銘 of SIGNET is also contained, and since the
main part is handling of firm import origin, it thinks that maintenance service is also satisfactory.
It is one article of a Recommendation at
サンメカ.
View detail
It is a tool as considerate !. It has in work [ at a narrow place ], and is deep. I am glad if it says as [ my ] just for a moment, and the number of section of a GEAR is finer. After loosening, operation has become possible with a
It is a tool as considerate !.
It has in work [ at a narrow place ], and is deep.
I am glad if it says as [ my ] just for a moment, and the number of section of a GEAR is finer.
After loosening, operation has become possible with a finger, but it is that whether to turn by lighter power is easier-to-use here.
While using, it hopes to become good touch.
View detail
[Webike Monitor] It is used in the case of maintenance of the Motorcycle. Work can be done more quickly than a Ratchet. Although it is a Sliding head, since it is fixed firmly than expected, a Torque can also be applied firmly. It becomes eas
[Webike Monitor] It is used in the case of maintenance of the
Motorcycle.
Work can be done more quickly than a Ratchet.
Although it is a Sliding head, since it is fixed firmly than expected, a Torque can also be applied firmly.
It becomes easy to work, using together with an Extension.
Since there is also a part made only in the
Ratchet, of course in all work, it cannot use, but working efficiency is gathered in the part which can use this tool using T character.
View detail
In case of usual maintenance of a Motorcycle, even if there is no honesty, I think whether to become somehow by other tools, but it is very convenient if you are!! When it is on a 4-cylinder vehicle that it is especially a Recommendation and the
In case of usual maintenance of a Motorcycle, even if there is no honesty, I think whether to become somehow by other tools, but it is very convenient if you are!!
When it is on a 4-cylinder vehicle that it is especially a Recommendation and the oil is changed by itself, it is a time of removing a Muffler.
Although it is a tool used at the time of maintenance of a Drum brake originally [
],
When removing the Spring of a Muffler-joint part like a photograph, it is found useful very much ^^
That Spring,
The splendid Tension is applied, there is nothing also by a tool [ which will suffer troubles very well if it tries to pinch and remove with a Radio pliers something ]
Bulky, and 1 and the safe product made from KTC are good in a tool box.
View detail
"It is used for dropping rust in a metal part and cleaning of a power unit. The brush of resin is used previously, and it is used when it is hard to clean. If I clean by the original which mixed oil with kerosene, most dirt is cleaned off so that I'm happ
"It is used for dropping rust in a metal part and cleaning of a power unit. The brush of resin is used previously, and it is used when it is hard to clean. If I clean by the original which mixed oil with kerosene, most dirt is cleaned off so that I'm happy to see a beautiful motorcycle." View detail
An Extension bar combines and it uses it as a T type Wrench. The best places of this tool are a place on which the Stopper takes the side of one side of a bar, and it can impose a Torque with all its might, and a place on which a bar is pulled out, and it
An Extension bar combines and it uses it as a T type Wrench. The best places of this tool are a place on which the Stopper takes the side of one side of a bar, and it can impose a Torque with all its might, and a place on which a bar is pulled out, and it applies to a Glasses wrench etc., and can impose a Torque with all its might. View detail
It purchased here to KTC tool bags. It is solid, so that the substitution driver which is KTC truly is made to be forgotten.
It purchased here to KTC tool bags.
It is solid, so that the substitution driver which is KTC truly is made to be forgotten.
View detail
Since it is an oil pressure, there is little power and it ends. Although the very end is serious in case of a screw type, this is made by fixed power. When there is much number of times, it can work comfortably.
Since it is an oil pressure, there is little power and it ends.
Although the very end is serious in case of a screw type, this is made by fixed power.
When there is much number of times, it can work comfortably.
View detail