Reviews
Brass Brush, this is the one.
[How is it used?
For cleaning each part during EngineOH
Was the one you received as per Image?
As per Image
How was your experience with it?
No problems at all. It is an excellent cosmetic product.
[Points to note]
None in particular.
How did it compare to other products?
This is all I do Repeat.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Easy to use
It is very convenient for maintenance of motorcycles because a small amount of grease comes out only as much as you press it, so you can apply it without getting your hands too dirty. View detail
I use it casually.
I use it for hand-tightening, and for quick ratchet, I use it as a "pusher-pusher".
The plus-ticky part is subtle, but it is a useful product if you have it.
View detail
Having trouble finding a use for it?
[How is it used?
I have been wanting to get a Gold Brush for a long time, as the tooth brushes are too yucky and useless for removing persistent dirt, rust, etc. I have been looking for a Gold Brush for a long time.
I bought it as a trial because it was inexpensive for KTC.
Was the one you received as per Image?
I thought it would be about one size larger than Tooth Brush, but it was much larger than I imagined.
The wooden handle is a cheap-looking material with a reasonable price tag and does not seem to be very durable.
How was your experience with it?
I bought Gold Brush for the first time, and the brushed part is softer than I imagined, and it seems to be scratch-resistant, but it cannot scrape off dirt as hard as I would like.
However, since it is a Gold Brush, I am not sure to what extent it will not scratch the surface.
[Points to note]
For a tool novice like me, it would be good to buy tools with the feeling that they are useful once in a while if you have them.
Do not expect too much (laughs).
In addition, since different materials have different uses, it is important to find out in advance what you want to use the material for and what it is suited for.
View detail
I just wish I'd known about it sooner.
I bought it because it looked easy to use and most importantly, it looked cool after watching the video of the Suzuka 8 Hours Endurance Race.
As expected of KTC, the movement is smooth and will be active from now on.
I appreciate that such a useful item can be purchased at this price.
View detail
Rim inner rust remover use
Used to remove rust from the inside of the rim when replacing the tire on a CUB.
Scrub with this and a steel scrubber
It would be useful if it were available.
It's not something normal people have much use for, though.
View detail
rapid conversion (e.g. VCR, tape deck, etc.)
Easy to turn by hand, easy to use to turn the Size difference by conversion, but a little difficult to take off when removing.
It's nice because it's compact and doesn't take up much space for in-vehicle use.
View detail
Reliable Manufacturer Thickness Gauge
[How is it used?
YAMAHA XJR400R (07 year) Purchased for Gap adjustment and future EngineTappet adjustment of Plug to be used for
Was the one you received as per Image?
It was as shown in the Image, but it was smaller than I expected, so I am a little worried about how well I can adjust the Engine Tappet.
How was your experience with it?
It's working fine
Currently I only use it to adjust the Gap on the Plug, but I was able to adjust it without any problems.
[Points to note]
The product is quite thin, so care should be taken not to lose it or break it during use.
How did it compare to other products?
I have not used other products, so I can't speak much about them, but I am grateful to be able to purchase this product at this price.
These small parts tend to be expensive because they are not in high demand but need to be accurate. I am also grateful that KTC, a reliable manufacturer, is providing them.
Other items that would be helpful
Opinions and requests for Manufacturer:To be honest, I think it is a little difficult to use 9 sheets. It would be great if we could increase the number of sheets by at least one more and make more detailed adjustments.
View detail
Very easy to use!
I've been using it to polish up the Rust part and it's still going strong! I've been using it for about 10 years now.
The only sad thing about the Week Point is that the KTC letters are peeling off so fast…
View detail
I'm a clumsy person.
I purchased the Locker Arm Tappet adjustment because it seems to be easier to fine-tune the Locker Arm if this angle is even slightly adjusted. View detail
As expected of KTC, easy to use for what it is.
I purchased this product together with CUB's RightSTAND when I installed it.
You can hold the hook part of the spring with pliers and hook it to the pin by force, but if the hook part gets scratched, it will lose strength, and it is not SMART.
It is not every day that Spring is replaced, but this was a small price to pay for the peace of mind it gave me.
View detail
KTC Tension Spring Tools
I did not have a proper tool for removing and installing springs, so I purchased KTC's Tension Spring Tools.
It is useful to have a well-made tool for maintenance of scooter and removal/attachment of exhaust system.
When I actually used it, I was able to use it with confidence because I could apply force firmly against the tool.
View detail
Costa bad!
I have the one from Tone and it is convenient, so I bought it to see if there is a difference.
I bought the one from Tone for 800 yen on Amazon, but this one is about 1300 yen.
As for the quality of things, I think Tone is better. (Material is iron over there?).
This is Plastic.
It is marked every 90-degrees, so if you want to tighten angles or if you don't want to use KTC, you can buy this one.
Personally, I prefer tones as a cosmetic and object.
View detail
At the back of the toolbox.
This one is always in the back of the tool box. w
I don't get a chance to use it very often, but it is in the back of my tool box, wondering when I will use it.
The handle is easy to use and easy to apply force.
View detail
It's a must-have, the soul in a small tool?
I am the second generation as my predecessor is getting tired.
It can be used to turn the bolt and nut of the Small Torque by hand, and after tightening the bolt to a certain degree, it can be used to manage the Torque with the digital ratchet at the end.
I am Regular in almost Bolt nut fastening work, such as from narrow and normally medium Torque is using Large body.
To prevent breakage, the Ratchet is then fitted and fastened to the Ratchet when turning it by hand, which allows for quicker work.
The resin part is good-looking, but KTC's product is lighter than other companies' products, so perhaps this resin is fine.
Furthermore, I think the reason for the "Pink" resin is to make it stand out in the tool box so that it can be easily picked up.
If my guess is correct, I'm convinced that KTC is the quintessential KTC.
View detail
Good
It is useful for picking up Nuts and Bolts that have been dropped in a crevice.
The magnetic force is strong enough so that it will not fall off in the process.
Shaft free, so it is easy to reach the targeted area.
View detail
Convenient to have
I bought it because it picks up Bolt, etc. dropped in the crevices.
It has sufficient magnetic force and is Flexible and bendable to pick up objects even in tight spaces.
The texture is also solid as it is made by KTC.
It doesn't feel like it will break while in use.
If you do your own maintenance, especially around the Engine
I think it is essential to have it.
However, the price is high.
The evaluation may differ depending on what you think of this price.
View detail
Surprisingly difficult
I bought it because I thought it would be convenient.
Since it is a KTC, the texture is solid and not easily broken.
The grip is also processed to prevent slipping.
It does not slip when turned with greasy hands and is functionally up to par.
Just my opinion after using it.
I'm not sure if it would be dramatically more convenient, but it's quite a hassle to put it on and take it off.
Always use a quantity on the Ratchet Handlebar rather than a Single Body.:Set and then use the
I feel that it will be used by turning it around when it is loose.
I don't suddenly loosen the bolt on the Ratchet Handlebar, and the Ratchet Head is too big to fit in tight places.
The situations in which they are used are currently limited.
Usage may need to be considered.
View detail
Exhaust System Installation
In the manual Do not use it for anything other than Drum brake work." but the Exhaust Joint will not be a problem.
The special tool made it easy to apply force and easily fasten Spring.
I think it could be a little cheaper.
View detail
Thickness Gauge
About quality and texture - Excellent quality, nicely stamped steel sheet with no rough edges. About the feeling of use - I have the longer set which works great in all the situations I have used them in so far, allowing for two hand operation. Products to buy together - Great idea to add a spark plug gapping tool to your measurement tooling, NeoFactory have a nice afforadable one, product # 016520. Difficulty of installation - Easy to select the correct size with the nice visible labelling on each guage and easy to manoeuvre with the long series gauge set. Cost performance and comparison with other products - The long series set is expensive and if you can afford it worth the extra cost but Webike have more afforadable options in their hand tooling others menu. About shipping and packaging - Arrived on time and without damage from the well packed and affordable sea freight. Any concerns, cautions, or advice when purchasing - Read the product listings for the thickness gauges carefully as some are labelled in mm and inches but not all. View detail