Reviews
Simple form and easy to use
I was looking for a simple and reliable tool like an in-vehicle plug wrench from a well-known tool manufacturer, and I found this product and immediately bought it because of its low price.
The price is a bargain, but the quality is so high that it fits perfectly with the plug diameter, as you would expect from a KTC product.
The rubber inside the wrench gently holds the plug in its mouth so that there is no danger of dropping it when it is removed.
Also, the tool is available in two different thicknesses at both ends:16mm = CPlug and 20.8mm = BPlug, so it can be used with CUB and MONKEY. (CPlug) and 2-stroke VESPA (BPlug) This is more convenient for me as an owner of a
However, since it is a straight type, it may only be used on cars with a large space above the plug hole.
The L-shaped bar is also very easy to use because of its ingenuity in making it possible to use it even for car models that are difficult to get space to turn.
The simple shape makes it easy to pack, so it would be excellent as an in-vehicle or portable tool.
Durability is still unknown, so it was not rated yet.
View detail
Easy Plug replacement
I've been using the OEM plug wrench for a while now and it has definitely made my work easier. View detail
Versatile Plug wrench
[Need to replace Plug].
For plug replacement, according to the Manufacturer, the standard replacement distance for normal plugs is 3,000 to 5,000 km.
It may seem early, but at least in PlugManufacturer's opinion, it is not a part that should be used for 10,000 km or 20,000 km.
Therefore, the frequency of replacement is considered to be relatively high for consumables with the same replacement cycle of oil, etc.
Plug wrench
Plug wrench is indispensable to connect and disconnect the spark plug when replacing it. 。 May be included in the on-board tools, but can be purchased separately 。
Different engines are equipped with different plugs, and each plug has a different screw diameter and a different hexagonal wrench.
In my case, since I own several motorcycles, each plug has a different screw diameter, so I need to have one for each. 、、、、、
It is Large strange to have each of them, so I bought this 3-wayType Plug wrench.
Motorcycle plugs are often designed with a screw diameter of 16 to 21mm, which means that you only need one large half-size plug.
Details of this product
■Short (Length:73mm)
Size
B Type(Hexagon Width across Flats):20.8mm)→SR400
D Type (Hexagonal diagonal:18.0mm)
C Type (Hexagonal diagonal:16.0mm) →CUB
However, if you use a water-cooled 4-stroke engine with a compact design and a deep plug hole, a Wrench with a thick socket may not be able to reach the plug due to interference. GSX-R125 is a water-cooled DOHC engine, so it is not long enough to be used here.
It is necessary to check the inner diameter of the plug hole and the outer diameter of the socket.
How to exchange Plugs.
1・When installing a new Plug, turn it with your finger until it hangs firmly on the Screw threads.
2・When you cannot turn the plug wrench with your fingers, use the RubberTube or a special tool.
*Over-tightening and over-loosening are also discouraged.
*If gravel or dust accumulates around the plug, remove it by scrubbing with an air blower or brush, regardless of whether it is water-cooled or air-cooled. Failure to do so will loosen the Plug, and if water flows into the combustion chamber or gravel clogs the Plug hole, extra labor will be required to remove them.
It is important to understand that performing one step before the work is done will result in time savings.
good point
The system can be used for most types of vehicles, so it is safe to use only one.
Low price. 800 yen or less for this function, I think it is a good cost performance.
Disadvantage
Plug holes with narrower plug holes, such as water-cooled and DOHC, cannot be accommodated.
Even with the widespread use of fuel injection and Digital control of the ignition system, the spark plug is still one of the most important components of the Gasoline engine.
Since the screw diameter and the dimension of the opposite side of the hexagonal part on which the wrench hangs differ depending on the plug, you must obtain a wrench that is compatible with your car.
It is up to you to decide whether or not you want to have each of them, but I think it is attractive to be able to have them all in one package.
We would like to recommend to those who have more than one car and those who are going to replace or increase their cars.
View detail
For Plug for NSR250R
I was able to use it on my NSR250R with no problems.
To use it on the NSR250R mc18, a longer extension bar is needed because the cowl bracket is too much.
View detail
Substitution of on-board tools!
Used for replacing a plug on NC750X. It may be the best match for NGK plugs. View detail
Commonly usable
Purchased at Point
If it is too cheap, it will crack, so I bought a trustworthy DAYTONA.
The feel of the product is fine!
View detail
For Plug Replacement
I bought this to replace a plug in my Naked motorcycle, with Magnet so it doesn't fall off after it comes off. View detail
Magnet is good.
Thanks to Magnet, it is very easy to put on and take off.
I would recommend this to anyone who struggles with Plug replacement.
View detail
It was easy even for the first time.
I bought this product to try plug replacement.
This was my first plug replacement job and I found this Wrench very easy to use.
View detail
This is handy.
Mast is especially useful for Scooter and other hard-to-access structures.
Magnet does a good job.
One drawback is that Material:I had a hard time understanding the instructions on how to remove the plastic tag-like thing because the text and illustrations were too small. In fact, it was easier to replace the plug.
View detail
Even a beginner could handle it easily.
I purchased this for my first Plugfor Replacement.
A moped is sufficient.
View detail
Necessities
[How is it used?
I compete in Enduro races with my RM250, and since it is a 2-stroke, I often have to change plugs, and I have been using this plug wrench for a long time.
I lost it during a Race the other day and had to buy it again. My Machine does not have good access to Plug, so I have to choose this Wrench.
Was the one you received as per Image?
As per Image. And I used to use it.
How was your experience with it?
The length is still exquisite. It is possible to reach the Plug by passing through the Glasses. The Glasses part is notched so that it can be inserted through the plug's guyliner.
[Points to note]
How did it compare to other products?
I think there was a good one from HondaOEM Parts, but I heard through the wind that it has been discontinued.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Plug replacement for SCUB
When replacing the plug of a SUCUB, I purchased Emon's plug wrench (16mm) because the plug replacement is too large to be done with an in-vehicle tool. The plug position of the SCUB is narrow and the plug is deep into the car, so it is difficult to work on the plug. The plug was replaced with a Standard Plug BP5HA NGK (CR7EK 7546). View detail
HrankDrive at this price!
The price is unbeatable for a full-rankDrive Socket.
It is also convenient to use both Wrench and SocketHand.
View detail
Only Exclusive Products
The one I purchased was a DPlug exclusive.
It's a good fit, and it's a good fit.
It is an excellent product that is also easy to apply force.
View detail
What's the use?
The DT50 has a Spark plug hex on the Cylinder head, so it was easy to remove with a MONKEY Wrench.
But with the 4st Engine, it is in the bottom of a deep hole, so the choice is to use Deep socket or a product like this.
It is a standard product that has been around for a long time, but it is still a longtime seller and is easy to use.
View detail
CRF250RALLY Plug replacement
17"CRF250RALLY has reached 13,000 km distance after 5 years, so I replaced the plug.
DOHCHead has a long distance to the seat of the plug, so we attached an extension bar of about 5 cm to the plug wrench.
The Left SideCowl was removed, and although the work was done in a tight space, the Socket allowed the Plug to be removed without falling off.
View detail
NGK.DENSOPlug either is acceptable
There is another Plug wrench, but the size did not fit, so I bought the size that fits.
KTC is safe and secure, and there are no problems with its use.
It is almost never replaced, so it will last a lifetime.
View detail
Easy to use
Flexible type for Motorcycle Plug replacement is easy to access even if there is an obstacle.
It is very useful around the Cylinder head because Wiring and other obstacles are in the way.
The angle of the wrench can be freely changed to accommodate almost any situation.
View detail
Convenient
A plug wrench would be useful.
It holds the Plug securely, making it easy to attach and detach.
I think it is a high quality and cost-effective product.
View detail