Reviews
Fits: SUZUKI SKYWAVE650 burgmanLX, SUZUKI DL1000 V-STROM650X, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM650, SUZUKI GSX1300 HAYABUSA, SUZUKI V STROM 650, SUZUKI V STROM 1050
DL1000 V-STROM250 for initial Oil replacement and Oil Filterfor replacement.
I purchased this for the first Oil replacement and Oil Filterfor replacement of DL1000 V-STROM250.
I was able to replace the Oil Filter without any problems.
The Bolt hole in the middle makes it easy to remove the Oil Filter.
View detail
Universal but...
I was looking for a Universal Oil filter wrench and found this one.
Compared to other companies' products, we chose this one because it can accommodate a large diameter.
In fact, I used it for Oil replacement and found it very nice that the Socket is compatible with 9.5 and 12.7.
However, the part that grips the Filter is still bare steel, so it will scratch the Filter when tightened.
The Oil Filter is basically out of sight, which was a little disappointing.
View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300 SUPER FOUR SP, HONDA CB1300 SUPER BOLDOL SP, YAMAHA MT03, YAMAHA MT-07, YAMAHA MT-25, KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI VERSYS-X 250, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR
I'm going to scratch the Oil Filter.
Used to replace Oil and Filter in Versys-X250.
The previous installer seemed to have installed the filter in a very Torque and it took a lot of force to remove it.
The filter was quite wedged into the filter, so its removal was a bit odd. The filter is a discarded filter, so the M10
It was extruded with Bolt.
I would like a little more rigidity in terms of the feel when installing. It becomes floppy and makes me feel uneasy when I apply force.
Wrench removal after filter replacement is difficult because it is embedded in the filter to a small extent.
The M10Bolt cannot be used because it will scratch the head of the replaced Filter (put a Rubber or something in it and push it out?).
It works fine, and the cost is great, but the price is right.
View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300 SUPER FOUR SP, HONDA CB1300 SUPER BOLDOL SP, YAMAHA MT03, YAMAHA MT-07, YAMAHA MT-25, KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI VERSYS-X 250, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR
Oil filter wrench
I bought this product because I wanted to do Oil & Filter exchange by myself. I have never used any other manufacturer's products, so I cannot compare them, but I had no particular problems and was able to purchase it with the extra points I had left over, so I am satisfied with the Large change! I recommend it! View detail
Click here for DAYTONA Filters for Ducati
Used to install Oil Filter on DucatiMULTISTRADA 1000DS.
I had not originally planned to buy it, but I bought it on short notice.
… I had separately purchased one for the DucatiOEMOil Filter, but now I need it.
Filter wrench for DAYTONA's DucatiOEMOil Filter is ↓.
https://www.webike.net/sd/525890/
However, for some reason, DAYTONA's Oil Filter for Ducati has a different filter wrench diameter from OEM…….
So, I made a Large miscalculation that OEMOil Filter can be loosened with Filter wrench for Ducati, but DAYTONA Oil Filter cannot be tightened.
This FOR HARLEY was a fit.
certainly The oil filter wrench of 44295/74700 can be used for the Cartridge Type. There was a note that said, but I missed it.
Be sure to read the warning signs.
I also think that the OEMOil Filter was changed for the difference of purchasing another Filter wrench.
Thanks to you, we now have another Filter wrenchCollection lol.
It is an excellent filter wrench and has a notch to avoid some kind of sensor that seems to be on the Harley.
Because of this, if Wrench and Filter stick together when loosening, I can tap them to remove them.
I am sure it will be useful in the Oil Filter replacement that will come next.
View detail
Ducatifor OEM
Used during Oil change for Ducati MULTISTRADA 1000DS.
Since the vehicle was purchased used and we do not know when the Oil Filter was replaced, we replaced the Oil Filter as well, just in case.
MULTISTRADA 1000DS is so called air-cooled DesmoEngine. it can be used with SS900, MONSTER S2, HYPERMOTARD 1100 and so on. it may be used with SCRAMBLER 1100 too.
I was worried about the clarity of the oil pan around the filter, but it was large and sturdy.
Perhaps a 3-claw etc. UniversalFilter wrench or Belt type cannot be used, so a Filter wrench of this type is essential.
By the way, there is one thing that is unexpected, though not with this product.
DAYTONA's Oil Filter for Ducati has a different outer diameter than the OEM Oil Filter.
In other words, this Filter wrench can remove the OEM Oil Filter, but cannot tighten the DAYTONA Oil Filter….
Since we were in a hurry, we decided to muddy the Brown by hand-tightening Full power (we tightened it properly later).
View detail
Easy to use as expected
[How is it used?
Used to loosen Oil Filter on XL1200C SPORTSTER 1200
How was your experience with it?
Rubber on the nail came off quickly, but no problem to loosen Oil Filter.
[Points to note]
Cannot be used for tightening.
View detail
Fits: HARLEY-DAVIDSON DYNA Family, HARLEY-DAVIDSON SOFTAIL Family, HARLEY-DAVIDSON TOURING Family, HARLEY-DAVIDSON SPORTSTER Family, BMW R1200GS, BMW R1250GS, BMW R1200GS Adventure, BMW R1250GS Adventure, BMW R1200RT, BMW R1250RT, BMW R1200R, BMW R1250R, BMW R1200RS, BMW R1250RS, BMW K1200S, BMW K1300S, BMW K1200R, BMW K1200R Sport, BMW K1300R, BMW K1200GT
Oil Filter made by DAYTONA can be used.
I thought the OEM Oil Filter could be removed with this product, but the size is too small to be replaced. Therefore, I think this product can be used only with the OEM Oil Filter.
I am not particular about the texture since it is a filter wrench, but it has a black surface finish, so I don't think it will stand out in a tool box. It also feels better to the touch than just bare steel.
If I can loosen and tighten the Filter properly, there is no problem. The product is perfectly fine as it fulfills its given role. The price is low, so I recommend it to those who do DIY filter replacement.
View detail
For 900SS
The DucatiOEM filter has 8 faces, so it is a just fit. The filter wrench is used only for filter replacement, so it is not durable but simply long-lasting. View detail
nice to have in toolbox
Great tool to do the final tightening of oil filters to spec. Also great for removing difficult filters and not having to resort to the screwdriver method. This is a great tool for the older . The cheap auto parts store sockets push off the filter when you insert the extension, so if you need to lean on it, it is an issue. I like this oil filter socket wrench because I can use a socket drive or a socket with it. I have another oil filter wrench that only lets me use a socket wrench drive. It protrudes down into the wrench too far and contacts the filter. This causes the wrench to want to lift up off the filter. Very frustrating. The KTC filter, however, will also allow me to use a socket , eliminating the problem of the wrench lifting off the filter. I highly recommend this filter wrench. View detail
Confidence. Reassurance. Aha, overconfidence.
[How is it used?
I feel like I've probably been using it since the YZF-R25, maybe the R6 all along.
R25:Mileage is about over 20,000km
R6:Mileage of about 69,000 km
Of the above, I think I replaced it about 3,000 km and used KN-204 about once every 2 times, and I think I used KN-204 about 5 times out of the 2, so I probably used it roughly 10 times to attach and detach it.
Was the one you received as per Image?
It comes in a Simple box and the product is as per Image.
BlueWhite shining Gold, but not Gold like tools with a Gold feel mixed in.
How was your experience with it?
A sense of security because the tools are from a well-known manufacturer.
Oil filter used for connection and disconnection
1.YAMAHA OEM5GH-13440-50:https://www.webike.net/sd/25727395/Initial installation and one time thereafter
2.KIJIMA 105-833:https://www.webike.net/sd/20386956/Unless otherwise noted, all are here.
3.Vesrah I don't remember what it is, but I remember using it once.
Not a wide vehicle in Space, but can be used by fitting tightly into the Filter
I used it with a 9.5sq Ratchet and it didn't come off.
I'm not sure if it's a little forward or a little oblique, but it's a little good.:I tried to remove the Filter while it was still set and licked it to a large. 。 It is a solid tool, but it cannot be handled carelessly because of overconfidence.
[Points to note]
As mentioned above, even a good tool will fail if handled carelessly.
How did it compare to other products?
・KN-204:https://www.webike.net/sd/19861663/Although this is not a pure tool comparison, KN-204 is easier in terms of attaching and detaching filters. In terms of price, the KN-204 is the better choice for long-term use, and it is the only product that can handle with MagnetFilter.
It is a product of a well-known manufacturer, which makes maintenance fun just by owning it. The weight of the product also gives the impression of solidity. However, it does not allow for improper use, so I feel that it will lead to careful maintenance of my car.
View detail
Fits: SUZUKI SKYWAVE650 burgmanLX, SUZUKI DL1000 V-STROM650X, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM650, SUZUKI GSX1300 HAYABUSA, SUZUKI V STROM 650, SUZUKI V STROM 1050
Can be used without problems 。 No complaints.
I do DIY Oil replacement, but I had not used this Size stuff for over 10 years and lost it, so I repurchased it.
The texture and fitting are both fine.
It's a hassle to align each Size and Size:Some people buy Free's, but I personally prefer to use the dedicated products for each Size because I feel safer.
View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300 SUPER FOUR SP, HONDA CB1300 SUPER BOLDOL SP, YAMAHA MT03, YAMAHA MT-07, YAMAHA MT-25, KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI VERSYS-X 250, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR
Essentials for Filter Replacement
I use this product when replacing filters on my CB1300SF and NC750X, and sometimes it is difficult to remove the filter and wrench, but with this product it can be quickly removed by closing it with a bolt that fits on the top. If it is troublesome, you can also use a Press Chick Hammer. However, please note that oil will fly out. View detail
Tools by Exclusive Design
It is an Exclusive Design tool, so you can use it with confidence. We are not worried about the durability of the tool since it is not a tool used frequently, but since it has not been tested, we give it a normal rating. View detail
KTC Cup Type Oil Filter Wrench
[How is it used?
Currently in use
How was your experience with it?
I bought this to replace the Oil Filter on my Z1000 and it has been working fine.
How did it compare to other products?
Compared to the unlimited-stage product that hooks onto the Oil Filter, this product can only be used on Oil Filters of the same size, but it is by far superior in terms of rigidity and reliability.
[Points to note]
To avoid purchasing the wrong size, carefully check the Oil FilterSize of your vehicle before purchasing.
Other items that would be helpful
Included Parts:Yes/No
None
Items to buy together
Torque wrench
View detail
Desorption …
The description said it was detachable, but it could only be used in the detachable direction.
I was very disappointed that it could not be tightened, but since I was able to remove the Filter, which was tightened very tightly, and the construction of the product itself is solid, I think it is not so bad if you break it down.
View detail
Fits: HARLEY-DAVIDSON DYNA Family, HARLEY-DAVIDSON SOFTAIL Family, HARLEY-DAVIDSON TOURING Family, HARLEY-DAVIDSON SPORTSTER Family, BMW R1200GS, BMW R1250GS, BMW R1200GS Adventure, BMW R1250GS Adventure, BMW R1200RT, BMW R1250RT, BMW R1200R, BMW R1250R, BMW R1200RS, BMW R1250RS, BMW K1200S, BMW K1300S, BMW K1200R, BMW K1200R Sport, BMW K1300R, BMW K1200GT
Just fit
Used in BMWOEM11 42 7 721 779Filter
Torque management is also perfect.
It feels like all the hard work we have done so far is a lie.
Recommendation
View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300 SUPER FOUR SP, HONDA CB1300 SUPER BOLDOL SP, YAMAHA MT03, YAMAHA MT-07, YAMAHA MT-25, KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI VERSYS-X 250, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR
It is useful when replacing Oil Element.
Purchased to replace Oil Element on CB1300.
It works fine
It is convenient to have it, so it is a Recommendation.
View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300 SUPER FOUR SP, HONDA CB1300 SUPER BOLDOL SP, YAMAHA MT03, YAMAHA MT-07, YAMAHA MT-25, KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI VERSYS-X 250, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR
Convenient to have
The filter can be tightened and removed with 17 sockets, and the drain bolt can also be tightened and removed with 17 sockets, eliminating the need to replace sockets and improving work efficiency. View detail
Castings, good stuff (cold! (Gobble!)
I was heartbroken by the DAYTONA product, so I hung on to KTC.
Although the company is an expensive Image, we were able to purchase the product at a reasonable price, perhaps benefiting from the Large volume production.
The DAYTONA-made steel plates were thin and expanded when Torque was applied, but the KTC-made plates were made of heavy cast metal.
It fit tightly into the OEMFilter and loosened easily.
I had a terrible prejudice against cast metal as cheap, but my view has changed 180 degrees.
Quality and Rigidity. Come to think of it, Wheel was Casting too....
View detail