Reviews
Universal but...
I was looking for a Universal Oil filter wrench and found this one.
Compared to other companies' products, we chose this one because it can accommodate a large diameter.
In fact, I used it for Oil replacement and found it very nice that the Socket is compatible with 9.5 and 12.7.
However, the part that grips the Filter is still bare steel, so it will scratch the Filter when tightened.
The Oil Filter is basically out of sight, which was a little disappointing.
View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300 SUPER FOUR SP, HONDA CB1300 SUPER BOLDOL SP, YAMAHA MT03, YAMAHA MT-07, YAMAHA MT-25, KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI VERSYS-X 250, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR
I'm going to scratch the Oil Filter.
Used to replace Oil and Filter in Versys-X250.
The previous installer seemed to have installed the filter in a very Torque and it took a lot of force to remove it.
The filter was quite wedged into the filter, so its removal was a bit odd. The filter is a discarded filter, so the M10
It was extruded with Bolt.
I would like a little more rigidity in terms of the feel when installing. It becomes floppy and makes me feel uneasy when I apply force.
Wrench removal after filter replacement is difficult because it is embedded in the filter to a small extent.
The M10Bolt cannot be used because it will scratch the head of the replaced Filter (put a Rubber or something in it and push it out?).
It works fine, and the cost is great, but the price is right.
View detail
Desorption …
The description said it was detachable, but it could only be used in the detachable direction.
I was very disappointed that it could not be tightened, but since I was able to remove the Filter, which was tightened very tightly, and the construction of the product itself is solid, I think it is not so bad if you break it down.
View detail
In the Filter of Rokdabo.
[How is it used?
Used to replace Oil Filter in late cbr600rr pc40
Was the one you received as per Image?
As shown in the Image. It worked normally.
How was your experience with it?
The position of the Filter on the Rokudabo was difficult to work with, but it did its job well as a Filter wrench.
[Points to note]
The direction of rotation can only be in one line.
View detail
Good accuracy
These tools may not be accurate, or they may not come off in anticipation, or they may not be able to come off.
Licking can cause scratches.
This product is so precise, it fits perfectly.
Loosening and tightening can be done very Smoothly.
It is a reliable Brand and will be used for a long time.
View detail
New ModelGSX1300R HAYABUSAFull Exhaust System exchange was not able to use Exhaust pipe hindrance…
New ModelGSX1300R HAYABUSAFull Exhaust System replacement, I bought this product because I couldn't fit the CupType tool to remove and install the Oil Filter, but the Exhaust pipe was in the way and it didn't work. However, the quality of this product itself is excellent. View detail
Fits: HARLEY-DAVIDSON DYNA Family, HARLEY-DAVIDSON SOFTAIL Family, HARLEY-DAVIDSON TOURING Family, HARLEY-DAVIDSON SPORTSTER Family, BMW R1200GS, BMW R1250GS, BMW R1200GS Adventure, BMW R1250GS Adventure, BMW R1200RT, BMW R1250RT, BMW R1200R, BMW R1250R, BMW R1200RS, BMW R1250RS, BMW K1200S, BMW K1300S, BMW K1200R, BMW K1200R Sport, BMW K1300R, BMW K1200GT
Buy to manage Torque
I bought it to manage Torque when I change Oil Element.
I had an oil leak when I installed it by hand, so torque management is a must.
View detail
Fits: SUZUKI SKYWAVE650 burgmanLX, SUZUKI DL1000 V-STROM650X, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM650, SUZUKI GSX1300 HAYABUSA, SUZUKI V STROM 650, SUZUKI V STROM 1050
Acceptable considering the price.
[How is it used?
This is used to replace the Oil Filter in conjunction with the Oil change.
This product alone cannot replace the Oil Filter, so you will need a Wrench that fits the Size separately.
How was your experience with it?
As for the quality, there is a slight rattle on the inside, or something like that.
There was a little gap when I combined this product with the cartridge of the Oil Filter, so I combined it tightly and deeply, but if you combine it too deeply, it will be difficult to remove this product from the removed Oil Filter.
It is not enough to interfere with the oil filter connection and disconnection work, but it may require a little attention.
In case you can't get it off, there's a hole in it for you to screw the Bolt in and push it out.
However, considering the price, I think it's acceptable.
If you are clumsy like me, please be careful when you work on it because if you put it together too shallowly, you may nuzzle it, or you may hit your finger when you put too much force and scuff it.
View detail
Fits: SUZUKI SKYWAVE650 burgmanLX, SUZUKI DL1000 V-STROM650X, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM650, SUZUKI GSX1300 HAYABUSA, SUZUKI V STROM 650, SUZUKI V STROM 1050
Hard to compare products
I bought Wrench made by DAYTONA because I lost Wrench which I had used until now.
It is a product that is difficult to compare with other companies, but naturally there is no complaint about Oil Filter turning.
View detail
Fits: HARLEY-DAVIDSON Harley-Davidson Other, HARLEY-DAVIDSON Harley-Davidson Other
Oil filter wrench.
I bought it because I changed my motorcycle. for HARLEY is the sensor escape? (The notch in the picture) was important, but I couldn't see any reason why it would be particularly necessary for my Motorcycle in Milwaukee Eight. I don't know why it would be necessary on my Milwaukee Eight. Other than that, it's no different than a regular Filter wrench, nothing special.
My complaint, or hope, is that the Filter wrench in general has a tool manufacturer that can somehow prevent the removed Filter from sticking too strongly to the wrench.
View detail
I bought a 998.
I bought it. The ease of use is the same as the Filter wrench for domestic use that I have had for some time.
If you're going to have one for docas, this would be it. I don't know of any others.
View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300 SUPER FOUR SP, HONDA CB1300 SUPER BOLDOL SP, YAMAHA MT03, YAMAHA MT-07, YAMAHA MT-25, KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI VERSYS-X 250, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR
I bought it when I was a beginner.
I bought these when I first changed the oil on my motorcycle.
Well, it's not uncomfortable to use.
That may be the best part.
View detail
Fits: SUZUKI SKYWAVE650 burgmanLX, SUZUKI DL1000 V-STROM650X, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM650, SUZUKI GSX1300 HAYABUSA, SUZUKI V STROM 650, SUZUKI V STROM 1050
perfectly normal
A little more machining accuracy would be nice, but I guess that's about it.
When you use it in its bare state, you need a little hang to use it due to machining accuracy issues.
I think that you can use it without a problem if you stick Aluminum Tape etc. inside Cup, adjust the gap and use it if you are worried about it.
View detail
It's convenient to use with Universal.
You can use it for most size oil filters because it bites into the well to remove the engine oil filter. If you have a hard time loosening the filter, we recommend you to use the filter wrench to loosen it. View detail
I wouldn't recommend it
Since the Zipper only works in the direction of loosening, it expands when it is tightened, the Cup-style Filter wrench is much easier to use
Also, the Zipper slipped when I loosened it and I had to remove it while holding it down by hand
View detail
It does not work with the MT-25's OEMFilter
Model number; 5GH-13440-61 does not work with the Filter
The Wrench endorsement states Not all models are available It is
It's not a lie and it's not a choice
I didn't do enough research
The diameter used appears to fit with φ55mm
But the engagement is not right
I used it and it transformed the Filter beautifully
I'm glad I noticed the hole before it opened up
So, you can't recommend it
You should do your research before you buy a tool
View detail
Fits: HARLEY-DAVIDSON DYNA Family, HARLEY-DAVIDSON SOFTAIL Family, HARLEY-DAVIDSON TOURING Family, HARLEY-DAVIDSON SPORTSTER Family, BMW R1200GS, BMW R1250GS, BMW R1200GS Adventure, BMW R1250GS Adventure, BMW R1200RT, BMW R1250RT, BMW R1200R, BMW R1250R, BMW R1200RS, BMW R1250RS, BMW K1200S, BMW K1300S, BMW K1200R, BMW K1200R Sport, BMW K1300R, BMW K1200GT
It can be used normally
It licks pretty well, so be careful if you plan to use it
I dealt with it by putting a cloth tape on the oil filter, so I managed to replace it
I don't have to wait until the next Filter exchange, but I'll just call it a neutral rating for now
View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300 SUPER FOUR SP, HONDA CB1300 SUPER BOLDOL SP, YAMAHA MT03, YAMAHA MT-07, YAMAHA MT-25, KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI VERSYS-X 250, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR
It can be used for both detachment and attachment
I bought it because I needed it for a filter replacement job
There are other tools that can be used to remove it, but I like to be able to tighten it up with the prescribed torque when it is installed It is
This filter was an OEM product, but we were able to install and remove it with no problems
View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300 SUPER FOUR SP, HONDA CB1300 SUPER BOLDOL SP, YAMAHA MT03, YAMAHA MT-07, YAMAHA MT-25, KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI VERSYS-X 250, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR
This is before it was used, so it looks good to me
Thank you for your quick response in the middle of the holidays
I haven't used it yet, so it's just a look
The construction is good because it is clean
I'll use and evaluate the rest
View detail
AVSA-067 Yamaha original manufacturer's product watch 5DM-13440-00 is suited. Although the Oil-filter Cartridge of TMAX500 does not have an obstacle on the outskirts, either and trouble is not in work by the Wrench of a Belt type or a Universal t
AVSA-067 Yamaha original manufacturer's product watch 5DM-13440-00 is suited.
Although the Oil-filter Cartridge of
TMAX500 does not have an obstacle on the outskirts, either and trouble is not in work by the Wrench of a Belt type or a Universal type, either, for removing,
Since Torque management can be carried out exactly [ until it stops by hand ] at the time of attachment, a Cup type Wrench is safe to a Torque wrench.
Since it can drive by 3 / 8 angle Drive, a Ratchet handle on hand and Adapters various kinds can be used, and it is convenient.
View detail