Reviews
Size notation is easy to read.
I purchased this for my in-vehicle tools and I really like that Proxxon tools are easy to read with Laser engraved size markings. View detail
The details are still this
Recently, Gear wrench has become thinner and can be used for the Large part, but it can not be used for the smallest size. (8,10mm) I bought more of the following.
Plating with a non-slip semi-nashiji surface, thin for easy gripping, and I-section and wide sides for a grip that does not hurt the hand. The bolt nut is firmly gripped with a sense of security. The rigid feel with little rattling makes it easy to feel the turning sensation, and there is no sign of tampering when used in normal operation.
This Wrench is the 21st Century VERSIONTool." The old product, before it was released as the "M" series, was thicker and protruded at the center, but this one is thinner, yet more rigid. This one is thinner but more rigid. Above all, there is no waste part at all, and it looks good.
There may be differences in usability, durability, and reliability from the high-end products, but we feel that this is an area where the average person does not need any more. No worries about breakage if you use it normally. There are no problems with ease of use at all.
I felt 8mm was a little short. (probably due to the Torque used) The length from 10mm to 10mm is long enough for a man with a large hand to turn.
View detail
Standard tools with outstanding reliability
Recently, Gear wrench has become thinner and can accommodate a Large portion, but for places where it still won't fit, the Smallest size is available. (8,10mm) I bought more of the following.
The thin, non-slip, semi-nashi-lined plating is easy to grip, and the I-section grip handles prevent palm pain. The grip is thin and easy to grip with semi-pearskin plating to prevent slipping. The rigidity of the grip is very low, so it is easy to feel how it is turned, and there is no sign of tampering when used normally.
There may be differences in usability, durability, and reliability from the high-end products, but we feel that this is an area where the average person does not need any more.
No worries about breakage as long as you use it normally. No problem at all with ease of use. However, I would feel more comfortable if the 8mm was just a little longer than this.
View detail
Not in Tools Set!
Ducati 900SS needs 11mm for brake fluid replacement with brembo caliper.
When I put Glasses on it to replace it, I found it was too loose with 12mm, and it didn't bite with 10mm... I didn't think it would work with 11mm...?
I didn't have 11mm in my tool box, so I hurriedly snapped up SIGNET's Combination wrench 11mm.
I received the product and immediately replaced the fluid, but it was an exact 11mm. 11mm may not be used very often, but you need a tool.
View detail
Combination without the Zaghari, I'd like to have one!
Many Wrench are zagri
The cut is made at an angle for easy access to the bolt.
This one is easier to work with because it's easier to plug into Bolt.
Ease of use is up!
BUT!!! If it's a low-head Bolt or Nut, the tool is hanging on!
There are so few places!
When I hang the tool and the rattle and uneasiness is Large!
Anyone who works on their own can relate, right?
And since these deen Glasses without the counterbores do not have a counterbore on the front or the back, they are not as large as the deen Glasses without the counterbores.
Did you put it in? Did you put it in? I'm pretty sure it's hung on Bolt and Nut to that point!
I don't feel uneasy when I hang Torque!
I wonder if you understand?
I'm using deen's Combination with the security of not licking and TradeOff, which is a little harder to insert, but I'm still using deen's Combination - I think.
There's a wide variety of Motorcycle Bolts and Screws.
Try to have some tools available ((laughs)).
You will be addicted to the tool swamp!
View detail
Affordable and easy-to-use tool.
I honestly did not expect the quality of the product because of the reasonable price, but it is a Ditona Brand.
This tool is very easy to use. I've used it hard, but the nut doesn't lick and it's easy to use.
The tooling is moderately textured and beautifully finished.RECOMMENDATION!!!
View detail
bulky
No need to prepare Glasses and Spanner for every little maintenance. View detail
Feeling of security
Up workability because of a different sense of security when working View detail
Feeling of security
The grip and the sense of security when working are different. View detail
I feel it's better than KTC.
This is a combination wrench from TONE, the second Japanese standard after KTC.
You can often find them at home centers and other places, so you may have many opportunities to touch the actual products.
There is a tendency in the world to think ” KTC” first of all, but at least in Sun Machine Level, I don't think you can find any part of TONE's tools that is functionally inferior to KTC's.
The only thing I would say is Brand power.
But I think that's simply because ”TONE is a little cheaper, ” and that's because it's an original Image.
In actual use and comparison, I personally did not find anything inferior to KTC.
I don't feel any problems with the sense of precision and rigidity.
Rather, I felt that TONE's surface finish was characteristically high quality and better, somewhere between nashiji and mirror surface, or smooth nashiji.
This is a good product with this quality at a good price and even better availability.
Furthermore, it is better than mindlessly buying KTC, which is more "twu-like".
I would have used KTC's Combination wrench without thinking about it at first, but if I could go back to those days, I would have used TONE.
View detail
Is good
The tool is easy to use with good quality for the price.
One Side is Spanner and the other side is Ratchet's Glasses, plus it swivels for ease of use.
The GEAR of the Ratchet is also very fine, so it is useful for Swinging on in tight spaces. It is a highly functional and high-end tool for the price.
View detail
"cool
It is not a bad make, so it is safe to use.
The grip feels comfortable in the hand and is thin, making it easy to use in tight spaces.
The finish is very good and clean looking.
View detail
I think it's a good product.
High quality and easy to use.
It is easy to use because of its careful finishing and good workmanship.
It looks cool and I like using it.
View detail
Easy to use
It is high quality and easy to use.
It feels very good to hold and is thin, so it is easy to use.
The finish is good and I like the look and feel of the product.
View detail
Easy to use
The strong Ratchet will not break even when tightened with force.
It is easy to use for Motorcycle Maintenance because the Ratchet works at a small angle even in tight spaces.
You can rest assured that the quality and performance of KTC are unmistakable.
View detail
Convenient to have
Very convenient with access to Bolt in a tight spot.
It is useful in places where hands can fit but not long tools.
Combination wrench so it can be used in different ways.
View detail
This Quantity:Set is all you need.
If you are looking for a level of customization and maintenance that you can perform, the most common size used in motorcycles is Quantity.:It's a Set.
I feel like this is all I need.
The texture of the plating is good and it fills you with a sense of ownership.
View detail
Great wrench set
This is a great wrench set that includes all the sizes you will need to work on your Japanese motorcycle. I wish it also would have included a 19mm but maybe it can also be purchased individually? Kowa is one of my favorite Japanese tool manufacture and I will always look to see if they make a particular tool I'm looking for before considering others. These wrenches feel great in your hand and fit fasteners very precisely. It would be a great little set to carry with you on your bike since most new motorcycles no longer include tool kits. I'm also very happy with webikes service and glad they will ship to the USA at reasonable shipping cost and they always package the products very well. View detail
Just buy it and you're good to go75
If you buy it for the time being, it is the first of OKBrand, KTC's Combination wrench.
Quantity:I bought it at Set and have been using it for years.
General tools such as combination wrenches can be found inexpensively at home centers, but you can still get a good ”feel” for a good price.
High quality
It is not overly beautiful like the company's nepr◯s.
The corner is standing up and it is good to hang with Bolt/Nut.
The glasses are slightly angled.
For better or worse, the Glasses side is slightly angled as you can see in the picture.
It's often helpful to be physically present.
KTC's LongGlasses does not have an angle, so I think it is better to use it with that one.
Easy to manage Torque by length according to Size.
Each size has a different length, and if you hold the end and close it tightly, you'll get a good Torque. (Appropriate) 。
Also, the rigidity is perfect and it doesn't get bent out of shape, so it's comfortable to use.
Fat durability
I've been disappointed with the KTC because the socket rusted unexpectedly quickly, but the combination wrench has not had that problem so far.
Wall-mounted storage with emphasis on appearance (Semi-outdoor) However, I can use it without any rusting and of course without any damage of deformation etc.
In general, I can recommend this product as a first step tool.
I mean, if it's just ”let's do a little ” I guess this is Overspecifications.
However, the combination wrench is a good option for those who are unwilling to buy a spanner that they rarely use but have to have, both in terms of wallet and storage space.:If you think that you only need to have 1 Set, it would be a good idea to try your hand at a ”slightly better” one like this product.
View detail
21mm is
I bought this for the Oil FilterCoupler in my car.
It was too narrow to turn the Ratchet, so now it's easier to work with!
View detail