Reviews
I don't use Size very often.
I rarely have a chance to use a 27mm Combination wrench, but I bought a SIGNET wrench with a good balance of price and quality, thinking it would be used occasionally for suppressing Kashimaru-kun's Holder and for Axle Shaft of Big bike.
It is indeed a powerful Size.
View detail
Appropriate tools are easy to use
I needed a 15mm Wrench for toe adjustment on my car and always tried my best with a regular length Wrench. I bought a LongWrench because it became sticky and hard to turn if I didn't touch it for a while, and I was able to adjust it easily. I tend to be in an impossible position when adjusting it, so it can be dangerous to turn it with too much effort. I am glad I purchased it. View detail
Easy-to-use tools
Convenient for tight spaces where a Socket wrench will not fit.
I recommend it because the quality is not bad for the low price.
View detail
for professionals
Although rarely seen in home centers, the Combination wrench is a tool that is highly sought after by tool enthusiasts.
It is often compared to Stahlwille, which is also Made In GERMANY with a pear finish, but the design concept is completely different.
First, HAZET's Combination wrench is roughly made.
The inner surface of the spanner still has some machining marks, and there are also some areas where the BALI and plating are not well done.
Stahlwille showed beauty in the finish in a pear-shaped way, but HAZET (Put it well.) It is dressed in a fashion that is both solid and sturdy.
HAZET's Nashiji is unique in that its unevenness is larger than that of other companies' Nashiji and it is more slippery than other companies' Nashiji.
Also, the difference between the Largeest and the Stahlwille is the rigidity.
Or rather, this point is characteristic of Stahlwille, which has a distinctly squishy feel, even within the prescribed Torque range.
This is where tastes differ, and I gave up Stahlwille because I could not accept the stiffness.
On the other hand, HAZET's design is thin and compact, but it does not have a special firmer feel, and even those who are accustomed to using general tools from KTC and other manufacturers are unlikely to feel any discomfort.
In general, it is a well-made, function-oriented tool.
However, I think you will be betrayed if you expect it to look beautiful, so you will be happier if you ask for an S or N that costs twice as much. or Stahlwille if you are particular about the pear color.
If you are not that particular about combination wrench, TONE or KTC are inexpensive and readily available.
This product is for those who are not satisfied with TONE or KTC, but do not need a beautiful mirror finish and want to choose a product that is functionally oriented.
View detail
Unusual thin Combination wrench
This is a thin Combination wrench from KTC, the Japanese Standard for tools.
As the name suggests, it is MAJORItems for bicyclists, and Amaz*n or something like that, there are a lot of reviews that seem to be cyclist-list.
Basically, it is a Spanner that can access areas that are too thick for normal Spanner to access.
It was 10mm wide on two sides and the thickness of the Spanner section was 3mm.
Generally, this type of thin-walled item is simply lineuped as a Spanner, but this product is a Combination wrench.
Note that the Glasses side is not thin-lipped.
For this reason, I think it is not impossible to use it as an alternative to the normal Combination wrench if you pay attention to the concerns when using it on high Torque areas.
Also, many Thin Open Wrenches have a rough finish due to the base punched out of the plate gold, but this product, as one would expect from KTC, has a normal finish on the spanner section. It is not particularly excellent, but it is not bad at all.
The only thing that I personally think is not good enough, although it is just a preference, is the design of the cherry blossoms.
It doesn't make any functional sense. (It's more likely that dirt will accumulate in the hollows.) I was not attracted to Design.
I want my tools to have functional beauty. It is completely my personal taste.
It is a rare combination wrench as a Thin Open Wrench, so it is the best candidate if you are particular about Glasses.
It is also a product that can be recommended in general because it is definitely a thing.
View detail
Convenient for Oil replacement
It is helpful in tight places such as Oil change.
The feed angle is small, and the machine is well made and highly accurate, so it can be tightened tightly.
Compact and thin, it can be used for the same purposes as ordinary Glasses.
View detail
Tiny and cute.
I bought it thinking I would eventually use it.
Good to use, easy to turn with moderate resistance.
View detail
The protrusion can be used
The protrusion is usable, and the GEAR is just the right lightness. View detail
GEAR is delicate
The GEAR mess has a delicate sound.
They work well in tight spaces.
I use it a lot in tight areas of Stroke.
View detail
Light thin strong!
Good product
It is a light, thin, easy to apply force handle, a tool that is rarely used but is a necessity.
View detail
KTC after all!
Our tools are KTC. We have other tools such as Tone and SK, but KTC is the one that gives us a sense of security.
If you buy more than a certain amount of tools, you will have less Risk, and as a result, your expenses may decrease.
View detail
![[AEBS] Hexagon Wrench Set (Inch)](https://img.webike-cdn.net/catalogue/19270/06291933_51ceb80116802_TS.jpg)
for HARLEY.
If you don't have an Inch size Hexagonal Wrench, it's not easy to maintain your Harley. [Contents] It's also very cosy. View detail
Effective in tight spaces
You can fit your hand but not a long tool. It is a combination wrench of palm size that can be used effectively in such a narrow place. Even in places where the angle is not effective, the combination of Spanner and Glasses works effectively. View detail
Bottled Beer + FashionBottle Opener = Instagrammable
Bottled Beer + FashionBottle Opener = Instagrammable
For those who love to drink, it's also a Recommendation and 10mmGlasses CombinationWrench type Bottle Opener
Good points? Good point?
I don't have to explain it anymore It's simply cool and insta-worthy
CombinationWrench Bottle Opener for your favorite bottled beer It's super fashionable to open it, and there's nothing better than sitting in the garage watching your car and drinking a beer Yes
This is a genuine tool made by the company, with a blue surface finish and a plating coating It's a real Coating that has been adopted by There's a sense of jokeGoods that the Manufacturer has really worked on The finish is very ticklish for Gadget lovers I love these products Large
Good point? Tool Manufacturer, it's easy to use
As expected from a tool manufacturer, the Bottle Opener has a long handle and is easy to work with The part also captures the plug tightly, so it's usually easy to use, even though it's a Fangッズ (Not, the Bottle Opener) part does a good job
Moreover, the other side of the CombinationWrench is a normal 10mmWrench You can use it It's also circular in shape because it's called Glasses, so you can use it as a ladle or flyback hook Can be hung and stored This CombinationWrench type Bottle next to the ladle/flyback The sight of Opener is a bit of a ShoeLu
View detail
High Cost performance
I bought a frequently used 8mm, 10mm, 12mm Combination wrench on SIGNET. I feel delicious compared to the KTC that I used mainly until now but I think that Plating is also beautiful and worth more than the price.
I hope it has durability to be used for 10 or 20 years like KTC, but I still do not know the place there.
View detail
Borrow from a friend
Circuit borrowed from a friend when driving, KTCCombination wrench.
I only have cheap cloths, but KESSEKI KTC, that texture when I have it makes a different atmosphere.
Even if you actually use it, Fit it firmly and it will work with Firmly as if it were not bending.
I felt there was only a reasonable amount of gold.
View detail
It is a Cost performance after all! Moreover, a feeling of a Hold is also a perfect category. The Plating is also moderately hard considering a price. Although it was , also when it was ... and 17 mm, it wrote in, but in order to make
It is a Cost performance after all!
Moreover, a feeling of a Hold is also a perfect category.
The
Plating is also moderately hard considering a price.
Although it was
, also when it was ... and 17 mm, it wrote in, but in order to make the whole
round, when the edge is thin and it is operated by high torque, by the
woman's hand, it may be painful.
It is a difference of an about if other tools are known to the last.
It may be the big difference to
, however a woman and a person with a weak hand.
If had by the hand too stained with oil after
, the texture of a vine vine and the edge rounded thinly will carry out
evil, and it will slide.
Also finely, the another one also becomes only by wiping lightly so that may be written on the other hand.
View detail
A tool is regarded as Brando who can trust it too, and is using KTC. A cheap tool does not have quite satisfactory accuracy at it, and licks and carries out the stripes of the Bolt. Accuracy can use the point KTC, feeling easy well. It is easy-to-use a
A tool is regarded as Brando who can trust it too, and is using KTC.
A cheap tool does not have quite satisfactory accuracy at it, and licks and carries out the stripes of the Bolt.
Accuracy can use the point KTC, feeling easy well.
It is easy-to-use at a Power Fit of 12 angles.
Certainly [ the direction of a Set thinks that there is user-friendliness and are using the thing of the Set rather than he buys it with the
Rose, but if had, will be helpful in case of emergency, and ].
The Tray is not used.
View detail
Although the Glasses wrench and the Spanner own the thing of some Patterns, I think that it is found useful when [ in a narrow place ] using it, and that this Wrench is straight, and no Wrenches can put power so much on the Torque of a Bolt since it is sh
Although the Glasses wrench and the Spanner own the thing of some Patterns, I think that it is found useful when [ in a narrow place ] using it, and that this Wrench is straight, and no Wrenches can put power so much on the Torque of a Bolt since it is short although owned from 8 mm to 17 mm since the angle attaches a few to the Wrench and a table and a flesh side can be used. View detail