Reviews
It's inexpensive, so it's a good idea to have it as an insurance policy.
I ended up relying on Extractor, so I couldn't use it on the rusty, soggy Screw.
However, it would be good to take it as a preliminary bad idea before drilling holes with Drill.
It is possible to buy it as insurance because of its low price.
View detail
We can't expect too much.
I was attracted by the phrase, "You can turn a tapped screw! I was attracted to this product by the phrase, "You can turn a screw that has been tampered with!
However, in the end, it depends on the strength and condition of the Screw side, so it is not able to stand up to a soggy Screw.
It's a pain to use Extractor out of the blue, but it's good to have it as an insurance policy for positions and types of Screws where Neji-saurus-like things are not available.
View detail
For Socket
The Driver for the Socket wrench for in-vehicle tools broke, so I bought this to use as a replacement.
The grip and ease of turning are fine, but it is a little larger than I had imagined. I wanted something a little more compact, but it looks sturdy, so I thought this would be fine for use.
View detail
The smallest and lightest Merit is the Large Merit.
I bought this to play with the carburetor part on the go. To be honest, it is cheaply made and hard to turn.
The small size and light weight make it easy to carry around.
If possible, I would have liked to have a part to attach a Key Holder.
View detail
It is not necessary to have it, but it is convenient to have it.
At this price, you won't feel like you're missing out if you have one.
The thicker grips make it easy to hold and apply force, and it is definitely easier to turn than using a 500-yen coin.
View detail
Compact
I was looking for a compact and small one to use in a small space, and this one looked good, so I bought it.
The size is a little larger than I expected, but the turning part is nice and usable.
View detail
Slotted screwdriver。
The tip is sharpened and used as a tapping tool. View detail
It depends on the location.
The size is delicate, so the place where it is used is limited. View detail
Subtle Size.
It's not the easiest Size to use, but it depends on where you are. View detail
You don't have to, but it's definitely useful to have.
Such a delicate tool Coin driver.
Well, it's a lot better than twisting a dime and bending it.
It's not priced so low that you'll hesitate to buy it, but it's not so cheap that it won't add to your shipping costs either.
View detail
Convenient when you want to tighten and remove lightly
[How is it used?
I bought it mainly to dampen the Suspension, along with the other Size, and wow!
I didn't check the Size carefully, so the Size didn't match.
How was your experience with it?
I didn't get to use it in the area I originally planned, but I am using it for simple exterior Bolt loosening and tightening.
If it is a screw of this size, I thought that Torque of the range that can be used with this is enough.
[Points to note]
It's a ball shape, so if you apply force with a high Torque, the head will probably come off. Yes. It will come off.
How did it compare to other products?
This time SizeI bought the wrong one and found a use for it in another place as a result, so I don't think it's particularly necessary if you have a regular hexagon.
View detail
It's huge.
I bought it because I thought it would be useful.
Although we don't actually have many scenes to use
It can be used as a hole drilling tool by attaching a hundred-yen drill blade.
Because the body is large and the grip is thick, it can be opened straight with force.
It's not the original use, but it's useful depending on how you use it.
View detail
Compact
It is thin and effective for use in confined or unangled spaces, and there are many different types of Large Caps on the tip of the Driver to choose from for easy replacement. View detail
For now, it's an OK tool.
I think it's a tool that you can buy as a missing but not often used tool.
I don't have any problems with it, but there's nothing satisfying about it.
I guess the only thing I can evaluate is Cost performance.
I may repurchase this Manufacturer tool if I have a similar situation.
View detail
Tool standard value
When loosening the lock nut for initial adjustment
I had to repurchase it because I was beating it with a slotted screwdriver and the tip was chipped off.
Originally KTC's Quantity:I bought it as a set and it's not too bad for the price, in terms of accuracy, construction and use.
I've been using it without any complaints.
View detail
It is a shame driver
Driver uses WERA, PB, Vessel, TONE, SIGNET and so on.
I purchased and used TPMD 18 of this Driver 8 book KTC and used it as a comment.
- Because it is rectangular, power comes in, but it is unsuitable for continuous turning and heavy.
- The coloring of + and - is easy to see, Design is also good.
- Is it due to chemical adhesion? "KTC" Label got peeled off (Crying).
** Label should be printed or engraved (Secondary disaster prevention).
I tried using a high Driver, but I say it is ownership desire or quit with self-satisfaction.
After all, I repurchased KTP's LTPMD 126 that I used before.
For me this is the most inexpensive and Recommendation.
Although the number is different, it is 2000 yen cheap even for the same KTC!
View detail
Automatic for Vehicle wanted it to be shorter (number 3)
Since the Bar End of our Motorcycle is tightened with Screw lock + strong Torque, teeth do not stand in the usual Driver, but you can remove it with this Driver.
Also, so there is no place to use No. 3 so much (number 3) If you have one item - - - I thought, please do not do too long for automatic for Vehicle.
Recent automobiles are made Small as they make it Small, so there is Screw in the back place, even if there are places where parts can be seen - - - Depending on Manufacturer, there are things that are not easy to maintain.
In our Motorcycle, there may not be necessary for Motorcycle as there are only places used only for Screw of Cover of Air Filter, Screw of Battery terminal, Bar End.
However, the impression of Japan Manufacturer was received as truly as making the product itself.
View detail
Ratchet driver
I purchased it because I can trust in JAPAN.
Basically I use it at work.
As everyone seems to have a heavy feeling
I feel heavy with having only Driver,
I do not feel much weight when using it.
As a result, it is regrettable that Bit of other Manufacturer can not be used.
View detail
It is an Offset ratchet driver of ANEX 425, and 1/4HEX which has established reputation in a Driver.Super-short bits (-6 mm-Ph2) with a low back of 19 mm are attached to a Package.This product is a Straight handle although the Lineup also of the Bent type
It is an Offset ratchet driver of ANEX 425, and 1/4HEX which has established reputation in a Driver.Super-short bits (-6 mm-Ph2) with a low back of 19 mm are attached to a Package.This product is a Straight handle although the Lineup also of the Bent type at which the Handle turned is carried out.Although a Stubby driver is used in a part with few crevices containing a tool to the axial direction of the Screw, it becomes the turn of an Offset driver of this sort at the place into which it still does not go.If attached super-short bits are used, 21-mm thinness will be realized from a Head to a Bit tip.Bit maintenance is a Magnet and can use the Bit of 1/4HEX broadly besides attached super-short bits.
Though regrettable, a feeling of operation of a Ratchet is not so good, and an idling Torque is not the lighter one, either, but is there using this only in the place containing never? --
View detail
Although it was going to loosen the hexagon head of 4 mm, this did not loosen for the Driver. It was useless in their being T type or a Ratchet VOX. I think that it seems to be natural.
Although it was going to loosen the hexagon head of 4 mm, this did not loosen for the Driver.
It was useless in their being
T type or a Ratchet VOX.
I think that it seems to be natural.
View detail