Reviews
watchman
I always buy this product.
It's expensive, but the tip is sturdy and fits the screw.
Very easy to use
We do have some thicker Grip products.
The force is easily applied when tightening, which can lead to overtorque.
I like this one just as much as the other one, which can be tightened just fine.
Grip has a distinctive smell, so tastes vary.
View detail
One and only
The world's standard slotted screwdriver.
Ordinary slotted screwdrivers have a tapered tip for ease of insertion, but PB's patented parallel surface finish on the tip of the tool allows it to fit perfectly with Minus screws for machines, many of which have parallel grooves.
Grip is like a rough rubber. I think it is not slippery, but there is not a sense of luxury at all.
It was just unpopular with the old Plug lip. "Ewoks." You don't have to worry about your toolbox getting smelly.
View detail
I bought it to adjust my glasses. I love it!
I bought it to tighten up my little Screw from Glasses.
I love it, I've never bought anything else from PB products.
This is the only way I can tell, but the common Chinese DriverKit looseness is not here, as it should be.
View detail
Is it good?
Because it is PB, the quality is high, but it is a little expensive. When you want to hang the torque, it is not suitable for you. Of course, it is a good driver, but when I think about the cost performance, I think that the Mega-Dora of Vessel is superior. View detail
Okay.
The famous PB slotted screwdriver has a parallel tip It has steps like this. It is easy to use, but it is not easy to damage it because it has no strength. If you want to damage it, you should prepare the driver for it. Time was twisted and the tip was broken. (Sad.) View detail
PB is good
It doesn't have that distinctive PB smell!
If you use a lot of blades with one Grip, you can get a lot of blades
It can be changed into various drivers
View detail
Fertilizer tool box
【What made you decide the purchase?】
- Because I possessed precision Phillips Screwdriver made by PB, I will buy Slotted screwdriver as well. Size is the same as the Phillips Screwdriver Smallest No. 00
【How was it actually used?】
- Ease of use like the Phillips Screwdriver, the Grip end rotates to Smooth without resistance, so I could turn Screw securely. However, compared with Phillips Screwdriver, I am concerned that the total length is 10 mm shorter
[Is there anything I was disappointed about?]
- This is also the same as Phillips Screwdriver, but the Gate trace processing that was done when casting the resin of the Grip part is not good finish. Sharpen the convex portion with Design knife
【Hope for Manufacturer - Please let me know if you have any improvement points]
- It is easy to understand if the color of Grip is different by Size
【Have you compared items?】
- ANEX Super fitPrecision Driver
[Others]
- As the usual frequency of use is Precision Driver, even if you have a hobby tool that does not have much activity. The fertility of the tool box has increased ( - ∀ - `)
View detail
Ease of use as expected.
Purchased for Carburetor OH. Satisfied with ease of use as expected.
There is only high, it is also convincing that it is expensive.
However, this Driver's Blade is a Taper type, not a Type with a famous step.
Type with a step is "Swiss grip" It is Type.
View detail
I increased the type because I bought it before.
PB 206S - 3 Ball Point Hexagonal Bar Screwdriver I bought earlier was easy to use
I bought 206S-4 and 206S-5.
View detail
I increased the type because I bought it before.
PB 206S - 3 Ball Point Hexagonal Bar Screwdriver I bought earlier was easy to use
I bought 206S-4 and 206S-5.
View detail
Cross Driver
Since I was doing Events at a neighborhood shop, I went to see it, I just bought it.
Events contents are Grip part and Blade part are six colors (Red - Blue - Yellow color - Black - Green - Purple), press-fitted on the spot, I also purchased two unintentionally.
View detail
Easy to use
I bought it for disassembly assembly of Carburetor.
I bought to shorten the maintenance time as it is a Ball point. After all it is safe for PB products. I would like a Lineup of the Ball point Hexagonal Bar Driver which is a little longer if possible.
View detail
It's fine.
I always use KTC at home, MAC at shop, but I wanted another and bought it.
I was bought for the first time PB but it is quite nice.
Screw will loosen as you cling to it.
It is also nice to have a hexagon at the base.
Although it is good to stick to Manufacturer, since I think that each Manufacturer specialty field is there, I have recently bought and tried various other Manufacturer specializing in specialty fields.
View detail
Exactly to Jet
(1) I am using it for Carburetor's low Jet exchange.
(2) I can join Exetly in the groove of Jet, I can turn Jet without play, I will not hurt Jet.
(3) Part of the Black at the tip will be peeled relatively quickly. I use it only a few times a year, but I got a little peeled off in about 3 years.
(4) Grip smells a little when it is wet or when it gets wet with rain.
View detail
For carburetor
In order to disassemble and clean the carburetor, I purchased it because I needed a slotted screwdriver with the same size as the axis.
I looked for various things, but surprisingly I did not sell a slotted screwdriver with the same size as the axis.
As a result of looking at Net, I decided to buy a PB driver famous for Driver so that I can use it anyway if I buy anything.
The color of the part of Grip is beautiful and I personally like it, but as you saw on Net, it is quite dangerous. Will it disappear after a while? It is unknown whether it is like this forever.
Although durability is still unknown, well, if an amateur uses it to tamper the carburetor it will probably be the last one.
View detail
-Driver's male
【What made you decide the purchase?】 Speaking of the male of -Driver PB!
【How was it actually used?】 I bought it for 2 types of electric worker examinations. (eh?) It is easy to bend the nail of OutletPlate when the tip is parallel.
[Is there anything I was disappointed about?] I have not been beating it yet, will not it be lost if I hit it?
【Hope for Manufacturer - Please tell me if you have any improvements】 Grip's unique Smell ,,,
【Have you compared items?】 About Nepros?
View detail
Since No. 2 of a Plus is a product certainly used for a Motorcycle Maintenance, use of a cheap Driver is strict prohibition! Too, unlike a cheap article, as a Screw sticks fast, it can turn.Since a stamp for which the Grip end also understands a
Since No. 2 of a Plus is a product certainly used for a Motorcycle Maintenance, use of a cheap Driver is strict prohibition!
Too, unlike a cheap article, as a Screw sticks fast, it can turn.Since a stamp for which the
Grip end also understands a kind at a glance is carried out, the feature is intelligible.
View detail
The Quality of PB is the highest with a Reasonable comparatively.Since the Shaft is thicker than usual 1 mm, a rigid feeling when a Torque is imposed is very good, and the ease of grasping of a Grip, the die length of a just right Shaft, and the merit tha
The Quality of PB is the highest with a Reasonable comparatively.Since the Shaft is thicker than usual 1 mm, a rigid feeling when a Torque is imposed is very good, and the ease of grasping of a Grip, the die length of a just right Shaft, and the merit that suiting inserts in are the highest.
Although work using a Driver is improved, it is a favorite of No. 1.
View detail
。 which should be used if it tampers with a fine Screw Merit which suiting inserts in the Grip which is easy to turn.It is a good Driver which can perform delicate work.It does not become a comparison to the precision driver of the cheap article.
。 which should be used if it tampers with a fine Screw
Merit which suiting inserts in the Grip which is easy to turn.It is a good Driver which can perform delicate work.It does not become a comparison to the precision driver of the cheap article.
View detail
All Drivers have used PB regularly. The grasped feel is not too soft, is not too hard, and is an exquisite gripping feeling. I think that Grip form is also the form which adapts itself to a hand dramatically. Although a Dri
All Drivers have used PB regularly.
The grasped feel is not too soft, is not too hard, and is an exquisite gripping feeling.
I think that
Grip form is also the form which adapts itself to a hand dramatically.
Although a Driver point also has a dramatically sharp angle and is easy to be injured in case of a cheap Slotted screwdriver again, I think that the safe side is also considered since the thing of PB has taken R delicately.
Once it uses [
] PB, no Drivers other than PB will get used to the mind care.
Although it is somewhat expensive, it is so good a Driver.
View detail