Reviews
1 pc to save as many Screws as possible.
[How is it used?
When I was working on my motorcycle at home, there were some bolts that could not be removed by the driver, and I had to destroy the screws.
I could have chosen any manufacturer's product, but I chose DAYTONA, which handles a lot of motorcycle products.
Was the one you received as per Image?
It was just like the picture.
Slightly Large? Standard size.
How was your experience with it?
There are some places where it exits as I thought it would when I used it and some places where it does not.
The object must be restrained so that the force does not escape, and it does not seem to be suitable for sideways Screwetc. on a car body, for example.
I was able to remove the screws in areas where the force did not escape, so I will try again by placing them against a wall or something in areas where I could not remove them this time.
[Points to note]
Quantity the object so that the force does not escape as described above.:Set is required.
How did it compare to other products?
I wonder if it is an OEM or the same factory that produces it, since it is identical to the Shock driver of A0tro PROducts. I wonder if it is OEM or the same production factory.
【Review】
Shock drivers are available from various manufacturers, but I think they are relatively inexpensive and of good quality.
There are many types of Bits, so it can be used for Screws in various places.
View detail
Purchased for installation of Armor Handguard.
Purchased to install Armor Handguard, needed to remove Bar End. I think two people are needed to do the work. View detail
Taken!
It worked well for the Gold amount. View detail
DAYTONA Impact screwdriver
DAYTONA Impact Screwdriver This tool is indispensable for working on the engine. More than once I thought to do without it, and the result was a knocked down edge on the bolts and a replacement. Therefore, I ordered an impact screwdriver. I am very satisfied with the quality, everything is good. A separate plus is a metal case. This tool is essential for working on the engine. More than once I thought to do without it, and the result was a knocked down edge on the bolts and a replacement. Therefore and ordered an impact screwdriver. I am very satisfied with the quality, everything is good. A separate plus is the metal case. View detail
I got it off!
CB1300 (sc40) I was having a hard time removing the sticking PlugPin on the front caliper of the
I bought the Shock driver because I thought it would be impossible to remove it with lubricant alone, so I thought the Shock driver would work. I thought it would be impossible to remove it with just lubricant, so I bought a shock driver. I guess having a tool reduces the trouble by half.
View detail
Must have for every tool box
I have stripped screw heads multiple times over the years and did not know a tool like this existed. After I saw this being demonstrated in one of the youtube Videos, I decided to purchase one. Well the day finally came that I needed to use this and without any drama I was able to remove a stubborn screw that otherwise would have ended up stripped.Must have for powersports! It saves stripping out philips screws and small bolts that tend to seize on off-road equipment.This is a must have for working on Japanese bikes. The bits fit the screws on my bikes better than a standard philips and the impact function makes getting stuck screws removed super easy.It comes with the box, there are bits in it. View detail
Graduation from Screw Mountain Licktaro
I don't even remember how many times I have done DIY maintenance for the best of my intentions, and how many times I licked Screws and ran to the Motorcycle shop in tears.
I had been thinking about buying one for a long time and finally bought one when I decided to replace my Brake Disc.
I wondered if I, who had licked countless screws in my life, would be able to remove the screw lock on the Brake Disc. I put everything into this tool.
I hit the Bit with the Hammer with all my might. At first I didn't know how much force to apply, but when it loosened up, the response was sure, and I was impressed, not Largereally exaggerated. I really wish I had bought it earlier. I was able to remove all Bolts without taking a single lick.
The only thing is that I have never used a Shock driver before, so I am embarrassed if my perception is wrong, but the part where the Hammer strikes is not flat but lightly curved, so it sometimes slid and hit my hand. I wonder if this is to prevent too much force from being transmitted.
I don't mind too much because it is not difficult to use, but I wonder why the place to tap is not flat.
All in all, I am satisfied, considering the yet-to-be-seen Screw that I would have destroyed without it.
View detail
Convenient
When the screws are rusted or otherwise not loosened, they can be loosened without licking the screw head.
CompactSize, so it takes up little space, and it is sturdy and secure, so it will last a long time.
View detail
I use it where the workspace is small.
I use this product in a small workspace, the grips are solid and the shaft has a baked-on finish. View detail
For Maintenance
When I was using PlasticType, it was broken, so is there anything good? I was looking for something better, and I found this one and bought it.
You can switch between Straight and T-Shaped, which is nice and easy to use.
In my imagination, I was imagining a little more Small and thin, but it was a little Large. I was thinking of using it with the on-board tools, but it seems to be a bit in the way.
I thought that the grip was not good when tightening unless it was this size.
View detail
It's expensive, but you can hit it as hard as you want.
Off-road motorcycles are prone to rusty screws due to mud, water and dirt. View detail
I use it as an on-board tool.
I carry it on my off-road motorcycle when I play in the mountains. I carry it on my motorcycle as insurance in case there is an accident and the parts around the switch box or handlebar shift because of the rusty environment. View detail
It's in a rather gorgeous Case.
It is in the case made of the red gold genus which reminds of a certain famous foreign tool manufacturer.
The Bit you use is also arranged in a way that makes it easy to identify.
There are a lot of aluminum parts on the exterior of the motorcycle engine, so if you are about to damage the screw, use this product right away.
The video will also be attached to the User vehicle inspection of the motorcycle.
View detail
Compact but effective.
This is a compact size motorcycle shock driver for motorcycles, but it is a sturdy and reliable shock driver. View detail
To the rusty Screw.
It is said to be for motorcycles, but it is also effective for flatbolts that hold the brake discs in the car. View detail
Easy to use.
First of all, the handle can be made into a T shape, so it is easy to turn.
Tighten and loosen it, but you can certainly do it.
Also, the Bit is convenient because it can be installed as is.
Maintenance work is now easier.
View detail