Reviews
I thought I wouldn't have to do without it, but I finally got my hands on it.
[How is it used?
ESTRELLA's filler cap is a type with a minus cutout similar to the Timing Hole Plug, but it is usually opened with a slotted screwdriver with a large slot, so I have not touched the coin driver. I have not touched the coin driver.
One day, I tried to open the filler cap with a slotted screwdriver to put in oil, but I got stuck... I didn't want to do it, but it was an emergency and I tried to open it with a coin, but the coin lost out.
I finally reached out to Coin Driver because I knew I could not turn my back on them.
Was the one you received as per Image?
Although the shape itself was the same as the product image, the actual product seemed smaller (compact) than I had expected.
This was not a problem, as the compact design is more convenient to keep in a tool box.
How was your experience with it?
It was the first time for me to use the Coin driver, and I was a little worried if it would fit because there was no description of size and so on, but I was able to use it on ESTRELLA and Filler cap without any problem. I was able to open it safely.
[Points to note]
Even though it is a Coin driver, I think it is indeed useless if the Size is not right.
It is a good idea to check the Size of the part to be used before purchasing.
How did it compare to other products?
It definitely works better than Coin.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
In addition to removing the interior lining
I bought it to remove the interior lining of my car, but I thought it could also be used to remove and install the Fuel Hose, so I tried it and it was very easy to remove.
The width is 10mm, so only the tip can be inserted, but the Fuel Hose is also new, and it is easier to take out the Large because I used to have a hard time taking it out.
Of course, it can be used to remove the interior lining without any problem.
I am satisfied with the low price.
View detail
It's safe to use
I always use Sk11 tools. This product is also well made and easy to use! View detail
Special Tool in a sense
I had a slightly smaller long driver in the carburetor setting, so I used that, but it was not good enough.
(15cm for No.1Driver, 30cm for No.2Driver)
ThrowAdjust Screw (PilotAdjust Screw) I was looking for a slotted screwdriver for the head of the No.1 driver and one that is at least 20 cm long.
Then I found this product and bought it, thinking it would probably be Large sturdy since it is 25cm long.
Since we are using PWK for APE, all Adjust Screws are on the Left Side and OEMEngine Layout, but the carburetor is installed diagonally Right, so unfortunately it is shadowed by the Frame, I thought it would be better to change the way of thinking and look for a tool that can be used for a long and thin time.
Surprisingly, it was easy to use and set up, and I'm glad I was able to save more time than before.
View detail
Sk11 tool good.
It's a good value for the money and well made, useful in tight places where drivers and such can't get in. I have used other sk11 tools and they are very good and reliable.
Thank you very much.
View detail
It is not necessary to have it, but it is convenient to have it.
At this price, you won't feel like you're missing out if you have one.
The thicker grips make it easy to hold and apply force, and it is definitely easier to turn than using a 500-yen coin.
View detail
Unfortunately, it did not come off.
[How is it used?
The front coverBolt on the Scooter has taken a licking.
I bought it.
Was the one you received as per Image?
They did a Screw cut that bites firmly into the Plus screw that has been licked.
How was your experience with it?
As a result, the Rusty and sticking Screws were not scared.
[Points to note]
It says to remove it by tapping it with Hammer, but be careful because tapping sometimes changes the direction of rotation.
View detail
Screw Catch DV No.470
I haven't used the Screw catch yet, but it seems to work well in tight places without dropping the Screw. However, it may be a little difficult to push down by hand in tight places. View detail
Easy to use
A firm magnetic force is applied by simply rubbing the Driver about 5 times.
It is very convenient because it can be hooked onto the tip of the Driver to avoid dropping Screws, etc. into tight places.
View detail
Easy to work with
The grips are easy to grip and the Torque is firmly applied, making it easy to use. View detail
Good
Ideal for loosening sticking screws.
It is a Penetrating Driver, so if you tap it with a Hammer and make it bite firmly, it will not lick.
The tip also does not slip, so Torque can be applied firmly.
View detail
I don't use it that much in Motorcycle, but it's handy to have.
I think it is the smallest ClipTool for use on a motorbike. I often use this product in my car, and it is very easy to use. View detail
You don't have to, but it's definitely useful to have.
Such a delicate tool Coin driver.
Well, it's a lot better than twisting a dime and bending it.
It's not priced so low that you'll hesitate to buy it, but it's not so cheap that it won't add to your shipping costs either.
View detail
It also loosens the hard screw.
It is the best for loosening the screw which is rusted and hardened, and since it is a Penetrating Driver, it can be tapped with Hammer and bite firmly even if it is licked and the tip does not slip, so you can apply Torque firmly. View detail
Saves you the trouble of disassembly
It is useful for loosening and tightening the Plus screw in remote places. If it is a normal driver, it can reach directly to the place which cannot be reached without disassembling the surroundings, and Grip is easy to grip and can hang Torque firmly. View detail
SK11Coin driver
I bought the SK11 Coin driver. Until now, I had been turning it in the appropriate way with Gold. I bought this driver and was able to turn it very comfortably. I'm glad I bought it just because I don't have to look for the right one. View detail
Convenient to have on-board tools
If you are a do-it-yourselfer, such as changing the Jet on your Carburetor, it would be handy to have in your car tool.
If you replace the Bit with a Long Bit, you can turn a Jet or a cover of a carburetor in a small space, and you can apply Torque firmly.
Recommended
View detail
It's very easy to use.
Firm magnetic force is applied by rubbing the Driver only about five times. Because the guidance to the screw pile to the narrow place can be done with the tip of Driver, it is very convenient. Of course, it is also effective in loosening the screw, so you can use it without worrying about losing it. View detail
Easy to use
[Contents] One set is also a great way to maintain your motorcycle and car at home. The price is affordable and very convenient. View detail
The cues are something to behold.
The usefulness of having one in the house is infinitely large, from changing the battery in your watch to changing the battery in your car Key less key.:It comes in a set, so it doesn't get in the way and can be stored anywhere. View detail