Reviews
Drumstickn, Drumstickn!
I often make my own parts for ZEPHYR400 and CUB90. I often use Aluminum plate as material.
For the cutout, we used different tools depending on the thickness:Gold scissors tend to bend the object while cutting, and an iron saw tends to blur the cutting line. It took a lot of time and effort to make the final correction and polish it to make it less noticeable.
I had never seen SK-11's Hand nibbler tool in person, so I did not have an Image to use it. I had never seen a hand nibbler before, so I did not have an image of using it. I purchased it and found it easy to use, and I enjoyed cutting aluminum and steel plates. It is not like cutting with a normal scissors, but with a drumstick, a drumstick, a drumstick.
The blade is a sturdy Square Type with a thickness of approximately 6mm. The blade is clamped between the blade and the board, and the blade moves down and cuts off the board in one grip. The grip force varies depending on the material and thickness to be cut; even aluminum plates are quite tiring. It is easier to cut by gripping the blade or placing the lower side of the fixed grip against the flat surface of the worktable and pushing the working grip in with your arm strength.
I had a person with a weak grip use it; he could not cut a 1mm Aluminum board with one grip. I think it has something to do with the strength. I'm afraid that if I force myself to grip it too tight, I'll hurt my fingernails." I was told. I could use a leather hand, but it is dangerous and difficult to slip.
Because of the thickness of the blade, the cut will drop about 6mm worth of cuttings. In the case of an iron saw, it will be about 2mm worth of iron dust. It is better to use different tools considering the labor and the processing time after cutting.
The blade bite was good when new, but the blade is starting to round off a bit. It would be nice to replace or polish the blade, but since it is inexpensive, it may be a good idea to replace it.
If you want to make longer cuts, you can choose an electric saw. However, for small workpieces, SK-11's Hand nibbler is sufficient.
View detail
A quality product that is robust and well-liked by the public.
When creating a Brake hose, I had to cut the outer Wire in a batten, but the Nipper I had was not good enough, so I bought an extra one.
To begin with, this work requires cutting thin steel wire in batches at once, which is impossible with a half-hearted nipper.
The inferior products sold at Home center do not disconnect at all in the first place.
I was very happy with KNIPEX and Belzer's Nipper when I used them in the past, so this time I bought KNIPEX again, which cuts more to my liking.
Both cut well, but the feel of the cut is the exact opposite.
Snap! Belzer can be cut with a feel like a nail clipper, while KNIPEX can be cut with a "hang" feel! The KNIPEX has a "hang" feel to it.
Personally, I like the way KNIPEX cuts.
Both are powerful nippers that cut well, but if used in extreme continuous use, the sharpness deteriorates quickly after a certain point.
However, to my surprise, both of them regain their sharpness after an overnight rest.
I still don't know why resting it restores sharpness.
It is not a beautiful Plating surface finish, so only those who have used KNIPEX will know how good it is.
Black surface finish (is it a homo treatment or something?) is like Black dyeing, so the sense of luxury is Zero!
KNIPEX is good, although it is not flashy and not at all spectacular when it is in the tool box.
（If you like to have a sharp cut, I recommend the Belzer! If you like to cut with a "snap", I recommend Belzer, although Webike does not carry it! I wonder if the company still exists? (I haven't seen them at all, so they might be bankrupt already...)
View detail
Sturdy! Heavy! Good texture!
To be honest, it's pretty heavy, but it's sturdy and can knock out anything VANVAN! Even copper wire and discarded Tire Wire.
It's a recommendation because it can be cut! Grip part is also easy to hold and non-slip!
View detail
Even hard objects can be cut immediately!
Hard objects can be easily cut.
I use it to cut Balance weight of Wheel.
It cuts so good!
View detail
Incredibly powerful Nipper
You can tell when you hold it in your hand, but it is extremely rugged.
Even the thicker number line can be easily cut with Drumstick.
It is a quintessential KNIPEX product.
However, the blade tip is thick, so it is not suitable for fine work.
View detail
Large handle, easy to apply force, good material!
This is a Nipper with a Large handle for easy leverage, and the Vanadium steel makes it very sturdy! View detail
sharp (blade)
Easy-to-hold Grip and excellent sharpness allows cutting with light force.
It is made with great precision and care, so it is durable and can be used for a long time.
The price is a little high, but it is satisfactory.
View detail
cheap
The Grip is easy to grip for its low price, and allows you to put a lot of force into it.
The feel is not bad, and it is easy to cut even hard objects, and the sharpness is very good.
The performance is good enough for this price.
View detail
outstanding
The easy-to-hold grips allow for a firm grip, so cutting can be done even with light force.
The sharpness is excellent.
The blade alignment is highly accurate, and the material is sturdy and durable.
View detail
easy to grasp
Grip is easy to grip and cuts well.
The blade is strong and durable, so it can be used for a long time. The blade is also strong, making it easy to cut even hard objects.
It is a convenient Nipper.
View detail
regular product
I always choose KNIPEX.
This Nipper can also cut Piano wire, so it can be used for anything.
The grip is firm and easy to grasp, and the surface is non-slip.
The sharpness is excellent, so it is pleasant to use.
I can recommend it
View detail
Nipper made by DAYTONA
[How is it used?
Used for Motorcycle maintenance. Used for cutting inHemp palmock and Wiring.
Was the one you received as per Image?
Because I did not look at the total length carefully, it seemed much larger than the Image image.
How was your experience with it?
Although it requires a little more force than the spring-loaded type, the extra-thick grips make cutting easy.
[Points to note]
Nothing in particular, but the product itself is quite large, so I find it difficult to push it into a small space.
How did it compare to other products?
I have only used cheap 100-yen ones, so I can't give you a reference, but compared to those, I think the ease of use and accuracy (cutting power) are both of a high standard. I think it is better to buy a good one, even if it is a little expensive, because it is not something you replace often.
Other items that would be helpful
Opinions and requests to Manufacturer
It would be even better if it were available in a smaller size.
View detail
Excellent sharpness and durability
Cutting Wiring jacket, copper wire, gold needles, Tie Wrap, and many other cutting tasks are involved in maintenance, but KTC is long lasting and always supports me without any change in sharpness! View detail
This is my favorite tool.
I bought the Tools Set on my Transporter because the blade was broken on the Nipper at SIGNET. New blades are the best because they are still sharp. Tools are consumables. View detail
Easy to use
I didn't know there was something so useful
I used to have to hold a piece of Tie Wrap in one hand to keep it from flying off or flying off
I didn't want to go out of my way to pick it up or anything, it was a real pain in the ass
I just happened to find it and bought it, and it's great!
I regret that I could have worked without Stress if I had known about it earlier
Please try it out
View detail
For Motorcycle work Barpper's Nipper!
I got lost as KNIPEX, but the bar code is thinner at the tip of the blade and working on Motorcycle (Disconnection of Tie Wrap etc.) I thought that it was suitable for purchasing. Of course if you cut at the root you can also cut the Piano line lightly.
Also, since the picture is the previous MODEL, we recommend that you purchase from those who wish there (Pictures may change on the way).
The new MODEL is easier to put in and out of Spring, but those who can do off-road and people who touch Oil sticky hands are easy to enter Garbage in the gap, so KNIPEX, wiha, MODEL before Bar Code etc. But maybe. Those who want to care Bar code is suitable for Motorcycle work.
View detail
One suitable for electric work
I bought it as a tool for Motorcycle, but the application is various and it is the best one for electronic work. Even though Nipper, I will do a reasonable amount of gold, but if I think of life as cheap.
Even the ease of use is perfect, the handy feeling is also the best because the making is also truly KNIPEX, and satisfaction is quite high even after making from looking appearance.
This Type has Clamp, so cut it, for example Tie Wrapetc. When you cut it will not be removed, will remain grasped.
So, the disconnected Garbage will never remain in Motorcycle or surroundings. People who have trouble with it, I think that it is good to choose without Clamp.
View detail
[Webike Monitor] It is as reputation and goes out well. Since it is easy to put in power that it is very much easy to have a place of a Grip thickly, it is good. Since it is the structure whose dental portion is also fairly strong, durability is also ex
[Webike Monitor] It is as reputation and goes out well. Since it is easy to put in power that it is very much easy to have a place of a Grip thickly, it is good. Since it is the structure whose dental portion is also fairly strong, durability is also expectable. It purchased and was a correct answer. View detail
Although it is expensive, a cutting edge is hardly strongly missing rather than the Nipper which was being used until now, and it goes out very lightly. Moreover, it is good, and power is added easily, thanks to a thick Grip, and the skid effect of a Gri
Although it is expensive, a cutting edge is hardly strongly missing rather than the Nipper which was being used until now, and it goes out very lightly.
Moreover, it is good, and power is added easily, thanks to a thick Grip, and the skid effect of a Grip is also easy-to-use.
The Nipper of
KNIPEX is very much pleased with many kinds of product.
View detail
It is a nipper of a manufacturer called a knipex (KNIPEX). It is a purchase nipper 200-mm plating type in die length about the KNIPEX powerful type slant 7505-200. can't KNIPEX (following knipex) be said to be popularity most as a tool manufacture
It is a nipper of a manufacturer called a knipex (KNIPEX).
It is a purchase nipper 200-mm plating type in die length about the KNIPEX powerful type slant 7505-200.
can't KNIPEX (following knipex) be said to be popularity most as a tool manufacturer of a pliers system tool?
A knipex is the tool manufacturer established by the germany in 1882, and understands immediately that very delicate structure and design, and coloring are knipexes at a glance wonderfully.
A hand is fitted very much and it is easy to grasp.
the direction of 180 mm comes out well and peevish [ since my hand is large, are a 200 mm type, but ] for some persons
View detail