Reviews
Moderately useful Ratchet
[How is it used?
Used for installation of purchased parts and simple maintenance
How was your experience with it?
I like the Small TypeHead Ratchet because it makes it easy to access tight spaces, which is often the case when messing around with motorcycles.
Furthermore, the handle is made of resin, so even if you accidentally hit the body of the car when you turn it quickly with the Head, it will not be damaged thanks to the resin, which is a very high point.
Socket is also push-locked and smooth with 72 GEAR
Cost performance is quite good.
How did it compare to other products?
I also have KTC, Tone, and Koken Ratchet.
SK11 is by far the smallest in terms of head compactness.
I don't think it can handle LargeTorque, but for light maintenance, this is sufficient.
[Points to note]
Unlike KTCetc., it is not overhaulable, so if it breaks, you have to discard it.
I'm sure you will be able to find a new one. I guess the good thing is that it is inexpensive and can be replaced without hesitation.
Buy one as it is easy to use as a miscellaneous tool.
It is easy to use, and I am sure it will become the number one in use.
View detail
Long is needed and
When using the Castle Nut 24mm Socket (3/8 9.5mm) for Elumi's chain adjustment, we wanted a longer length for the Ratchet Handlebar and decided on this product, which can be used in six different lengths from 255mm to 370mm and can also be used in shorter lengths, which are used more frequently.
I used it fully extended this time, and it is easy to use due to its length and moderate weight. Also, the bend at the tip was effective in preventing the hand holding the handlebar from hitting the Fenderretc.
I usually use a ratchet handlebar with a length of 230mm or less, but it is also good to have a telescopic product for motorcycles, although it is used less frequently.
View detail
Small, Compact
I wanted a compact, small-sized product that could be used as an in-vehicle tool, so I purchased this one.
It is quite small. Large enough not to get in the way, tough to apply strong force, but usable enough.
It is a useful tool, although it is difficult to convert the tightening direction due to its small size. The selling price is a little high, though.
View detail
Compact
I purchased the Ratchet because I thought it would be convenient and easy to use for in-vehicle use and for small occasions.
It is really small. The small size does not allow for a lot of force to be applied.
High selling price (The price is going up.) It is a pity.
View detail
First time at Shivuichi
type of sushi with a single tile discarded on the bottom (now called a "shibuichi") (1/4) I have never used the "Ratchet Driver", but I would like to use it as a Ratchet Driver.
Purchase
I found that Size is surprisingly useful for parts that do not require much Torque or when you want to turn quickly.
GEAR is solid and push release type.
This price is a great cosmetic.
View detail
As a Driver
Purchased as Ratchet driver.
I don't have basic tools for 1/4 and mostly 3/8.
Bit Adapter SocketSBA2 is attached to it.
Tone for fast turnaround (TONE) Quick adapter QA-02S is also installed.
I thought it might be too small for my palm size, but it is just right.
Especially, the weight of the thick part at the end of the Grip is a good weight when turning quickly.
It is easy to turn.
Bit uses Wera.
View detail
Bring the narrow space?
I was looking at Webig's tools and found the Smallest Ratchet Handlebar and immediately bought it because I thought it would be useful in tight places. I have not used it yet, but it is great for tight spaces. I am glad I bought it. View detail
Operability is not good
The basic functions are sufficient and I can use it without any problems for normal use.
It is also inexpensive and easy to buy.
I use it frequently and it never breaks, so I think it is very durable.
However, it is difficult to switch the direction of Ratchet.
This is an area for improvement, as it is slippery when operated with Oil-covered hands.
View detail
Reliable quality
The first thing I thought when I received the product was that it was solid for the low price. Fujiwara Sangyo's tools are cheap but very solid, which is very helpful for DIYers. However, the Spinner Handlebar of this size is not used very often. View detail
High cost performance, good finish
As a Ratchet Handlebar for everyday use.
The large bolt nut is used for quick tightening and loosening during the final tightening and loosening of the Spinner Handlebar and Torque wrench.
The ratchet is fine with 72 teeth, and the drive noise is quiet and it turns lightly, not rough as cheap ones often are.
I thought the switching lever would be Design priority, but I have no problem operating it.
The push button for release is easy to press, and the neck has a moderate movement.
However, because of this length, the number of torques that can be applied is limited, but given the intended use, this should not be a problem.
It's very compact, so it's good for in-vehicle use.
I'm giving it three normal stars because I don't know how durable it is until I actually use it, but it's not likely to break if I do amateur maintenance.
For this price, I have no complaints about this finish.
View detail
For on-board tools
It is the Size feeling of Exactly in the vehicle tool.
I carry this Ratchet and the necessary Socket in my NylonPorch. It is recommended for the person who wants to put together the in-vehicle tool compactly.
View detail
1/2 for Axle Shaft
I use a large socket to loosen the nut of the Axle Shaft, but I only have 3/8 size at home, so I bought this 1/2. This time I bought this 1/2. View detail
Finally I bought it
I've been wanting to buy one for a long time, but I didn't get around to it, but recently I finally did It's not likely to be used very often, but it seems to be effective when you want to work in a narrow space or turn it quickly It seems not to have many appearances, but it seems to be effective in working in a narrow space or when you want to turn it quickly I'm sure there are better and more expensive ones out there, but for me, this is good enough View detail
Cospa is good
I used to use a 36 pile Ratchet Handlebar that I purchased at Home center It has a small head and the 72 mountain is very comfortable to use and I like it It's also very comfortable to use:Pair (for Left and Right) I like the fact that the rotation switch Lever doesn't move when you touch it when you are turning it I use it often The good stuff I thought it would be a good choice, but I'm happy with how it feels at this price without the luxury View detail
I like the stretching feature!
I bought it as a maintenance tool
It works well enough as a Ratchet, but it has a telescoping feature that allows you to adapt it to situations where you need to exert yourself It can be used properly by stretching it out
I was satisfied
View detail
Used when changing Tire
I used it to remove the Axle Shaft I have a torque wrench with a length of 500mm, but it is better not to use it for anything other than tightening I was worried that the 300mm might be too short The Bolt of 88Nm Torque came loose easily It is the right decision because this length can be used for forest road touring View detail
Good Cost performance
The function as Ratchet is sufficient and can be used without problems.
At this price quality and function are no problem.
I am worried about future durability.
View detail