Reviews
This is a useful tool that one should have at home!
[How is it used?
I had been using a cheap Ratchet Handlebar, but it started behaving suspiciously, so I bought a new one.
Was the one you received as per Image?
KTC is a quintessential KTC company. It has a solid weight, stable operation, and I could tell immediately that it is of high quality. The tool is just as I expected.
How was your experience with it?
Accurate and stable tightening and loosening.
Although the handles are plating instead of rubber, they are less susceptible to deterioration than rubber, so durability can be expected.
[Points to note]
The switching is no problem, and it can be changed from Snap to Snap, which is totally different from cheap ones. It can be used without any problem even if it is applied in a slightly large Torque.
How did it compare to other products?
I have only used cheap ones so this may not be helpful, but I wish I had purchased it earlier as it has enabled me to install and maintain Parts accurately and consistently.
KTC is the best. It is so good that it makes me think of replacing other tools with KTC little by little.
View detail
Excellent Ratchet
This Ratchet has a high quality luxurious feel. I have used twice since recieveing more than a week ago and find myself reaching for it between projects just to appreciate the feeling of it in my hand. This tool is very useful in tight spaces working on the back of the engine block between the block and firewall, or underneath the windshield cowl. The swivel provides a favorable angle, and the ratchet offers low backdrag and lots of leverage. I am on the east coast of the USA and DHL delivered this package in only 36 hours. Webike is an excellent vendor. View detail
It's still good
I think it is indeed KTC. I have never used SwivelRatchet before.
The head part is small, and the swivel can be adjusted to your liking, making it easy to use.
The Knurl on the Grip is just right for my middle finger, and it is easy to apply force.
The surface finish is also beautiful, and although it is not as good as Nepros, the shine of the Plating is good and satisfies the sense of ownership.
View detail
You could have at least one.
I thought that all Ratchet Handlebars are not that great, but KTC's Ratchet moves smoothly.
I would say it has more of a muffled or muffled feeling.
I bought it because I thought the quality was worth the price and that I could have at least one in this price range, and I'm glad I did.
I knew that Home center tools are different from a good brand. (Don't mention that they are sold at Home center, too...)
View detail
Is good
The quality and performance are well worth the price.
GEAR is also very easy to use because it is delicate, easy to swing around and easy to apply force even in places where there are no angles.
View detail
Handlebar feels good with 90-degrees rotation
I bought it because it can be tightened and seems to be able to be turned quickly at the clamping place.
It has replaced the ordinary Ratchet wrench and is now one of the Main tools.
About 55 Nm (Axle Shaft) is the upper Torque value I have used, but
We have been able to use the system without any problems.
I guess the fact that the handlebar turns more than 180 degrees is the selling point.
The handlebar swings in both directions even when it is straightened for fast turning, so it is difficult to turn the handlebar during fast turning.
The ratchet part can be maintained (parts are available), so it can be used for a long time.
It is good for those who are looking for a Ratchet wrench in the future.
View detail
The switching lever may be difficult to turn…
I bought the KTCSwivelRatchet because it was the right length.
The total length is 180mm.
Overall, it's good, but Quantity:Pair (for Left and Right) The height of the switching lever is too low to turn it quickly.
It might be a little annoying…
Quantity:I have to turn it like I'm pushing the toes of my 2pc fingers to switch it.
Is it just a matter of getting used to it?
I can turn the Straight SwivelRatchet quickly, though.
However, I haven't used Straight's SwivelRatchet because its length is too short.
View detail
The mighty Ratchet
If you buy it for the time being, it is the first of OKBrand, Ratchet of KTC.
The characteristics are, after all, ”unyielding”and strong”.
When it comes to Ratchet, it's Snap-Fat. If it's FOR JAPAN MODELManufacturer, k◯-Ken is a famous place.
9.It's a 5sq ratchet, 180mm in length, but it does the job well even if you're foolish enough to take on a Large Bolt/Nut, which is obviously disproportionate to its appearance.
In addition, even if you continue to use it in such an unbroken way, there is no sign of breaking, and even if it breaks, it is immortal that the repair kit is sold.
But at the cost of that fortitude.
Head is Large size.
Weight is heavy.
Overly rigid
Idle TorqueLarge finite
and is generally a Power type.
You need to be careful about the stiffness of the points, especially since the Bolt under M6 is especially easy to nudge.
Ratchet is a basic tool designed by each manufacturer with various ideas, and the price is only a pin.
For now, it can be a good recommendation for those who want to have a good ”one”there” as their first pc as a standard.
View detail
It's a DIY must!
I've been working on this one for quite a while!
It's made by KTC, so you can be sure the thing will work!
It's pretty much Recommendation's tool.
View detail
Large eyes to remove Nut.
Ratchet is a little large fine-grained size to worry about the damage.
It is used for Nut loosening of
This is handy to have.
View detail
I thought the cheap ones would suffice.
I was using another cheap Tool, but compared to this one...
The notch is light and has little play, making it easy to tighten in tight spaces.
The Push button on the Socket doesn't stick out, so it doesn't get in the way.
This is the only thing that makes a difference, but it makes a huge difference in workability.
View detail
It comes in handy when you need to loosen up.
[How is it used?
When you loosen it. "Torque to a degree. This is useful in situations where you need to
How was your experience with it?
It is long enough and the handle is easy to grip and gives the impression of being easy to use.
How did it compare to other products?
I'm an amateur worker. It's a good tool. thinking "KTC Products I chose the
[Points to note]
"Not every Bolt & Nut can be loosened. Please pay attention to this.
[ITEMS TO BUY TOGETHER
Hex Socket. And etc. "KTC" The following is a recommendation to align with
It's the amateur workers. "Good tools. I think you should use
View detail
KtcParenthesis good
The insert is Button style and looks high quality. I recommend it. View detail
Easy to use even in hard-to-reach places
This is advantageous in tight spaces, where there is not enough space to turn the Ratchet, and adding Extension to it is a good solution for large areas. I don't use it in places where I need a very strong Torque. View detail
You can use this to loosen hard bolts under 22mm.
Aside from WR250X and R, which are loosened by special big Nut of 27mm, Bolt of 22mm or less is loosened by this. So, I used the large size 12, 7 spinner, ratchet and Torx wrench only for 27mm. View detail
It's my buddy who loosens the Axle Nut.
The WR250X has a high torque of 12.5kg on the rear axle, and the Yamaha has a particularly strong torque on the axle nut. Anyway, as with any other bike, if you have a high torque bolt, use the spinner handlebar to firmly apply pressure to the socket perpendicular to the bolt to remove it, it's easier and you don't have to worry about licking the bolt! View detail
It's only Ratchet, but it's still Ratchet
Do you think a cheap Ratchet is enough? Please use a proper tool once. Don't lick the screw or bolt head, or put the power in a strange direction, and you will end up destroying your car. View detail
It's beyond the price.
The GEAR is also very solidly built and the quality and performance is well worth the price, with a handle that is easy to use and force, even in sensitive and non-angled areas. View detail
Best for Motorcycle maintenance.
I was using a Spinner Handlebar for working on the car which can be used for WheelAxle Nutetc. But I'm a little worried because I use Glasses Wrench to loosen the narrow place where I can't use it. I want to loosen it by using a hexagonal Socket as much as possible. I bought it on impulse after watching a YouTube video that I often watch. It's so comfortable to use - Kyoto Tool! View detail
Reliable Brand
It's KTC, so I can buy and use it with confidence.
I don't choose KTC as my only tool choice, but I think it's the one I would choose if I had a lot of opportunities to choose.
I enjoy buying the Manufacturer's stuff and types of tools whenever I want.
View detail