Reviews
Fast turn support, rigid enough to be the best
The 3715SLK is equipped with an idle grip for fast turning, although the data on the Webig product data is not completely clear. The handlebar is equipped with a ball point that can be locked at the center.
I think this is the best product for those who are looking for a 3/8Size THandlebar, but it would be impossible to purchase from this product Data. I think it's a lost opportunity, but since it's a well-known product, everyone buys it from FACTORYGEAR or Amazon, so I guess it's not inconvenient?
View detail
A must have for working in your bike!!!
This tool helps a lot when you need fast screwing. Sometimes you do not need carry many tools, the simple is the best... :-) View detail
Easy to use
Grip with non-slip surface is easy to grip and work with.
It is convenient to remove the Clip without exerting force.
View detail
Basic Tools
As expected from Kohken.
The quality is reliable with a good balance between price and quality.
It is easy to use because it is easy to apply force and has a good feel.
Balance is also good so it spins around.
The fit with Bolt is also very precise and does not lick.
View detail
Grip is easy to grip.
The grip with non-slip surface makes it easy to remove clips such as DoorLining, etc. Since it is a special tool for removing clips, it is convenient to remove the clips left on the panel without breaking. View detail
I use it for front axle.
I bought it as a tool to turn the Axle when removing and installing the Front Wheel.
It takes a surprising amount of time to turn it around in Ratchet.
With this tool, it is possible to detach and attach to SPIDI.
The Shake Type allows for a final tightening, but I used the Torque wrench, so I went with this type.
View detail
Required for special vehicles.
The Axle Nut can only be removed by turning the rear wheel of AGUSTA with this spinner handle with great force.
I tried it with a short-handled Handlebar at first, but it didn't freak me out.
It's a necessity for those who remove the rear wheel.
View detail
Flailing Torque is light
It is a 1/2 size Ratchet Handlebar
There's not much to do in the maintenance of a Motorcycle, but
There are occasional opportunities to loosen up the Axle and so on
It is convenient to have
Ko-Ken's Ratchet is good but the flailing Torque is light
A small number of GEAR is a drawback
There are a lot of situations where Ratchet can swing Large in 1/2 Size
You don't have to be a mainstream GEAR to use it these days
It is robust enough that it is not likely to be broken even if you hang a large torque on it because of the small number of GEAR measure
And Ko-Ken's unique Knurl process with a slippery handle that was cut into a groove seems to be a favorite But it's so great that I think it's the only one that fits
View detail
Easy to use
As expected it is easy to use koken.
Balance with price is also good, it is a quality that can be relieved.
Because Head does not become obstructive and disturbing like Ratchet Handlebar,
Spinner handle is useful for Quick work.
View detail
Is it the product which specialized in the Motorcycle? If it devises, it will also become a Spinner Handle small also to a Driver.However, the Driver is easier-to-use and power does not enter rather than a Spinner Handle.Since it is compact, is it an
Is it the product which specialized in the Motorcycle?
If it devises, it will also become a Spinner Handle small also to a Driver.However, the Driver is easier-to-use and power does not enter rather than a Spinner Handle.Since it is compact, is it an original manner of use which is put in as an urgent in-vehicle tool?A Recommendation has both at a disagreeable person.
View detail
It is a Spinner Handle of 1/2-inch angle corresponding to the place used by high torque rather than 3/8-inch angle which is a general Socket size as a tool of a motorcycle. -- individual -- good -- everybody -- although it is a product by Cau Ke
It is a Spinner Handle of
1/2-inch angle corresponding to the place used by high torque rather than
3/8-inch angle which is a general Socket size as a tool of a motorcycle. -- individual -- good -- everybody -- although it is a product by Cau Ken, it is an agreeable impression which the Socket-joint portion at the tip of
moves with a Snap.although the photograph is in the state equipped with the Socket for Bolts with a big width across flat used for a car body --
-- it turns also around the Bolt which adhered to firmly snappily.Only by
, however this, if work is impossible and a 1/2-inch angle Socket is not newly purchased, it is die length as seen with the
photograph, and will be a literal useless thing.
View detail
[Webike Monitor] By a in-vehicle tool, since 2 and having are inconvenient, a Driver is corresponded with a Socket. The Handle which can use , therefore a Socket was purchased. Since it can use even if it bends, even when it is straigh
[Webike Monitor] By a
in-vehicle tool, since 2 and having are inconvenient, a Driver is corresponded with a Socket.
The Handle which can use
, therefore a Socket was purchased.
Since it can use even if it bends, even when it is straight, I think that user-friendliness is good as an in-vehicle tool.
When you buy it as a tool for daily use, in order that there may be no Ratchet function, it seems that it is inconvenient.
View detail
even if there is also die length moderately and it seldom puts in power, it is closed firmly -- -- if the place which is used for a long time is good -- ♪
even if there is also die length moderately and it seldom puts in power, it is closed firmly -- -- if the place which is used for a long time is good -- ♪ View detail
Structure is solid although it is an unaffected tool. Since it is fixed lightly every 90 degrees, the portion which attaches the Socket has good user-friendliness, and if a stick is inserted in the hole of the portion of a handle, it can be
Structure is solid although it is an unaffected tool.
Since it is fixed lightly every 90 degrees, the portion which attaches the
Socket has good
user-friendliness, and if a stick is inserted in the hole of the portion of a handle, it can be used also as a 600-mm long T character
Handle.
Probably,
special character exertion is a point which can carry out
of loosening the Screw which has become tight with high torque taking advantage of die length of 600 mm.
Since a Torque starts too much conversely as for bolting, careful cautions may be necessity.
View detail
It uses for removing the Rear-wheel Nut of Ducati748. The power applied although about 300-mm L character Handle was used before is in a completely different class. the accuracy of each part is high and a Head and a Socket suit -- Locke -- and dust is c
It uses for removing the Rear-wheel Nut of Ducati748.
The power applied although about 300-mm L character Handle was used before is in a completely different class.
the accuracy of each part is high and a Head and a Socket suit -- Locke -- and dust is carried out.
Moreover, since the height in the state where the Head was pushed down as compared with other Manufacturers is stopped, power can be applied correctly.
Although
one chose the MODEL of the Knurl, there are a resin grip and other Mirrors.
Mr. Cau Ken who prepares a choice by people since it is various which is easy-to-use is true.
Even if it should damage a
head part, a repair Parts is obtained at a low price.
He was actually helped by Colet.
But it seems that a Torque or kicking are wrong and it hardly breaks in anticipated use until it breaks.
Although the frequency to be used may be low, by a good tool, the work which requires big power is done rightly and cooked.
View detail
Although which goods are chosen apparently, it is the same goods, but the point considered that this product of Ko-Ken gets across to a Socket exactly, without power escaping since the Shaft has an ellipse instead of a round head thinks that it wo
Although which goods are chosen apparently, it is the same goods, but the point considered that this product of
Ko-Ken gets across to a Socket exactly, without
power escaping since the Shaft has an ellipse instead of a round head thinks that it won compared with the product of
other company.
View detail
[a Webike Monitor] -- in-vehicle -- business and a tool for daily use -- purchase. The feel of die length or a Handle is also good. I think that it can use also for the place which needs a Torque to some extent since it can slide. Suc
[a Webike Monitor] --
in-vehicle -- business and a tool for daily use -- purchase.
The feel of
die length or a Handle is also good.
I think that it can use also for the place which needs a Torque to some extent since it can slide.
Such a device is numbed again as the Shaft has an elliptical form.
I think that less than the PRO that does easy maintenance has value over which it passes enough even if it is not a highest-class tool.
He is wonderful Brando who can trust it.
View detail
[Webike Monitor] It purchased in order to loosen the Rear-axle Nut of Ducati848. Although it remained unmoved by the Spinner Handle of 50-cm length, it can loosen now easily and is large satisfaction! It is and structure was solid as ex
[Webike Monitor] It purchased in order to loosen the Rear-axle Nut of
Ducati848.
Although it remained unmoved by the Spinner Handle of
50-cm length, it can loosen now easily and is large satisfaction!
It is and structure was solid as expensive, but since the honest structure so far did not have undue importance to itself, when there was a low-priced edition, I thought that it was good.
View detail
It thought whether the Handle could go by this one as a member of a portable tool Set, and purchased. If a trial is actually carried out and it sees, it lengthens straight, and since a joint part does not have fidelity and is thin as a Driver g
It thought whether the Handle could go by this one as a member of a portable tool Set, and purchased.
If a trial is actually carried out and it sees, it lengthens straight, and since a joint part does not have fidelity and is thin as a Driver grip when using like a Driver, it will not be kicked in a Torque.
the place which exterior attachment outside will carry out and will be more than it sufficiently but at the Torque of a grade if an L form is used -- Handle length -- as a Handle of the portable tool kit of the Motorcycle Touring that it is short and there are no Torque guide pegs, it has just become, without that which is good for the back is bad for the head.
The use has been lost although it is my selection mistake.
View detail
It has the product of the old specification, and by the present specification, an axis becomes an ellipse, Round-and-round times become that an angle Drive part does not have less, and also when a Stopper moreover takes lessons from a center position and
It has the product of the old specification, and by the present specification, an axis becomes an ellipse, Round-and-round times become that an angle Drive part does not have less, and also when a Stopper moreover takes lessons from a center position and it uses as a T Handle, condition has become good.
For this reason, the product of the old specification would return to private life, will be struck, and will follow the second life as a stick.
At a Garage, it is NO as to whether if it then combines with an Extension bar, it is easy-to-use as an omnipotent Handle which becomes T Wrench and L Wrench.
That it is that which is good for the back is bad for the head generates that the die length of a Handle is fixation after all.
Therefore, when I fix at a Garage, a Sliding handle does not use.
If convinced to the above-mentioned restrictions, a Merit will come out as a portable tool of the two-wheel Touring which wants to reduce a property.
I am made to carry when running the Tool roll settled in a cylinder 200 mm in die length in the combination of this Handle, a Socket required for the Extension bar of two merits and demerits, and a Socket rail, and a Bit holder with a long distance and a friend.
View detail