Reviews
This is a useful tool that one should have at home!
[How is it used?
I had been using a cheap Ratchet Handlebar, but it started behaving suspiciously, so I bought a new one.
Was the one you received as per Image?
KTC is a quintessential KTC company. It has a solid weight, stable operation, and I could tell immediately that it is of high quality. The tool is just as I expected.
How was your experience with it?
Accurate and stable tightening and loosening.
Although the handles are plating instead of rubber, they are less susceptible to deterioration than rubber, so durability can be expected.
[Points to note]
The switching is no problem, and it can be changed from Snap to Snap, which is totally different from cheap ones. It can be used without any problem even if it is applied in a slightly large Torque.
How did it compare to other products?
I have only used cheap ones so this may not be helpful, but I wish I had purchased it earlier as it has enabled me to install and maintain Parts accurately and consistently.
KTC is the best. It is so good that it makes me think of replacing other tools with KTC little by little.
View detail
Moderately useful Ratchet
[How is it used?
Used for installation of purchased parts and simple maintenance
How was your experience with it?
I like the Small TypeHead Ratchet because it makes it easy to access tight spaces, which is often the case when messing around with motorcycles.
Furthermore, the handle is made of resin, so even if you accidentally hit the body of the car when you turn it quickly with the Head, it will not be damaged thanks to the resin, which is a very high point.
Socket is also push-locked and smooth with 72 GEAR
Cost performance is quite good.
How did it compare to other products?
I also have KTC, Tone, and Koken Ratchet.
SK11 is by far the smallest in terms of head compactness.
I don't think it can handle LargeTorque, but for light maintenance, this is sufficient.
[Points to note]
Unlike KTCetc., it is not overhaulable, so if it breaks, you have to discard it.
I'm sure you will be able to find a new one. I guess the good thing is that it is inexpensive and can be replaced without hesitation.
Buy one as it is easy to use as a miscellaneous tool.
It is easy to use, and I am sure it will become the number one in use.
View detail
Small, Compact
I wanted a compact, small-sized product that could be used as an in-vehicle tool, so I purchased this one.
It is quite small. Large enough not to get in the way, tough to apply strong force, but usable enough.
It is a useful tool, although it is difficult to convert the tightening direction due to its small size. The selling price is a little high, though.
View detail
add to
UTube video uploaded. View detail
First time at Shivuichi
type of sushi with a single tile discarded on the bottom (now called a "shibuichi") (1/4) I have never used the "Ratchet Driver", but I would like to use it as a Ratchet Driver.
Purchase
I found that Size is surprisingly useful for parts that do not require much Torque or when you want to turn quickly.
GEAR is solid and push release type.
This price is a great cosmetic.
View detail
First Nepros
When I used to do Service, I had MirrorTool, which is KTC's top Brand.
I think it is positioned as a MirrorTool, so to speak.
The quality of the product is like a stone.
Personally, I prefer the stiffness of Ratchet to Snap on.
Handlebar is heavy.
I am not sure it is suitable for quick turnaround.
This weight is good for the easy-to-work-with Torque, but when working on the underside of the car or looking up, it is best to use this weight.
I think this weight will be Neck.
View detail
You could have at least one.
I thought that all Ratchet Handlebars are not that great, but KTC's Ratchet moves smoothly.
I would say it has more of a muffled or muffled feeling.
I bought it because I thought the quality was worth the price and that I could have at least one in this price range, and I'm glad I did.
I knew that Home center tools are different from a good brand. (Don't mention that they are sold at Home center, too...)
View detail
Convenient
The size is very compact, making it convenient for use in confined spaces.
The construction is solid and seems to be durable, so Torque can be applied without any problems.
It is useful in tight spaces and places where angles do not work.
View detail
Handlebar feels good with 90-degrees rotation
I bought it because it can be tightened and seems to be able to be turned quickly at the clamping place.
It has replaced the ordinary Ratchet wrench and is now one of the Main tools.
About 55 Nm (Axle Shaft) is the upper Torque value I have used, but
We have been able to use the system without any problems.
I guess the fact that the handlebar turns more than 180 degrees is the selling point.
The handlebar swings in both directions even when it is straightened for fast turning, so it is difficult to turn the handlebar during fast turning.
The ratchet part can be maintained (parts are available), so it can be used for a long time.
It is good for those who are looking for a Ratchet wrench in the future.
View detail
The mighty Ratchet
If you buy it for the time being, it is the first of OKBrand, Ratchet of KTC.
The characteristics are, after all, ”unyielding”and strong”.
When it comes to Ratchet, it's Snap-Fat. If it's FOR JAPAN MODELManufacturer, k◯-Ken is a famous place.
9.It's a 5sq ratchet, 180mm in length, but it does the job well even if you're foolish enough to take on a Large Bolt/Nut, which is obviously disproportionate to its appearance.
In addition, even if you continue to use it in such an unbroken way, there is no sign of breaking, and even if it breaks, it is immortal that the repair kit is sold.
But at the cost of that fortitude.
Head is Large size.
Weight is heavy.
Overly rigid
Idle TorqueLarge finite
and is generally a Power type.
You need to be careful about the stiffness of the points, especially since the Bolt under M6 is especially easy to nudge.
Ratchet is a basic tool designed by each manufacturer with various ideas, and the price is only a pin.
For now, it can be a good recommendation for those who want to have a good ”one”there” as their first pc as a standard.
View detail
You can expect durability.
The Ratchet Handlebar is an essential part of the maintenance process for both cars and motorcycles, and combines ease of use with quality. The handlebar is well made and durable, and can be torqued up to the point of full tightness. View detail
Convenient and effective
This is a great tool for those situations where the grip is too tight. The Matte finish is high quality and durable. View detail
High quality.
The Ratchet Handlebar is easy to handle with a small grip and a fine GEAR number. It is effective even at narrow angles. Very good quality for a reasonable price. View detail
Large eyes to remove Nut.
Ratchet is a little large fine-grained size to worry about the damage.
It is used for Nut loosening of
This is handy to have.
View detail
Overpriced and effective
There is a place where I do not know how durability is, but it seems that it is better to avoid too strong Torque. However, if there is one, it is convenient for something because there is performance and the effect of more than the price in Ratchet that can be used easily in many active scenes. View detail
It is effective in a narrow space.
The GEAR number is a fine setting, so you can turn it with just your fingertips, and the efficiency of work will be very high. It seems to be able to use it for a long time if it is used for a large thing with a sense of luxury. View detail
Grip is easy to grip.
The grip with non-slip surface makes it easy to remove clips such as DoorLining, etc. Since it is a special tool for removing clips, it is convenient to remove the clips left on the panel without breaking. View detail
Excellent stuff.
[How is it used?
Currently in use.
Was the one you received as per Image?
As per Image.
How was your experience with it?
This tool is a combination of Swivel, Ratchet and Spinner with a long handlebar for high torque. The long handlebar makes it possible to apply a high torque, and the ratchet is surprisingly fine, so it is very convenient for use in tight spaces.
For example, it is frustrating to use the Spinner to loosen a bolt that has been coated with an anti-loosening material such as Bar End, because you can't turn it by hand, but this tool frees you from that frustration.
The rotation switch is the same as Right rotation by turning SelectorRight and Left rotation by turning Left, so it's easy to understand.
The only disappointing part is that the Selector is getting a little rusty.
[Points to note]
The ability to apply high Torque is appealing, but if you overload the Ratchet GEAR too much, it will break, so it's not suitable for unusual uses such as stepping on it with your foot or using an iron pipe.
How did it compare to other products?
There was no similar product, so I chose this one.
Other items that would be helpful
Opinion and request to Manufacturer:I don't know how much Torque it can withstand, so I would like to see the Torque load capacity listed.
View detail
Ideal for working in tight spaces.
The size is very compact, but the construction is solid and durable, so Torque can be applied without any problems. It is a product that is easy to use even in the place where it is easy to use it for the work only with the fingertip in a narrow place and the angle is not effective without a problem. View detail
Works in tight spaces
It doesn't play a big role in Motorcycle maintenance, but it is quite useful in car maintenance.
If you turn the Grip, the Socket turns, so you can use it where there is no room to return the bar.
It's too heavy and GEAR hard to use as a regular Ratchet.
View detail