Reviews
KTC is a safe bet.
9.I have been using a 5sq. 25?Spinner Handlebar, but I have a Bolt that I can't seem to loosen, so I bought this 40?Spinner Handlebar in 12.7sq.
This is a high quality tool with a Smooth grip, easy to apply force, and no rattle in the docket area.
It's a bit expensive compared to other manufacturers, but considering that it's a tool that will last almost a lifetime, I'd choose KTC for the price difference of about $1,000.
If you're wondering what to do with the tool to loosen the Axle Shaft on your big bike, you can't go wrong with the Handlebar.
View detail
A definite product.
The quality is very good and the performance is perfect. It does a great job of loosening and tightening the well with the fine GEAR, even when there is no angle. I think it is the tool I use most often with a 9.5 slot. View detail
It's cheap and convenient.
It is a very useful and convenient tool that you must have if you have an air compressor. View detail
Required for special vehicles.
The Axle Nut can only be removed by turning the rear wheel of AGUSTA with this spinner handle with great force.
I tried it with a short-handled Handlebar at first, but it didn't freak me out.
It's a necessity for those who remove the rear wheel.
View detail
This is my favorite tool.
A 1/4 Ratchet with a bent neck and adjustable angle for easy access to a variety of screws. It works great as a portable tool! View detail
This is my favorite tool.
I bought it for off-road touring and I love it because the size is small enough to fit in my Fanny pack and it doesn't get in the way. View detail
KTC for peace of mind
When you buy from We-Big, you'll get a discount and points back
I got a great deal on it I use it at work and it's a good product
With this, you can do a whole range of maintenance work
View detail
I like the stretching feature!
I bought it as a maintenance tool
It works well enough as a Ratchet, but it has a telescoping feature that allows you to adapt it to situations where you need to exert yourself It can be used properly by stretching it out
I was satisfied
View detail
Flailing Torque is light
It is a 1/2 size Ratchet Handlebar
There's not much to do in the maintenance of a Motorcycle, but
There are occasional opportunities to loosen up the Axle and so on
It is convenient to have
Ko-Ken's Ratchet is good but the flailing Torque is light
A small number of GEAR is a drawback
There are a lot of situations where Ratchet can swing Large in 1/2 Size
You don't have to be a mainstream GEAR to use it these days
It is robust enough that it is not likely to be broken even if you hang a large torque on it because of the small number of GEAR measure
And Ko-Ken's unique Knurl process with a slippery handle that was cut into a groove seems to be a favorite But it's so great that I think it's the only one that fits
View detail
Easy to use
Purchased for de-installation and removal of the large-textured Hexagon Bolt
The Grip was easy to grip and remove the hard Bolt with ease
I feel that it is a little heavy, but if there is 1 pc, it seems to be convenient afterwards
View detail
Good
I usually use KTC for the main part of the machine, but it is used in the back of the motorcycle and in relation to the interior of the car
I bought the Nepros because I thought the 4 degree feed angle would work in my favor
When I got the actual product in the cosmetic box, I was so beautiful that I didn't want to use it for work
I enjoy the Ratchet's ka-chica-chi sound by looking and touching it while drinking
View detail
Very easy to use!
Nut that takes a certain amount of torque
(The goal was Axle Nut.) after loosening the
The role of the T Type Handlebar is very easy to work with
The fixed grooves on the ends are also easy to use
I ordered the Size as an Image
I loved the comfort and the feeling of being able to hold it in place at the edges!
View detail
Large Easy to use
Familiar with Size being appropriate. It is reliable use feeling. It's safe because Socket will not fall. I am loading in Box in Motorcycle. View detail
Easy to use
As expected it is easy to use koken.
Balance with price is also good, it is a quality that can be relieved.
Because Head does not become obstructive and disturbing like Ratchet Handlebar,
Spinner handle is useful for Quick work.
View detail
What is Homsen product is the difference of muddy
Ratchet purchased at Homsen was broken, so why
I chose KTC, the leading Manufacturer item.
Excellent usability.
Attachment exchange is possible with One push and movement is completely different.
It is a product that I think that it was good to buy a bit, although the price stretched.
View detail
The tool is KTC
Double-end Wrench can not be used for Chain subtraction of MT-07.
I bought a tool to take the trouble for drawing Chain.
Since I have bought KTC's tools from long ago, I have not hesitated.
Length is moderate, easy to put in force.
Chain subscription "Only" I bought it for, but the feeling of use is satisfactory.
Rather than loosing in Double-end Wrench, this method may be OK with only One Side OK.
View detail
First-class Brand of trust
I am a beginner at Motorcycle. In buying a tool "Because I will buy anything good, I will buy cheap ones now" I thought that.
But after purchasing a cheap article, I realized that I had better not waste Gold better if I bought a good one from the start, rather than buying a good one, I bought a trusted ktc.
As a result, I felt that I would definitely buy it.
There is luxury, it is a very nice item with no rattling of Socket.
View detail
It is a Spinner Handle of 1/2-inch angle corresponding to the place used by high torque rather than 3/8-inch angle which is a general Socket size as a tool of a motorcycle. -- individual -- good -- everybody -- although it is a product by Cau Ke
It is a Spinner Handle of
1/2-inch angle corresponding to the place used by high torque rather than
3/8-inch angle which is a general Socket size as a tool of a motorcycle. -- individual -- good -- everybody -- although it is a product by Cau Ken, it is an agreeable impression which the Socket-joint portion at the tip of
moves with a Snap.although the photograph is in the state equipped with the Socket for Bolts with a big width across flat used for a car body --
-- it turns also around the Bolt which adhered to firmly snappily.Only by
, however this, if work is impossible and a 1/2-inch angle Socket is not newly purchased, it is die length as seen with the
photograph, and will be a literal useless thing.
View detail
also saying a size exactly -- it is -- it is carrying out heavily and there is also satisfaction as a tool -- it is a recommended tool at a Motorcycle Maintenance -- it can be used for an Oil-drain & Filter.I would like to use a good thing wit
also saying a size exactly -- it is -- it is carrying out heavily and there is also satisfaction as a
tool -- it is a recommended tool at a Motorcycle Maintenance
-- it can be used for an Oil-drain & Filter
.I would like to use a good thing with attachment for a long time.
View detail
Although it thought that the cheap article of a Home center was enough, since there was a casual income, he bought it drastically. Does it say [ what ]? It is easy-to-use.Touch whether it adapts itself to the hand, and whether it puts or.The M
Although it thought that the cheap article of a Home center was enough, since there was a casual income, he bought it drastically.
Does it say [ what ]? It is easy-to-use.Touch whether it adapts itself to the
hand, and whether it puts or.The
Maintenance is becoming pleasant.
View detail