Reviews
For CRF250L front axle
Purchased to loosen the front axle of CRF250L.
Although 14mm Hex is not a tool that is used very often, I purchased a solid tool because Off cars often have a lot of suspension modifications and there are opportunities to remove/attach Wheels.
The insert is 1/2, so you need to be careful only there, but it is a stable SIGNET and satisfactory tool.
View detail
Used with Axle Nut
No problems with this product. I use it with Axle Nut on my off-road motorcycle.
For a moment I thought about substituting Pliers, etc., but then I thought, well, I'll just buy it and add another Socket! (Lol)
SIGNET is a Brand that I trust, so I chose them first based on cosmetics. The performance is also fine.
View detail
For removal of Stem Nut
I bought this for removing the Stem Nut when replacing the Top Bridge on my GSX1300R HAYABUSA.
It works fine, and it costs about 2000 yen if you buy it at Home center, so this one is cheaper.
Info:(Japanese only)
GSX1300R HAYABUSAStem Nut tightening Torque:90N
View detail
Cheap but good
The air gun is powerful and has a good volume of air emission. View detail
Not in Tools Set!
Ducati 900SS needs 11mm for brake fluid replacement with brembo caliper.
When I put Glasses on it to replace it, I found it was too loose with 12mm, and it didn't bite with 10mm... I didn't think it would work with 11mm...?
I didn't have 11mm in my tool box, so I hurriedly snapped up SIGNET's Combination wrench 11mm.
I received the product and immediately replaced the fluid, but it was an exact 11mm. 11mm may not be used very often, but you need a tool.
View detail
I needed it for RamMount.
I was in a hurry to buy this Screw when I tried to install Ram Mount. I had no idea it was Inch. I chose this one in millimeter because I would never use Inch Screw in the future.
I have to look at everyone's Review properly before I buy.
They turned the Screw of Inch well.
View detail
Very easy to use socket holder
Mounted on Tool wagon which I always use in Garage.
Magnet will stick firmly to the steel plate.
Until now, it was necessary to use both hands to remove the Socket from the Holder, but the Magnet is so powerful that the Socket can now be removed with one hand.
I don't feel very Stress when I do maintenance and my work efficiency has improved.
I highly recommend it.
View detail
Mine's an older model that's not Twisted, but it's good!
Considering the total of price, accuracy, and appearance, SIGNET tools are
I think it's wonderfully Balanced!
People who like tools too much, when it comes to Snap on, Mac, etc.
I think, Sunday mechanic is necessary and sufficient.
Hex sticking is rattle-free and Plating is Beauty.
This is good for now (laughs).
As you can see, with cheap tools from Home center, there is no denying the possibility of licking, so I thought it would be better to buy a Hex with this precision!
Cowl, footpeg, and Motorcycle have a lot of Hex.
I think there is no harm in buying a good one there.
HexBolt with deep inserts is lick-free
The shallow insertion of the nabe type is suspicious when Torque is hung…
Is it because of the shape of Bolt? I think so.
View detail
signet: -- SIGNET:1/4DR 1/4x3/8 socket-adapter product number: -- 11510 description of item [ ] -- [ -- size: -- overall-length: -- the outside diameter ] -- [ -- concave -- the socket of 3/8DR, etc. by the ratchet handle of 1/4DRx convex 3/8DR:26mm:11phi
signet: -- SIGNET:1/4DR 1/4x3/8 socket-adapter product number: -- 11510 description of item [ ] -- [ -- size: -- overall-length: -- the outside diameter ] -- [ -- concave -- the socket of 3/8DR, etc. by the ratchet handle of 1/4DRx convex 3/8DR:26mm:11phimm] 1/4DR, etc.
When using it .
View detail
Easy to use
It is a very effective tool in tight places where Straight cannot reach the tool.
The joint also moves well to reach the target point and loosen the bolt&nut.
View detail
Quantity:2nd pc SwivelRatchet
I had a Wera Swivel for the first time, but it was kind of hard to use, so I soon put it in storage.
Long after that, I bought this one.
I was attracted by the 100 GEAR and the cosmetics.
The Ratchet is a little stiff, but if you don't stand it up and turn it fast, it doesn't bother you.
It is hard to stand up, so it tires easily. (Laughs)
I was hesitant to purchase the Grip because of its poor design in the photo, but I actually used it.
The grips are excellent, and are very good because they are non-slip and do not require a strong grip to apply force.
I think it's not as long as Long, but even with this length, you can easily remove a bolt that has a lot of torque on it.
It is well made and seems to be durable.
I think the costa rica is the best.
View detail
Easy to use
It can be used for various clips, so just having one PC is good because of its universal nature.
The tip is long and thin, making it easy to reach and work in tight spaces.
View detail
having a wide range of protection
The surface is mirrored for a high-end appearance.
The surface contact type ensures that the torque is firmly applied and does not damage the bolt nut.
View detail
Easy to use
The plating has a luxurious feel and the Socket is easy to use.
The surface contact type allows for firm torque application without damaging the bolt or nut.
The Socket itself is also very strong, so I don't think it will crack.
View detail
Easy to use
The rubber grip keeps my hands cool and is easy to use.
The handlebar is also very smooth with a fine GEAR number in an easy-to-hold Grip.
The quality is very good for a reasonable price.
View detail
Convenient to have
Very convenient with access to Bolt in a tight spot.
It is useful in places where hands can fit but not long tools.
Combination wrench so it can be used in different ways.
View detail
Easy to use
This is a Ratchet Handlebar of just the right quality to do maintenance.
Balance of price, ease of use and quality is good.
Surprisingly carefully crafted, it is strong and durable.
It will last a long time.
View detail
Convenient
It can be used to turn screws, etc., that cannot be turned with a regular Phillips screwdriver by using the back hand.
It is useful and convenient to have one.
View detail
Stable SIGNET
Since it is SIGNET, quality is not a problem.
Magnet is attached to prevent parts from falling off for convenience.
The quality of the plating is good and beautiful.
View detail
Kantan, even for my clumsy self.
Almost the lowest price among wire twisters, except for those made in China.
I was anxious to do Wiring for Grip for the first time.
I practiced twice with the old Grip, and when I got to the show, I was able to do it very kang tan, even though I am clumsy.
It is a good tool.
View detail