Reviews
Plug replacement for SCUB
When replacing the plug of a SUCUB, I purchased Emon's plug wrench (16mm) because the plug replacement is too large to be done with an in-vehicle tool. The plug position of the SCUB is narrow and the plug is deep into the car, so it is difficult to work on the plug. The plug was replaced with a Standard Plug BP5HA NGK (CR7EK 7546). View detail
DriveRecorder - A must-have for installation
I used it to install a DriveRecorder in my car.
I have installed several DriveRecorder units in the past, but most of them were powered by Cigar lighter sockets.
I was worried about whether it was just taking 12V, or whether it was bucking the voltage, etc. So I thought, why not just add a Cigar lighter itself and take it from there?
One of the most exciting things about this product is that it comes with three take-out Fuses. (I will use one of them).
The FuseCase is equipped with a normal flat type, a low profile type, and a MINI flat type, so if you want to make a branch wiring from the Fuse box, you can turn it from other types of wiring. (However, since the end of the branch wiring is attached to the Pipe Type Fuse, it is necessary to prepare the Fuse, FuseCase, and wiring for the end of the Fuse, or to cut the Fuse Gold and make it into a Bullet Terminal. (In this case, if the polarity of the fuse is wrong, the wiring will be directly connected without fuse.)
It is not waterproof construction, so care should be taken when using it for Motorcycle.
View detail
In the Filter of Rokdabo.
[How is it used?
Used to replace Oil Filter in late cbr600rr pc40
Was the one you received as per Image?
As shown in the Image. It worked normally.
How was your experience with it?
The position of the Filter on the Rokudabo was difficult to work with, but it did its job well as a Filter wrench.
[Points to note]
The direction of rotation can only be in one line.
View detail
Easy to use
It is not a good idea to install an ETC or DriveRecorder in the Cigar Lighter, because the wiring is not visible and it looks ugly.
We installed this product.
Power is taken from the fuse box, so a Cigar socket is placed in a hidden place.:Set will hide Wiring.
View detail
Convenient
Convenient for power supply of DriveRecorder.
Since Wiring is fully visible when directly inserted into Cigar lighter, using this product will make it look SMART.
The power supply is out of sight, so it is good that there is a locking mechanism to prevent the Socket from disconnecting.
View detail
Convenient
Even if you don't have a Wrench that fits, this product will hold and loosen any size Oil Filter.
It is very convenient to have one because it can be used with a wide range of Oil Filter sizes.
View detail
Easy to use
I used the Power Supply Socket to power electrical components.
Performance is good and reliable.
View detail
Mainly for Vehicle
I use it mainly in my car because space is often limited for use on a motorcycle. I bought it just in case I accidentally hit the tool on the body while loosening the battery bolt. View detail
Motorcycle and car dual use
The Size is 19mm17mm21mm, and it is easy to apply force and convenient. I was able to loosen Bolt which is hard and not loose.
I think it is a good product to buy if you plan to use it for your car as well because you can use it for Tire replacement of your car.
View detail
It can be used for various Size.
It can hold and loosen the Oil Filter tightly by inserting the Ratchet wrench. It is very useful to have one because it can correspond to a wide range of size Oil Filter. View detail
The locking mechanism is secure.
I used the Power Supply Socket to use Other Brand Product's LED Tape for the Curtesy Lamp in my car. With the Emon Power Supply Socket, you can plug the socket anywhere you want. With Emon's Power Supply Socket, you can plug the socket anywhere you want and the locking mechanism keeps it safe and secure. View detail
For DriveRecorder.
I used this for the power supply of my DriveRecorder because it looks bad if you plug it directly into the Cigar lighter. It's a great way to refreshing the wiring of the DriveRecorder. View detail
To install the DriveRecorder
It's not a good idea to plug the Drive Recorder into a standard Cigar lighter as it will make the wiring visible and unsightly, you'll need to get the power supply out of the Fuse box and put the Cigar socket out of sight.:If you set it, you can hide the wiring and handle it freely, so it is convenient. View detail
Useless...
I put it on to power the Cigar socket in my car....
The result was an expected haGap.
[Was there anything that disappointed you?
This product is on the female side, and the other ornaments are on the male side, but the feel is too loose when you insert it. It was too loose to touch and was not useful.
Do you have any wishes or improvements you would like to make for the Manufacturer?
There are a number of Siga-Soke power supplies, but they should be standardized.
Please make a product that you can get into exactly ….
What made you decide to buy?
That it came with Harness to get the power from Fuse.
This was a nice point as I could easily get power from the Fuse box.
How was your experience with it?
As mentioned above, I discarded it right away because it had poor contact and would restart due to vibration.
Was the installation difficult?
As mentioned above, it comes with Harness, which gains + power from Fuse, so installation was very easy.
【Please tell me the installation point and hang】
It's a good, inexpensive product if it's in a vehicle or location that doesn't get much vibration and it works well with the MaleSocket.
[Included Parts:were they on?
I liked the fact that it comes with a Harness that gains power from the Fuse.
View detail
It's convenient to use with Universal.
You can use it for most size oil filters because it bites into the well to remove the engine oil filter. If you have a hard time loosening the filter, we recommend you to use the filter wrench to loosen it. View detail
It does not work with the MT-25's OEMFilter
Model number; 5GH-13440-61 does not work with the Filter
The Wrench endorsement states Not all models are available It is
It's not a lie and it's not a choice
I didn't do enough research
The diameter used appears to fit with φ55mm
But the engagement is not right
I used it and it transformed the Filter beautifully
I'm glad I noticed the hole before it opened up
So, you can't recommend it
You should do your research before you buy a tool
View detail
Very good
It is excellent.. Drive Recorder, Radar Detector etc. Power can be taken from the Cigar socket Easy power supply from the fuse box to install Type electrical components. And without processing. View detail
It was a very useful item.
I bought it to install DriveRecorder, but it was very easy to take power from Fuse part and connect Cigarlet Socket.
CigaretteSocket can also be fixed so I think that it is one of the advantages that there is no worry of loosening even when it is fixed to the back of the Panel.
View detail
For ZrXSeries Plug exchange.
I used it for Plug exchange of ZrX 1200 daeg.
Length was just right and I was able to do work comfortably.
The Socket section is also solidly attached with prevention of dropping of the plug.
View detail
The Socket department is universal.
At first I used the Standard Type Plug wrench, but because the Handlebar part was short and hit the Motorcycle Handlebar, it was very hard to use, so I came to find this for the long Type of Handlebar part. In this case, the T type part comes out above the Handlebar of Motorcycle, so we could turn the plug.
View detail