Reviews
Tools used only occasionally are SK11
I use basic KTC and Tone for tools.
I use SK11 for tools that are used only occasionally.
Insert angle of this Deep socket:6.35mm (1/4Inch) Purchase
Sprocket Coveretc.It is necessary to remove the bolt that is deep in the bolt, and it is necessary to remove the bolt that is deep in the bolt.
Frequently used insertion angle:9.5mm (3/8Inch) Deep socket in the
If you try to use the 8mm, the Ratchet Pouch opening will be
It's thicker, so it hits the Cover.
So, insertion angle:6.35mm (1/4Inch) will be needed
But I don't use KTCetc. so I don't want to buy KTCetc. for my Wallet...
Thank goodness for SK11's Socket
Reliable quality at a reasonable price
I use KTC and Tone where I hang Large Torque.
The parts of SmallTorque that are not used much are supplemented with SK11.
View detail
Normal for a Ratchet.
For some reason I didn't have a Ratchet in this shape, so I bought one.
Those who want to turn the machine in fine steps in a deft manner may find it a little lacking.
View detail
RokudaboPlug replacement
[How is it used?
Purchased with Plug as it is needed to replace Plug in CBR600RR PC40.
Was the one you received as per Image?
The quality of the plug wrench is good and the magnet in the plug wrench makes it easy to catch the plug.
How was your experience with it?
As a plug wrench, it does its job well and is highly rated for its texture.
However, since this was my first time replacing a 4-cylinder plug, I struggled with replacing #2 and #3 and eventually gave up and asked Motorcycle shop to do it for me.
We were told that a less thicker plug wrench would be more suitable.
I don't know if I will have to come back to it in the future, but it was good as a Plug wrenchSingle Body.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Used for Torque management of brake hose banjo adapter tightening
Aluminum banjo to avoid cracking and splitting due to over-tightening.
Wobble is minimal and the feel is good.
There are not that many scenes used, but since the price is Reasonable, I don't think it's a problem.
Note that the mounting orientation on the Torque wrench needs to be corrected, so we recommend referring to the WrenchManufacturer's usage instructions.
View detail
This is a useful tool that one should have at home!
[How is it used?
I had been using a cheap Ratchet Handlebar, but it started behaving suspiciously, so I bought a new one.
Was the one you received as per Image?
KTC is a quintessential KTC company. It has a solid weight, stable operation, and I could tell immediately that it is of high quality. The tool is just as I expected.
How was your experience with it?
Accurate and stable tightening and loosening.
Although the handles are plating instead of rubber, they are less susceptible to deterioration than rubber, so durability can be expected.
[Points to note]
The switching is no problem, and it can be changed from Snap to Snap, which is totally different from cheap ones. It can be used without any problem even if it is applied in a slightly large Torque.
How did it compare to other products?
I have only used cheap ones so this may not be helpful, but I wish I had purchased it earlier as it has enabled me to install and maintain Parts accurately and consistently.
KTC is the best. It is so good that it makes me think of replacing other tools with KTC little by little.
View detail
good
There is no space between the top Right edge and the bottom Left edge, so you can't remove that Large size, but it was comfortable to touch and the Large size was reasonable, so it was easy to use. View detail
Rubberized to prevent falling off
The Spark plug is held in place by a rubber inside to prevent it from falling out.
Well, I have no problem with on-board tools, but I want to manage Torque, so I bought a Plug socket.
View detail
Fits: SUZUKI SKYWAVE650 burgmanLX, SUZUKI DL1000 V-STROM650X, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM650, SUZUKI GSX1300 HAYABUSA, SUZUKI V STROM 650, SUZUKI V STROM 1050
DL1000 V-STROM250 for initial Oil replacement and Oil Filterfor replacement.
I purchased this for the first Oil replacement and Oil Filterfor replacement of DL1000 V-STROM250.
I was able to replace the Oil Filter without any problems.
The Bolt hole in the middle makes it easy to remove the Oil Filter.
View detail
Double nut or Shift rod.
I bought it to use for double nut and shift rod.
It is 3mm, or about half the thickness of KTC's 6.5mm on hand.
The angle is 75°, which is not so common, so it is easy to hang even if Arm and Shift rod overlap.
Although there is a problem of strength, it would have been better if the jaws had been made a little smaller, as I don't think that high Torque will be applied to thin-lipped products.
View detail
A must have tool for any tool box.
This tool comes in handy for all my little jobs and some big ones.The depth of insertion of the socket allows the optional setting of fixed and pivoting.it can be used as an extension bar.It is pretty sturdy and well made.The Japanese quality shines through, the feel in the hand is incredible. It's quick to use the handle is large enough to get a good amount of torque on the screw or nut being tightened. so far the tool has been very durable and not let me down while being used. View detail
Light and strong Tool
Expensive, but very light for carrying on rides. Easily put into a tool pack.Easy to adjust, very sturdy. A nice tool. more uses for these tools than just motorcycle riding.It serves two purposes, amateur and professional. It should be in your tool bag.Highly recommened View detail
Great tool, highly recommend
This way is much more precise. Works like a dream. Bought this tool for removing the small KTM Bendix bushings. It worked perfectly. Great tool for the price, was able to remove all of my bearings from my transmission in my KTM plan to rebuild my KTM with it as well, didn't have an issue with any of the small sizes, you just have to be sure that you are setting it up properly. Note that you'll need up to a 26 mm wrench or a crescent wrench. Seemed a little pricey for a tool you do not use that much but it will serve generations of riders in the family. Tips: Don't forget to grease the sockets, center them exactly and tighten them. View detail
I don't use Size very often.
I rarely have a chance to use a 27mm Combination wrench, but I bought a SIGNET wrench with a good balance of price and quality, thinking it would be used occasionally for suppressing Kashimaru-kun's Holder and for Axle Shaft of Big bike.
It is indeed a powerful Size.
View detail
For Ratchet driver
It is for Impact Driver, but I bought it for Ratchet Driver.
The length is just right and it is inexpensive, so it is very useful.
There is also a half-length No. 3, but I regret that I should have chosen the longer one.
View detail
If used gently, it will last somewhat longer.
[How is it used?
It is used during Tire replacement &Puncture repair work on Dual Par Pass cars.
Many Dual PurPass vehicles that enjoy mountain play and forest roads use a Tube in the Tire, so these Items are very useful for getting the Valve of the Tube out of the Valve hole in the Rim.
Wire is thin, so be careful when working with it, as the handle clasp can easily come off or the wire can easily break if pulled with force.
Did you receive the item as per the Image?
I used to use a similar product from another manufacturer, but it was used roughly and broke, so I bought this product, which was a little cheaper at Webike at the time.
The product was as per the Image.
How did you like it?
Once you get the hang of it, you can easily pull out the Air Valve in no time at all.
Especially in winter, when tires become hard, I can't do without this product.
[Points to note]
As I wrote above and others have written. "Forced to pull by brute force." The product is fragile when you try to pull it out.
Although Manufacturer is different, if you search for DRCAir Valve Puller in the product introduction section of Webike, you will find a video at the bottom left of the introduction section that explains it in an easy-to-understand manner. If you are not sure how to use it, please refer to the video on YouTube.
How did it compare to other products?
I used to use DRC's Air Valve Puller before this product, and my personal impression is that it was easier to use DRC's Air Valve Puller because the Wire tends to rotate when Screw-tightening the Valve. (Possible individual differences) 。
Other items that would be helpful
Point and hang of installation
With your free hand, press lightly on the backside of the valve of the tube toward the rim while guiding the tube.
The rest, as I mentioned above, you can watch the video.
Basics We're not in a hurry. We're going to do our job well and reliably." is the best shortcut.
[ITEMS TO BUY TOGETHER
Prepare Lever, BEETWax, Inflatoretc. for Tire removal and attachment separately from the things to be replaced.
[Opinions and requests to Manufacturer
It would be nice if you could use a stronger wire to ensure durability, but we would be grateful if you could just keep this product in the lineup.
View detail
portable
It is not something I use often, but I carry it in my first aid bag for touring.:I think it is cheap at 1 Set of 2pcs. View detail
One for the toolbox
I used to use a valve cap that I thought was made by for Motorcycle. I used to use one that seemed to be from for Motorcycle, but I lost it because it was small like the Valve cap, so I bought the Valve Core Spinning from DAYTONA. I lost it and bought Valve Core Spinning by DAYTONA this time. It is also very easy to turn because it is just the right size. View detail
Hammer for punching
[How is it used?
I was looking for a large hammer because I had only a small hammer to smash during maintenance, and a large hammer is also a small hammer.
Anyway, I bought it because it was big and looked sturdy.
Was the one you received as per Image?
It has a reasonably Limit weight to support with one hand.
It was quite ideal.
How was your experience with it?
It is useful in many ways, such as tapping the Shaft and Shock driver.
I have been handling it roughly, but so far there has been no damage.
The grip of the handle is also good so it does not fly away.
[Points to note]
It has a reasonable Size feel to it, so it is difficult to store.
Also, since considerable force is applied to the parts, there is a possibility that the parts may be destroyed if the work is done in a frustrated manner.
How did it compare to other products?
The power is different than the chubby Hammer I had on hand.
【Review】
This tool is unnecessary if you just want to maintain your Motorcycle normally.
It can be used to pull out rusted or stuck shafts on immobile or abandoned vehicles.
View detail
I don't want to put a scratch in it.
It is used to remove parts that are hard to install or adhered to in places where you do not want to scratch.
Size:#1, 1 PondLength, HeadLargeThickness and weight seem to be the most convenient.
The cost is easy, and the head can be exchanged, so if you have 1pc. you can use it in various ways.
View detail
Valve clearance adjustment
Used for JA55 Valve clearance adjustment.
I have not used other products so I can't compare, but the EX and IN sides were easy to work with.
View detail