Reviews
I will never buy from them again.
I used it to disassemble the front fork of a scooter, but the tip broke off immediately. In the end, I used a thousand pieces of the same piece in a quantity of 1,000.:I bought 2pcs and managed to remove the C-ring. View detail
If used gently, it will last somewhat longer.
[How is it used?
It is used during Tire replacement &Puncture repair work on Dual Par Pass cars.
Many Dual PurPass vehicles that enjoy mountain play and forest roads use a Tube in the Tire, so these Items are very useful for getting the Valve of the Tube out of the Valve hole in the Rim.
Wire is thin, so be careful when working with it, as the handle clasp can easily come off or the wire can easily break if pulled with force.
Did you receive the item as per the Image?
I used to use a similar product from another manufacturer, but it was used roughly and broke, so I bought this product, which was a little cheaper at Webike at the time.
The product was as per the Image.
How did you like it?
Once you get the hang of it, you can easily pull out the Air Valve in no time at all.
Especially in winter, when tires become hard, I can't do without this product.
[Points to note]
As I wrote above and others have written. "Forced to pull by brute force." The product is fragile when you try to pull it out.
Although Manufacturer is different, if you search for DRCAir Valve Puller in the product introduction section of Webike, you will find a video at the bottom left of the introduction section that explains it in an easy-to-understand manner. If you are not sure how to use it, please refer to the video on YouTube.
How did it compare to other products?
I used to use DRC's Air Valve Puller before this product, and my personal impression is that it was easier to use DRC's Air Valve Puller because the Wire tends to rotate when Screw-tightening the Valve. (Possible individual differences) 。
Other items that would be helpful
Point and hang of installation
With your free hand, press lightly on the backside of the valve of the tube toward the rim while guiding the tube.
The rest, as I mentioned above, you can watch the video.
Basics We're not in a hurry. We're going to do our job well and reliably." is the best shortcut.
[ITEMS TO BUY TOGETHER
Prepare Lever, BEETWax, Inflatoretc. for Tire removal and attachment separately from the things to be replaced.
[Opinions and requests to Manufacturer
It would be nice if you could use a stronger wire to ensure durability, but we would be grateful if you could just keep this product in the lineup.
View detail
I can use it
I recommend it because it is easy to use. View detail
Great value - Must have for blind bearings
A must-have for double-blind bearings that you need to remove for engine overhaul.It worked great in the blind transmission bearing. It didn't work for some jammed swing bearings, but the collet kept its grip until the bearing seat began to twist. It's not the fault of the tool, it's a testament to how tight these races are.When your bearings need replacing, this bearing remover hits the bearing so evenly that it takes very little effort to use. I would use brass rods and hammer around the bed to get it out and sometimes that just wouldn't work. But that means you slide, compress, and quickly shift the weight up to push the mattress out. This is one of my most appreciated tools. And the protools price surpasses other competing products that appear to be of similar quality. I had no issues with this tool. It probably even works on my bike beds. View detail
Professional tool wire twister
It is a good Tool that is very easy to use.
The only drawback is that it requires a strong grip to lock the Wire in place. It would be great if it were easier to lock.
View detail
Quantity:Set items are a bargain!
Quantity:It is a Set item, so it is a good value.
The nails can be replaced, so they can be used in a variety of ways.
I will end up buying a dedicated product, but for now, this is what I use for Rose.
View detail
It is cheap and sufficient for use.
I used it to replace the Reinforced Clutch on my SUPER CUB 50FI AA01.
It's not something I use very often, and it's a cheap, large, and satisfying product.
View detail
I pulled the wire.
When I installed the product on the Air Valve, I grabbed the handle and pulled it, the wire came off from the Air Valve installation part and it became useless.
It broke after the first use, so it was a waste of money.
View detail
No complaints
I'm not asking for anything more.
There's nothing wrong with that
If you don't have a perfect score, I'd like to know what more you're looking for.
It's enough for your motorcycle hobby.
View detail
Wiring of the Handlebar Grip
I opted for the Manufacturer's Professional tools, which I have always bought, because all Manufacturers look the same in terms of shape despite the price difference. Made in Taiwan
It's made in Taiwan, so I was relieved to see that it was made in Taiwan.
Since the Wiring location was mainly just the Handlebar Grip, I was still turning round and round with the Pliers. When I actually used the Wire twister pliers, the work was fast and the finish was beautiful because it was a special tool.
If you don't know how to use it, it's easier to search for the video if you don't know how to use it, because it doesn't come with an instruction manual, although the working procedure is simple.
View detail
It can be used normally
I bought it because my previous one broke.
Honestly, there are a lot of products out there, but if you don't choose something too weird, you should be able to use it.
This product also works normally.
View detail
Wire got out of possession.
For exchange of Air valve, I thought that it was quicker to use the exclusive one, I tried using. The engagement with Valve and others worked well. After that, I thought that work was completed by raising Valve in the Valve hole in Wheel, and the Wire connected with Valve got out of the hole of the Gold genus that embedded the wire. The part that connects Valve and Wire is Large durable but the connection with Gold genus that pulls in the bottom is sweet, it pulled out with full power, the force can not fit in. In addition, I wanted you to raise the strength of this part and make a product that will not come out, I was dissatisfied with the overall evaluation. View detail
I used it once and it was broken
I used it once and it was broken.
When exchanging the Tire of Off-road motorcycle, if I pull lightly to pass Air valve to Wheel with this product thinking that it is convenient, the wire has come off from the possession.
It may just be that the individual I bought was bad, but I can not recommend it to others for this quality.
View detail
Necessary enough
It is cheap, but it is necessary and sufficient performance.
I do not know where I can endure full-scale use,
As a hobby Rider, it is not too much to use so far,
It is very easy if you have Ring kind installation.
View detail
It was easy to use.
I used it to set the Snap ring with Oil attached. I never slipped and it was good.
It was also possible to change the angled tip by Smooth, enough to push the Clip into a narrow place.
View detail
This is for Master cylinder disassembly!
Nisshin1 / I used it for disassembling 2 for FrontMaster cylinder. Because it is 90-degrees, the hole of the Snap ring is easy to see, the tip is long so it was easy to remove it! It is very convenient, but it is not rarely used tool, so personally I feel a bit high.. View detail
Eliminate irritation at Tire exchange
Purchased at the accumulated Point. I thought that I wanted to see a friend using it. When I actually used it I could replace the Tire quite efficiently.
This is useful because it may take quite a while to find the beginning of TubeValve when exchanging Tire. As the frequency of use is low I think there is one in the tool box and there is no loss.
View detail
Convenient with Angle Difference Attachment !!
I always used Radio pliers to detach E Ring
I have experienced losing and dropping peaking many times
I bought a special tool this time.
Usability is a good feeling. Set of angle difference of Attachment is also
It was really useful and I did Big!
Price is also cheap Recommendation!
View detail
Actually it is a bit different ...
Originally used for Clutch of Honda Mini bike, GSX-R1000 (K3 / K4) Swing arm pivot Nut.
Service manual was instructed to use special tools, which was also expensive (Surely over 5000 yen) Because it was profitable.
It is a tool to be used by connecting to Socket wrench and so on, but be careful. In ordinary Ratchet wrench you need to use Extension bar etc..
View detail
Satisfied with COSPA! Firm making.
Purchased as a disassembling tool of Clutch such as APE, CUB.
It was my first time, but I could use it without particular problems.
It is the deciding factor of purchase that the price was cheap regardless of what.
The frequency of use is also low.
I think that it is good though it appears variously.
View detail