Reviews
Ideal for Driven Sprocket Nut
I purchased the 12mm to replace the Driven Sprocket on my KLX125.
As a result, I am satisfied with Large!
If you have ever replaced the Driven Sprocket on a KLX125, you will know that when holding the Nut on the Driven Sprocket, the Neck is where the Rim/Tire is located.
LongGlasses/Spanners interfere with the Rim/Tire, so the tool must be hung on the Slant, while ShortGlasses and normal length Spanners are too short to hang the Torque.
I had been using Long spanner, but I thought it was not a good idea, so I bought this one.
Good point #1.:Moderate Offset
The handle and Glasses section are moderately offset so that the Nut can be held without interfering with the Rim/Tire.
Good point #2.:thin
Related to (1), it is made thin and does not interfere with the Rim/Tire.
Good point #3.:No counterbore in the Glasses area.
They have eliminated the counterbore, so the Nut can be held firmly even at this thinness.
Good point #4.:Simply cool
I like UNIT tools and have several of them, they are cool.
The ruggedness of the black color, the UNIT logo shining on it, and the gentleness of the handle covered with rubber.
It's a hobby of mine, but I just can't get enough of this coolness.
It is not so frequently used for personal use, but it is very useful when replacing a Driven Sprocket! It is a very useful tool when you need to replace a Driven Sprocket.
When in doubt, buy. Please try it out at Su Chest in
View detail
Expect durability
I bought this because my long-time Socket was getting a little licky. 900SS Cowl removal is 4mm, so I use it a lot. I tried it out right away and the new one chews very well indeed, no more worries about Bolt licking it. View detail
This eliminates the need to search for tools.
Rose and kept it in my toolbox. Separate from the tools for my main job,
It is stored in the Motorcycle garage. I use it by hooking it to the Neodymium Hook as shown in the picture, considering that it is easy to understand and within easy reach.
View detail
Drumstickn, Drumstickn!
I often make my own parts for ZEPHYR400 and CUB90. I often use Aluminum plate as material.
For the cutout, we used different tools depending on the thickness:Gold scissors tend to bend the object while cutting, and an iron saw tends to blur the cutting line. It took a lot of time and effort to make the final correction and polish it to make it less noticeable.
I had never seen SK-11's Hand nibbler tool in person, so I did not have an Image to use it. I had never seen a hand nibbler before, so I did not have an image of using it. I purchased it and found it easy to use, and I enjoyed cutting aluminum and steel plates. It is not like cutting with a normal scissors, but with a drumstick, a drumstick, a drumstick.
The blade is a sturdy Square Type with a thickness of approximately 6mm. The blade is clamped between the blade and the board, and the blade moves down and cuts off the board in one grip. The grip force varies depending on the material and thickness to be cut; even aluminum plates are quite tiring. It is easier to cut by gripping the blade or placing the lower side of the fixed grip against the flat surface of the worktable and pushing the working grip in with your arm strength.
I had a person with a weak grip use it; he could not cut a 1mm Aluminum board with one grip. I think it has something to do with the strength. I'm afraid that if I force myself to grip it too tight, I'll hurt my fingernails." I was told. I could use a leather hand, but it is dangerous and difficult to slip.
Because of the thickness of the blade, the cut will drop about 6mm worth of cuttings. In the case of an iron saw, it will be about 2mm worth of iron dust. It is better to use different tools considering the labor and the processing time after cutting.
The blade bite was good when new, but the blade is starting to round off a bit. It would be nice to replace or polish the blade, but since it is inexpensive, it may be a good idea to replace it.
If you want to make longer cuts, you can choose an electric saw. However, for small workpieces, SK-11's Hand nibbler is sufficient.
View detail
Only special tools can do this.
In order to revive the immobilized YamahaRZ350, I set out to overhaul it, but the Pulley remover I had on hand was not enough to get the job done. I knew the power of the special tool from my previous experience of removing a bicycle without a co-sauce, so I searched for it and found this YamahaOEM tool at a reasonable price. The feeling is that there is no rattling, and I can put a lot of power into it. However, it didn't shake, probably because it was an old motorcycle, so I applied more force with the Expander and was able to remove it safely. There was no sign of overworking the tool, and I am glad I purchased it. View detail
Easy to use
Purchased for Small TypeRatchet, cost performance is high with Holder set. Easy to use even in tight spaces. View detail
Purchased for Torque wrench
Purchased for Torque wrench. However, the Holder cracked rather easily if I didn't pinch it properly. View detail
Torque also has a Quantity:Set is convenient
I wanted a Torque set and found the other SK11Socket easy to use, so I bought this one. View detail
Maintenance
Quantity:I was contemplating the purchase of a set tool and it was on sale, so I didn't hesitate to buy it.
The glossy finish gives it a luxurious feel and the display is easy to read.
It is very useful for installation and maintenance of custom parts.
I think Spanner will be sufficient for some work.
The stop Bracket of the lid is easy to come off, so I made it functional Minus 1.
View detail
![Axle shaft sockets [4 sizes]](https://img.webike-cdn.net/catalogue/images/95068/yk022001_TS.jpg)
Necessities
Purchased for front axle shaft removal and attachment for tire replacement on GSX-R1000. It is very accurate, perfect fit, and safe to use. View detail
circling a large number of insects
This is fine as it works without any problems! View detail
It is inexpensive but also very practical!
[How is it used?
I bought this to remove the fork top bolt on my CB1100.
Was the one you received as per Image?
I was surprised to see that it was LARGER than expected.
How was your experience with it?
It works fine as a Glasses Wrench, it looks expensive because of the DAYTONA stamp, but I am satisfied with it because it is cheaper than similar tools from Home center.
[Included Parts:were they on?
Nothing else is included.
[Was there anything that disappointed you?
None in particular. Good quality, practical and good looking.
▼It is definitely better than the cheaper Home center tools. I don't know about durability yet, but I want to use it for a long time.
View detail
Simple form and easy to use
I was looking for a simple and reliable tool like an in-vehicle plug wrench from a well-known tool manufacturer, and I found this product and immediately bought it because of its low price.
The price is a bargain, but the quality is so high that it fits perfectly with the plug diameter, as you would expect from a KTC product.
The rubber inside the wrench gently holds the plug in its mouth so that there is no danger of dropping it when it is removed.
Also, the tool is available in two different thicknesses at both ends:16mm = CPlug and 20.8mm = BPlug, so it can be used with CUB and MONKEY. (CPlug) and 2-stroke VESPA (BPlug) This is more convenient for me as an owner of a
However, since it is a straight type, it may only be used on cars with a large space above the plug hole.
The L-shaped bar is also very easy to use because of its ingenuity in making it possible to use it even for car models that are difficult to get space to turn.
The simple shape makes it easy to pack, so it would be excellent as an in-vehicle or portable tool.
Durability is still unknown, so it was not rated yet.
View detail
A good tool that helps save time
I bought this socket handle again. It takes up very little space in the tool bag. I just put the sockets in my toolbox. It takes up very little space. It is very useful and ergonomic. It is very easy and fast to use.Depending on the job, this can be easier and quicker than getting a ratchet and extension. There is nothing like it in terms of design. Japanese hand tools are unique in terms of design and quality.I'm glad I have it,definitely recommended View detail
Is the length of the short method better?
I tried to make a 15-socket holder, but I didn't think about the length of the holder. I didn't think about the length of the holder, because it was about 30cm long, so I couldn't fit it in my tool box. 10-socket holders are available in the Quantity:2pc. I should have bought Set. But
It is definitely better than the Gold genus because it is made of plastic.
View detail
Poor mechanics buy toolsRose
9.The 5 tools were added in the Grip set since the number of tools has increased since the Rose purchase. The work is easy Plus No.2 Driver.
Only 1 pc.
View detail
For CRF250L front axle
Purchased to loosen the front axle of CRF250L.
Although 14mm Hex is not a tool that is used very often, I purchased a solid tool because Off cars often have a lot of suspension modifications and there are opportunities to remove/attach Wheels.
The insert is 1/2, so you need to be careful only there, but it is a stable SIGNET and satisfactory tool.
View detail
Used to remove the Clutch of LETS4Palette
When removing the clutch outer of the LETS4Palette, the nut holding the clutch outer in place was used to loosen it.
I was able to loosen a nut that did not loosen at all with the 150~180mmRatchet wrench I usually use.
Because of its long overall length, it is a convenient tool that can be used to apply large torques even by human power.
View detail
I think it is very cosy. It is carefully made.
I have been using Quantity for many years now.:The socket adapter of the set finally broke. I was looking for a replacement, and this product seemed to be the cheapest and the most well-made, so I bought it. I bought it because it seemed to be the cheapest and well-made product I could find. It fits very snugly and is easy to remove, and I think it is very cost effective.
I don't know about durability, but it looks good, so I gave it 5 stars.
View detail
Great tool set makes working on my bikes easy.
I like these wrenches.high quality, japaned made,feeling hand perfect.the cost is right and works fine They are quick and easy to use and I keep them with my tool box.The length is sufficient. It is not too long. It fits in the tool box. It is quick and easy to check tightness of almost every bolt on my bike with these while riding or servicing my bike.Wish they offered a set with 7mm and 13mm.Highly recommened. View detail