Reviews
How is the performance compared to other products when attaching and detaching?
The size fits well, but the power to bite the plug, which is the original purpose of the plug socket, seems a little weak. It's actually very loose. I may have purchased it without knowing the detailed product specifications, so I looked at the product description again, but what about it? There seems to be a lack of information about product specifications. -------------------------------------------------- -------- The size fits well, but the power to bite the plug socket is a bit weak. It's actually a very loose level. I might have purchased it without knowing the specifications of the product, so I looked at the product description again. It seems that there is a lack of information about product specifications. Powered by Google Translator View detail
honestly speaking, it's subtle
I thought it was easy to use with Pencil type and purchased it for electric inspection, but the system is not very good. View detail
Objective not met.
I purchased pcxjk05 for LowdownRear shock adjustment but the space around the Shock was too narrow to fit.
I will use it elsewhere...I wonder if there will be a time to use it.
In case you are wondering, the Wrench that came with the Mukawa Shock that I used to replace the Shock on my SUPER CUBC110 didn't fit either, so I bought this product.
View detail
Unfortunately, it did not come off.
[How is it used?
The front coverBolt on the Scooter has taken a licking.
I bought it.
Was the one you received as per Image?
They did a Screw cut that bites firmly into the Plus screw that has been licked.
How was your experience with it?
As a result, the Rusty and sticking Screws were not scared.
[Points to note]
It says to remove it by tapping it with Hammer, but be careful because tapping sometimes changes the direction of rotation.
View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R
Damage prevention?
Does it help prevent damage? I bought it with other products to try it out.
PullerBody:Just like a Spacer with Opposite Thread Screw Bolt, Nut. There is nothing like an instruction manual that comes with it.
If this doesn't work, it is a price sensitive product.
Copy, it would be nice if an instruction manual, even a simple one, is included.
View detail
Ring cannot be removed. Tool won't fit.
The tip was too thick and the hole was too narrow for the z1 Master Cylinder to get the Ring. View detail
Costa bad!
I have the one from Tone and it is convenient, so I bought it to see if there is a difference.
I bought the one from Tone for 800 yen on Amazon, but this one is about 1300 yen.
As for the quality of things, I think Tone is better. (Material is iron over there?).
This is Plastic.
It is marked every 90-degrees, so if you want to tighten angles or if you don't want to use KTC, you can buy this one.
Personally, I prefer tones as a cosmetic and object.
View detail
The equivalent device was sold at a bargain price in the home center. Although it is good since it purchased in order to float a mailing cost .. I think that it is quality.
The equivalent device was sold at a bargain price in the home center.
Although it is good since it purchased in order to float a mailing cost .. I think that it is quality.
View detail
No Recommendation for general use
FOR JAPAN MODEL MAJORBrandKTC Hex socket Quantity:Set
”You want KTC for now, right” This is the first Hex socket I've purchased.
I often see Socket as ↑ but it didn't work for me.
This is because, as the product description says ”Bit can be replaced”, the Hex part (Black part in the picture) is stopped at Screw and is replaceable.
The tip of the Hex tends to wear out in heavy youth, so I think it's reasonable that it's replaceable.
But when you use it, this screw loosen and Hex part become rattling.
If you retighten it, it will stick firmly again, but after a while, it will rattle again…
Personally, I'm not a heavy youth like the Motorcycle guys, so the Demerit that rattles more than the convenience of being able to change the tip was Large.
So now I'm using another Manufacturer's cast-in? Type Socket is used.
I'm satisfied that it doesn't rattle.
If the tip wears out, I plan to replace the entire Socket with a new one.
As mentioned above, if you're not a heavy youth, Demerit is a larger size than Demerit, so I don't think it's a good product for the general public.
View detail
Fits: DUCATI PANIGALE V4, DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 S
There is an error in the product description on Webike.
I looked for the Socket needed to remove the Large Center nut on the MVAGUSTAF3.
This product has a ProtectionRing and is thinly made so it is easy to apply Torque, 1/2-inches. (12.7mm) I bought it on Webike because it was listed as SQ so I could use it with my Wrench.
When I checked the item that arrived, it was 1/2" (12.7mm) Not, in fact, 3/4" (19.0mm) The product description on Webike is incorrect.
This meant I had to buy a Conversion Adapter, and by using the Adapter, the thinness didn't make sense either.
In fact, when I put it in the center nut, there was not much clearance and I beat it in with a platon.
It's OK that you don't have to worry about the contact surface with the wheel because of the protection ring, but it's a pity that this ring comes off soon.
As for the detachment of the center nut, it is fixed firmly, and I was able to put a large Torque without anxiety. This point is good.
Finally, when I removed the Socket, there was a Wound in the Center nut. I think it would be good if you could take a little more clearance.
View detail
Fits: HARLEY-DAVIDSON DYNA Family, HARLEY-DAVIDSON SOFTAIL Family, HARLEY-DAVIDSON TOURING Family, HARLEY-DAVIDSON SPORTSTER Family, BMW R1200GS, BMW R1250GS, BMW R1200GS Adventure, BMW R1250GS Adventure, BMW R1200RT, BMW R1250RT, BMW R1200R, BMW R1250R, BMW R1200RS, BMW R1250RS, BMW K1200S, BMW K1300S, BMW K1200R, BMW K1200R Sport, BMW K1300R, BMW K1200GT
It fits all BMWs, but...
I was looking for a wrench to replace the oil in my F900XR, but I couldn't find one that fit, so I bought this one that fits the F800 system. When I tried it, the unevenness did not fit and I could not use it.... As a result, I was able to open it by sticking the driver. I realized that it is a large thing to confirm the suitable car model. The product is safe and stable DAYTONA, so I think there is no problem. View detail
Disappointing.
I bought it for StemMaintenance of GB250, because it was correspondence Nut diameter:36-48mm.
If you try to put 3kg of force on the Stem, it will come off in the middle because the hook is too shallow.
If you have a small Torque, you can do it while holding down the Wrench with your hand. ・・・・
I'd like to make the inside radius a little larger.
View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300 SUPER FOUR SP, HONDA CB1300 SUPER BOLDOL SP, YAMAHA MT03, YAMAHA MT-07, YAMAHA MT-25, KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI VERSYS-X 250, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR
I'd love to have one of those.
No problems with the product itself.
It is difficult to understand the consistency of the body and the model number on the HP.
I would give it an overall ☆☆.
When replacing the Oil Filter, the wrench was stuck and removed Large.
View detail
Fits: SUZUKI SKYWAVE650 burgmanLX, SUZUKI DL1000 V-STROM650X, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM650, SUZUKI GSX1300 HAYABUSA, SUZUKI V STROM 650, SUZUKI V STROM 1050
I used it in my last semester's GSX1300R HAYABUSA.
I used it with the GSX1300R HAYABUSA in the last term, but it is not useful.
If you are planning to use it on the GSX1300R HAYABUSA, I strongly recommend that you do not use it.
Even if you can put this product in your motorcycle, you can't use it because the tools won't fit in the bike.
Because of the softness of the material of this product, it is easily dented.
View detail
Useless...
I put it on to power the Cigar socket in my car....
The result was an expected haGap.
[Was there anything that disappointed you?
This product is on the female side, and the other ornaments are on the male side, but the feel is too loose when you insert it. It was too loose to touch and was not useful.
Do you have any wishes or improvements you would like to make for the Manufacturer?
There are a number of Siga-Soke power supplies, but they should be standardized.
Please make a product that you can get into exactly ….
What made you decide to buy?
That it came with Harness to get the power from Fuse.
This was a nice point as I could easily get power from the Fuse box.
How was your experience with it?
As mentioned above, I discarded it right away because it had poor contact and would restart due to vibration.
Was the installation difficult?
As mentioned above, it comes with Harness, which gains + power from Fuse, so installation was very easy.
【Please tell me the installation point and hang】
It's a good, inexpensive product if it's in a vehicle or location that doesn't get much vibration and it works well with the MaleSocket.
[Included Parts:were they on?
I liked the fact that it comes with a Harness that gains power from the Fuse.
View detail
It's slippery to touch with dirty hands
I bought the product after seeing the photo, but the product was shallow in the Knurl process, unlike the attached photo 。
If there are any minor changes to the product, please replace the pictures
View detail
It was 3/4 Failure
I needed a 36mm Socket for my OHLINSFKS Top cap and ordered one
I was disappointed when I received it and noticed that the insert is 3/4 of the way through
When it comes to Motorcycle maintenance, I don't use 3/4 of it I have 1/2 of the largest in my hand
I went to the local tool store to buy a 3/4 to 1/2 conversion adapter for my trouble, and I got a 1/2 The 36mmSocket was sold for less than the conversion adapter
Read carefully before you buy
View detail
Beware of those who replace the Plug with TL125
TL125IHATOVO or later MODEL's, purchase to Plugfor Replacement I did
However, as a general comment, the Plug could not be replaced
View detail
To regrettable shopping ...
I am using the Air valve core driver of DRC, but I have purchased this thing because this thing is KTC when I am exploring what is for carrying.. I immediately tried to use it when exchanging the Tire, but it has become a product that is completely dissatisfied with having it at all. First, although it is a part of the handle to rotate, because it is wide, it makes it hard to move your hand to use with Spoke wheel. And, although it is the part turning Valve, since KTC 's thing can not turn unless Valve is pushed in, air will leak when turning. If you are using this product please try using DRC's. I understand the difference. View detail
You can do minimal work
I purchased it because I was attracted by the variety of advanced tools and the low price of the price.
Although it is hard to do, removal of Circlip is possible somehow.
We use KTC's Tools Set at work and the usability of this tool is at least Level when compared with KTC tool.
However, since the KTC tool is very expensive, I think that if you are Sunday maintenance Level, the selection like this item is cheap even if it's difficult to use.
View detail