Reviews
It's safe to use
I always use Sk11 tools. This product is also well made and easy to use! View detail
Replace from old Type
Purchased to set CIBIELight180Π's Position to T10.
Since the wiring is the same as the original, it was easy to process and fit perfectly into the original Rubber frame.
The texture is not bad, so I think the cosmetics are good.
View detail
Cheaper than Fat Nan
It's almost meaningless to be cryptic. w
I bought this for my Drain bolt and I like the angle.
It is very easy to use and has great cost performance!
I regret that I should have had all my other Sizes here!
View detail
Taken!
It worked well for the Gold amount. View detail
Smaller is better!
I thought that the Large size would be good for tightening and loosening both vertically and horizontally, and since it is small, I wondered if the Large size would be strong enough at first. I wondered if the Large would be strong enough at first, but that is as expected of DAYTONA. I think I will know the durability as I use it more and more, so please give me some time. I am going to use it as an in-vehicle tool. View detail
Longed-for Kowa T-Type Wrench
Cheap and easy to use, Commendation but not easily distributed. View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R
It's definitely better to have it.
[How is it used?
NSR250R (MC21) I purchased the RCValve to clean the RCValve of
I thought about forcing myself to pull it out or get the materials from a hardware store, but I decided to buy it if I could do the work easily at this price.
Was the one you received as per Image?
The product was as shown in the pictures.
There is an M5? reverse thread cut into the bolt center.
How was your experience with it?
In a word, it was God Items.
We worked with the Engine on the car body, and it is easy to work in tight spaces.
Quantity as per the product description:Just Set and turn Nut and RCValve will come out.
The RCValve was removed when the nut had just gone around the Bolt, and I realized that both the collar and Bolt were of a calculated length.
Once you get the hang of it, you can remove RCValve in less than 5 minutes, so it's a shortened workflow.
[Points to note]
I don't think so.
I also saw an IMPRESSION that you would like an Instruction Manual, but I don't think there is such an easy task, but....
How did it compare to other products?
Not that it was a product, but I thought about pulling it out on my own somehow.
But I bought it if I could work reliably at this price.
【Review】
I personally thought that if there is work to be done to pull out RCValve, it would definitely be better to have it.
It is by far safer than attaching a nut and pulling it out with an iron, and considering RCValve's breakage risk, I don't think it is a part to be stingy with.
View detail
A must have for working in your bike!!!
This tool helps a lot when you need fast screwing. Sometimes you do not need carry many tools, the simple is the best... :-) View detail
Fits: Others CUB ,CB50,MONKEY,GORILLA,APE50,APE100,DREAM50 (AC16/15,AC07),KITACO Ultra head,KITACOAPE series SPLHead
To use
I was worried about the poor rating, but it works just fine. (I'm a mechanic.)
You can adjust Tappet without it, but it is useful to have it.
View detail
I can use it
I recommend it because it is easy to use. View detail
The details are still this
Recently, Gear wrench has become thinner and can be used for the Large part, but it can not be used for the smallest size. (8,10mm) I bought more of the following.
Plating with a non-slip semi-nashiji surface, thin for easy gripping, and I-section and wide sides for a grip that does not hurt the hand. The bolt nut is firmly gripped with a sense of security. The rigid feel with little rattling makes it easy to feel the turning sensation, and there is no sign of tampering when used in normal operation.
This Wrench is the 21st Century VERSIONTool." The old product, before it was released as the "M" series, was thicker and protruded at the center, but this one is thinner, yet more rigid. This one is thinner but more rigid. Above all, there is no waste part at all, and it looks good.
There may be differences in usability, durability, and reliability from the high-end products, but we feel that this is an area where the average person does not need any more. No worries about breakage if you use it normally. There are no problems with ease of use at all.
I felt 8mm was a little short. (probably due to the Torque used) The length from 10mm to 10mm is long enough for a man with a large hand to turn.
View detail
Fixed Type is good.
It looks a little cheap, but the Fixed Type is easy to use.
I have a Free one, but it comes off during use, so I will use this one.
View detail
Standard tools with outstanding reliability
Recently, Gear wrench has become thinner and can accommodate a Large portion, but for places where it still won't fit, the Smallest size is available. (8,10mm) I bought more of the following.
The thin, non-slip, semi-nashi-lined plating is easy to grip, and the I-section grip handles prevent palm pain. The grip is thin and easy to grip with semi-pearskin plating to prevent slipping. The rigidity of the grip is very low, so it is easy to feel how it is turned, and there is no sign of tampering when used normally.
There may be differences in usability, durability, and reliability from the high-end products, but we feel that this is an area where the average person does not need any more.
No worries about breakage as long as you use it normally. No problem at all with ease of use. However, I would feel more comfortable if the 8mm was just a little longer than this.
View detail
KTC Cup Type Oil Filter Wrench
[How is it used?
Currently in use
How was your experience with it?
I bought this to replace the Oil Filter on my Z1000 and it has been working fine.
How did it compare to other products?
Compared to the unlimited-stage product that hooks onto the Oil Filter, this product can only be used on Oil Filters of the same size, but it is by far superior in terms of rigidity and reliability.
[Points to note]
To avoid purchasing the wrong size, carefully check the Oil FilterSize of your vehicle before purchasing.
Other items that would be helpful
Included Parts:Yes/No
None
Items to buy together
Torque wrench
View detail
Rim inner rust remover use
Used to remove rust from the inside of the rim when replacing the tire on a CUB.
Scrub with this and a steel scrubber
It would be useful if it were available.
It's not something normal people have much use for, though.
View detail
Ideal for CUB without Drain bolt
Ideal for CUB without Drain bolt
Reasonably short and angled at the neck so it's easy to work with.
View detail
Ideal for mounting and dismounting Mirror
Used to attach and detach Motorcycle Mirror.
As I thought, KTC is of good quality and safe to use.
The Spanner on the on-board tool scratched Mirror, but I felt that KTC's Spanner was less likely to scratch it.
View detail
More than the price
Tools are required to be precise, and I think SK11 has a lot of good products for the price. View detail
Used in Z1
I purchased this product to remove the M6 Screw from the Generator-Cover and Transmission cover on my Z1. I bought this product because I have an old motorcycle and the screws are stuck and easily licked, I was not sure if I should buy a shock driver because of its high price, but this product is very inexpensive and I bought it on the spur of the moment. I think it is a good driver because it can be used as a normal driver. View detail
It was easy even for the first time.
I bought this product to try plug replacement.
This was my first plug replacement job and I found this Wrench very easy to use.
View detail