Reviews
Since it corresponds to M28 and M26, if a screw suits, it can use also for other vehicle types. I purchased for spacy 125 (JF02E) business. Since the dream is M28 exactly, and it can use as a puller of two engines also by chance, it is satisfactor
Since it corresponds to M28 and M26, if a screw suits, it can use also for other vehicle types.
I purchased for spacy 125 (JF02E) business.
Since the dream is M28 exactly, and it can use as a puller of two engines also by chance, it is satisfactory.
Since the hexagon-head part of the somewhat expensive kana ? outside is 35 mm compared with the puller of the other company, a big adjustable wrench etc. are needed for a baffle.
View detail
It purchased for bolting work with 3/8 torque wrench. Since it is only a bit even if it is arranged at a low price and the point of a bit gets somewhat bad, since general + and hexagon bit of 1/4HEX can be used if there is this, it is freely exchangea
It purchased for bolting work with 3/8 torque wrench.
Since it is only a bit even if it is arranged at a low price and the point of a bit gets somewhat bad, since general + and hexagon bit of 1/4HEX can be used if there is this, it is freely exchangeable.
Although the tool of a signet has a cheap price, since it thinks that especially accuracy is bad and does not become precocious, I am pleased.
I think that it is recommended in order to arrange a tool, without being cheap and taking a place.
View detail
It purchased for WR exchange of the cygnus X. Although the impact wrench performed removing, since impact was dreadful, bolting also used this! I think that it is user-friendly and I will use it also for exchange of a future oil filter. A price is
It purchased for WR exchange of the cygnus X.
Although the impact wrench performed removing, since impact was dreadful, bolting also used this! I think that it is user-friendly and I will use it also for exchange of a future oil filter.
A price is also handy and a recommend.
View detail
10 mm and 12 mm used well. Although the spanner of the 1980 yen set of a home center was used until now, since it was easy to lick with the experienced screw, it is safe now. It is one article good texture and satisfactory.
10 mm and 12 mm used well.
Although the spanner of the 1980 yen set of a home center was used until now, since it was easy to lick with the experienced screw, it is safe now.
It is one article good texture and satisfactory.
View detail
It is convenient if you are. In the case of a motorcycle, 8, 10, and 12 are arranged by T wrench, and if others are constructed with this and an extension bar, they will think that they are efficient. As for the feature of this product, the die le
It is convenient if you are.
In the case of a motorcycle, 8, 10, and 12 are arranged by T wrench, and if others are constructed with this and an extension bar, they will think that they are efficient.
As for the feature of this product, the die length of 3 / 4 field case is [ 160? and a few ] that it is short (200? thinks many [ other manufacturers ]).
Since it is a tool which plays an active part to work quickly rather than using [ strong ] from the first, applying it, the shortness of this few and the merit of management are pleasing.
View detail
The parenthesis of a light and red color is good. Something is a connoisseur when it puts in the tool box. Is it what you may have for the man of a tool lover? Since the skid was given to the surface, it was able to turn to it firmly, without
The parenthesis of a light and red color is good.
Something is a connoisseur when it puts in the tool box.
Is it what you may have for the man of a tool lover?
Since the skid was given to the surface, it was able to turn to it firmly, without sliding.
The minimoto of ten inch wheels was also able to be used satisfactorily.
When going for touring, since the way of the valve cap which carries out the Mus time and is attached is not lost, it is recommended.
View detail
The bolting torque of a wheel nut is 12 or more kg-m. powerless me -- at last -- 60 cm -- 1 / 2 spinner-handle purchase was carried out. The 22-mm socket which it had is 3/8. This is purchased under the pressure of necessity. It has the ad
The bolting torque of a wheel nut is 12 or more kg-m.
powerless me -- at last -- 60 cm -- 1 / 2 spinner-handle purchase was carried out.
The 22-mm socket which it had is 3/8.
This is purchased under the pressure of necessity.
It has the adapters of 1/4, 3/8, and 1/2 for each size, and there is no loss.
Signet products are regularly used by that which is cheap and also says quality! Although it is a simple tool auxiliary article, a socket is also connected firmly.
View detail
It purchased by Mr. Web!ke to portable [ in touring ]. There is slightly heavy touch, and since it is dramatically cheap as a ratchet handle, even if it loses at the touring point, also that it is also pocketbook and mentally, there is little damage.
It purchased by Mr. Web!ke to portable [ in touring ].
There is slightly heavy touch, and since it is dramatically cheap as a ratchet handle, even if it loses at the touring point, also that it is also pocketbook and mentally, there is little damage.
(Smile) When not using for heavy maintenance not in a touring portable way but in usual maintenance, it was thought again that it was a satisfactory product level.
However, it is as too cheap, and it said that structure was coarse, or the bond ? for grip part fixation has overflowed like a picture.
However, since there is not necessarily a problem in a function, a price is exempted and it allows.
I think that this price deserves four stars enough even if it deducts that neighborhood.
View detail
Although the same product has come out also from POSH, I hear that this one is that it is compact and easy to carry and made in Japan, and it purchases here. Although used for VM26, most carburetors can be adjusted if it has this one. It is a diff
Although the same product has come out also from POSH, I hear that this one is that it is compact and easy to carry and made in Japan, and it purchases here.
Although used for VM26, most carburetors can be adjusted if it has this one.
It is a difficulty which must work worrying about whether screws are licked by being too compact and being hard to put power.
View detail
It purchased for exchange of the plug of HONDA SHADOW400 NC34. Although it arrived to the plug for a while or was anxious, the plug was able to be removed somehow. Although the wrench was caught just for a moment, it has exchanged safely.
It purchased for exchange of the plug of HONDA SHADOW400 NC34.
Although it arrived to the plug for a while or was anxious, the plug was able to be removed somehow.
Although the wrench was caught just for a moment, it has exchanged safely.
View detail
The first tire change must have been more serious when there was not Colet. I think that it has and there is no loss if it is those who fix by themselves although it is not a so always used thing.
The first tire change must have been more serious when there was not Colet.
I think that it has and there is no loss if it is those who fix by themselves although it is not a so always used thing.
View detail
[Buying motive] The clip joint is used in the case of - chain exchange. - Although it was working by the adjustable wrench of the in-vehicle tool and the clip joint was able to be inserted in or removed, since it was not able to hold firmly, the clip
[Buying motive] The clip joint is used in the case of - chain exchange.
- Although it was working by the adjustable wrench of the in-vehicle tool and the clip joint was able to be inserted in or removed, since it was not able to hold firmly, the clip was gnawed several times and it had become a cause of next rust, etc. until now.
- It was considered as the pliers for a clip for exclusive use this time, and this product they are pliers useful for removal of the pliers product number:68094 description-of-item chain clip for DAYTONA daytona:chain clips. was purchased.
The [feature of goods] Since the die length of the level difference part pliers right and left of a clip and a pin is different as it understands with - photograph, a clip and a pin can be held certainly.
Since it swings wide and a crack is attached to a chain, it does not become precocious.
[Grading of goods] Compared with - adjustable wrench etc., work is very easy, and it is certain.
- A price also thinks that it is not too cheap too highly and it is good goods.
- They are four stars.
View detail
When calling it the bit holder, the thing of bit maintenance with a magnet was most, but since he wanted to avoid magnetization of a bit, this product was used. Maintenance of the bit is just firmly carried out by the clearance considered to be the mi
When calling it the bit holder, the thing of bit maintenance with a magnet was most, but since he wanted to avoid magnetization of a bit, this product was used.
Maintenance of the bit is just firmly carried out by the clearance considered to be the minimum, without escaping simply.
I think that it is held by tension with a sufficient degree.
This price is very a recommend in this accuracy.
Since the combination by the side of three eighths of ratchets would be various, the star was set to four.
View detail
Although there is no scene which needs a deep socket not much and most was able to work with extended Bar and glasses to the usual socket by motorcycle, Although a sensor hits with a standard socket, and it does not enter, it cannot access from an eng
Although there is no scene which needs a deep socket not much and most was able to work with extended Bar and glasses to the usual socket by motorcycle,
Although a sensor hits with a standard socket, and it does not enter, it cannot access from an engine guard's opening with glasses but the oil is changed since the drain bolt with a sensor was attached,
One by one, the engine guard had to be demounted, and since it was troublesome, it decided to buy a deep socket.
However, since it was a tool of only a drain bolt, since the deep socket of the signet was cheap, it bought it with the cheapest possible thing.
It is cheaper than the standard socket of KTC.
Although the price is cheap, the surface is mirror finish, and its appearance is also beautiful and it thinks that the processing accuracy of the plug by the side of a bolt and a joint is also satisfactory.
As for the receptacle of a bolt, naturally, power is applied to the neighborhood [ not the tip of the angle of a bolt but ] side in the sixth page.
Although the hole which misses a sensor cord in my case has been made in a side face, since reinforcement is satisfactory, by anticipated use, I still think that there is no problem.
However, frequency in use uses only a years time only by oil change.
Since I think that cost performance is high, especially in a direction without a prejudice, I think that this price is recommended to a tool.
View detail
Since the bit socket of HAZETTO often looked at the talk that it was good, it carried out plurality size purchase. It is used for Aalen bolts, such as a motorcycle and a bicycle. The feeling of a fit to the hole of a bit portion has the peculiar f
Since the bit socket of HAZETTO often looked at the talk that it was good, it carried out plurality size purchase.
It is used for Aalen bolts, such as a motorcycle and a bicycle.
The feeling of a fit to the hole of a bit portion has the peculiar feeling currently turned to the direct, if preeminence and torque are added.
Although it was also in other Ho's impression, it is hard to explain this feeling by means of language.
Merit looks nice much more in case of a high precision bolt like a titanium bolt, work is very smooth, and it is feeling II.
I think the good-quality item corresponding to a price.
View detail
It is charmed by the price and purchases. - It is touch with thickness and exactly sufficient die length in orthodox form. Since R is attached to the end of the handle, it is difficult to come out somewhat. - The design of the character of GEN
It is charmed by the price and purchases.
- It is touch with thickness and exactly sufficient die length in orthodox form.
Since R is attached to the end of the handle, it is difficult to come out somewhat.
- The design of the character of GENUINE HICKORY became a simple considerably.
Whose pre- design was better --
- A center of gravity is a 1 or 5-cm place from a portion with a thick root of a handle to the right.
As it is, I think that it is a light handle.
- Coating of the varnish ? feels that it is coarse.
Although I think that there are a hit and a blank BOTETSU and the attached portion are 2~3 places in some places.,
It does not appreciate and is satisfactory.
View detail
Even if there is nothing, become somehow, but. it being, or becoming, and pains being taken for a hard tire to carry out bulb appearance before being one convenient article, furthermore. it purchased because there is also such elegance, when using
Even if there is nothing, become somehow, but.
it being, or becoming, and pains being taken for a hard tire to carry out bulb appearance before being one convenient article, furthermore.
it purchased because there is also such elegance, when using instantly,
the kana ? tip where the one to a slight degree which could pull out the bulb easily only by pulling, bought it, and thought was good, which existed that the head is caught in the rubber of a rim band and it is however hard to escape from it, and where the head is thinner is easy-to-use -- the Mus time -- also carrying out, although it seems that it can do,
when kept firmly, power was not put and was not able to loosen -- since it thinks that there is a point of improvement to a slight degree -- four stars
View detail
User-friendliness is quite good although it is ball pin hammer 12OZ (fiberglass handle)!! It is convenient that a hand does not become painful or is not numbed even if it uses, since it is [ a grip part ] soft. Since a size also has more than one,
User-friendliness is quite good although it is ball pin hammer 12OZ (fiberglass handle)!!
It is convenient that a hand does not become painful or is not numbed even if it uses, since it is [ a grip part ] soft.
Since a size also has more than one, I also regard that it can unite with a use as it being one of the charm.
View detail
Since the manufacturer's T handle had become phaseout, it purchased. A price is handy and it can adjust die length by extension. Although a ratchet handle is inconvenient to turn pushing, this product tends to put the power from a top. One is
Since the manufacturer's T handle had become phaseout, it purchased.
A price is handy and it can adjust die length by extension.
Although a ratchet handle is inconvenient to turn pushing, this product tends to put the power from a top.
One is a tool to arrange.
View detail
The glasses wrench of a no brand currently sold to the home center etc. after all is differed from. It adapts itself to a hand firmly. Appearance is also good. I think that I will purchase other sizes.
The glasses wrench of a no brand currently sold to the home center etc. after all is differed from.
It adapts itself to a hand firmly.
Appearance is also good.
I think that I will purchase other sizes.
View detail