Reviews
good-looking
Color-coded by Size, it is easy to find the Size you need when working.
The high strength and precision of the Torque allows the Torque to be applied firmly without tampering.
The price is high, but well worth it.
View detail
watchman
I always buy this product.
It's expensive, but the tip is sturdy and fits the screw.
Very easy to use
We do have some thicker Grip products.
The force is easily applied when tightening, which can lead to overtorque.
I like this one just as much as the other one, which can be tightened just fine.
Grip has a distinctive smell, so tastes vary.
View detail
One and only
The world's standard slotted screwdriver.
Ordinary slotted screwdrivers have a tapered tip for ease of insertion, but PB's patented parallel surface finish on the tip of the tool allows it to fit perfectly with Minus screws for machines, many of which have parallel grooves.
Grip is like a rough rubber. I think it is not slippery, but there is not a sense of luxury at all.
It was just unpopular with the old Plug lip. "Ewoks." You don't have to worry about your toolbox getting smelly.
View detail
Size can be checked at a glance.
The Hexagonal Wrench is more expensive than the regular wrenches, but it is color coded by size so you can find the size you want at a glance. The strength of the wrench is high and you can put the torque firmly. View detail
Just fit
I bought this for my Carburetor Pilot Jet.
It was Just fit on a Mikuni BS34 Pilot Jet.
The tip of the blade is Straight to some extent, so it can reach the bottom of the Jet.
There is a slight rattle when turning, but I don't think the Jet will chip or anything.
It would be perfect if the thickness of the cutting edge was another 0.1?
The width is Exactly.
View detail
Expected
The hardness, the bite, it's great.
I have a preference, but I'm the first of this kind of Bit.
Some people may think it's too hard and will damage the Bolt, but I use it with the softer Snap on depending on the application.
View detail
I bought it to adjust my glasses. I love it!
I bought it to tighten up my little Screw from Glasses.
I love it, I've never bought anything else from PB products.
This is the only way I can tell, but the common Chinese DriverKit looseness is not here, as it should be.
View detail
Is it good?
Because it is PB, the quality is high, but it is a little expensive. When you want to hang the torque, it is not suitable for you. Of course, it is a good driver, but when I think about the cost performance, I think that the Mega-Dora of Vessel is superior. View detail
Okay.
The famous PB slotted screwdriver has a parallel tip It has steps like this. It is easy to use, but it is not easy to damage it because it has no strength. If you want to damage it, you should prepare the driver for it. Time was twisted and the tip was broken. (Sad.) View detail
It's marked for electric power!
It can be used as an extension of the Bit although it is for electric power.
Originally, it should be aligned with Driver, but it's aligned with Bit and the length is not enough. I recommend it when.
However, it's a bit wobbly because it's spliced in.
View detail
Good accuracy
It is Firmly in the shape of a star with precision.
Because the appearance is also Colorful, and it is hard to rust, I think that the cost performance is better than buying a bad Bit. It is.
However, the first purchase Cost is high
Also, it's not compatible with the Bolt for theft response because Ana is not available.
View detail
PB is good
It doesn't have that distinctive PB smell!
If you use a lot of blades with one Grip, you can get a lot of blades
It can be changed into various drivers
View detail
Grip and Quantity:Set
Replacement Swiss Grip Screwdriver Handle and Quantity:I bought it as a set
I had to use a bit, so this will be a driver
Bit is cheaper than buying a bunch of Blade's
View detail
Good accuracy
That's a PB
It fits tightly into the hexagon with precision
It looks COLORFUL and rust-resistant, so it's better than cheaper wrenches
I think the costumes are good
However, the first purchase Cost is high
View detail
Good accuracy
That's a PB
It fits tightly into the hexagon with precision
It looks COLORFUL and rust-resistant, so it's better than cheaper wrenches
I think the costumes are good
However, the first purchase Cost is high
View detail
It served its purpose
It is purchased at the same time as the 8mm one, and I use it with ANEX's Handlebar
This 10mm was the right choice for the Initial Adjuster adjustment of the Front
The product is well suited for its purpose and I would give it 100 points for its quality and texture
I'm sorry, I didn't feel much Merit sticking out in Others Others has been given an average score
View detail
No problem
It is purchased at the same time as the 10mm one...I use it with ANEX's Handlebar
I can buy more if I need it after using it on a motorcycle, in my car, in my house, and many other things It's about as good as it gets
I'm sorry to say that I didn't feel that there was much of a Merit that stood out, but I'm going to give it all an average score I received it
View detail
When you get used to it, you can distinguish size by color
This is handy!
When you get used to it, you can distinguish the size by color, so the work efficiency went up Also, it simply makes the look of Garage more gorgeous
However, the color itself is a paint job, so it will come off after years of use Even if you treat it roughly, it doesn't peel off so much, so it may be excellent
View detail
Fertilizer tool box
【What made you decide the purchase?】
- Because I possessed precision Phillips Screwdriver made by PB, I will buy Slotted screwdriver as well. Size is the same as the Phillips Screwdriver Smallest No. 00
【How was it actually used?】
- Ease of use like the Phillips Screwdriver, the Grip end rotates to Smooth without resistance, so I could turn Screw securely. However, compared with Phillips Screwdriver, I am concerned that the total length is 10 mm shorter
[Is there anything I was disappointed about?]
- This is also the same as Phillips Screwdriver, but the Gate trace processing that was done when casting the resin of the Grip part is not good finish. Sharpen the convex portion with Design knife
【Hope for Manufacturer - Please let me know if you have any improvement points]
- It is easy to understand if the color of Grip is different by Size
【Have you compared items?】
- ANEX Super fitPrecision Driver
[Others]
- As the usual frequency of use is Precision Driver, even if you have a hobby tool that does not have much activity. The fertility of the tool box has increased ( - ∀ - `)
View detail
Ease of use as expected.
Purchased for Carburetor OH. Satisfied with ease of use as expected.
There is only high, it is also convincing that it is expensive.
However, this Driver's Blade is a Taper type, not a Type with a famous step.
Type with a step is "Swiss grip" It is Type.
View detail