Reviews
It is inexpensive and easy to use.
[How is it used?
This tool was used during Tire replacement &Puncture repair work on a Dual Par Pass car.
We are currently using PROTOOLS' Air Valve Puller, but we used this product before that.
Many Dual PurPass vehicles that enjoy mountain play and forest roads use a Tube in the Tire, so these Items are very useful for getting the Valve of the Tube out of the Valve hole in the Rim.
Wire is thin, so please be careful when working with it, as the Wire clamps that hold it in place at the handles can easily come off or break if it is pulled with too much force.
Did you receive the item as per the Image?
Material:The aluminum and simple design of the handle makes it very easy to use, and its compact size makes it highly portable.:I always had it in my Set, it is just like the Image.
How did you like it?
Once you get the hang of it, you can easily pull out the Air Valve in no time at all.
Especially in winter, when tires become hard, I can't do without this product because it is so useful that I don't feel like doing it without it.
[Points to note]
After fixing to the Valve mouth because the Wire is thin Forced by brute force." Be careful when trying to pull it out, as it may come off from the clasp or Wire may almost break off, making it fragile.
If you search for DRCAir Valve Puller in the product introduction section of Webike, you will find a video at the bottom left of the introduction section that explains it in an easy-to-understand manner.
How did it compare to other products?
The wire part of this product was getting badly warped, so I bought a PROTOOLS Puller from Webike at a lower price at the time of replacement. I think I will go back to DRC's Puller when the Puller I am using now is no longer good. (Possible individual differences) 。
Other items that would be helpful
Point and hang of installation
With your free hand, press lightly on the backside of the valve of the tube toward the rim while guiding the tube.
The rest, as I mentioned above, you can watch the video.
Basics We're not in a hurry. We're going to do our job well and reliably." is the best shortcut.
[ITEMS TO BUY TOGETHER
Since this is used when replacing a tube-type tire, you will need to prepare a lever, BEETWax, and inflatoretc. for tire removal and tube replacement (you will also need a removal tool to get to that point).
[Opinions and requests to Manufacturer
It would be nice if you could use a stronger wire to ensure durability, but we would be grateful if you could just keep this product in the lineup.
View detail
textured good feeling
Purchased as a Tirefor replacement, I chose it for its visual quality. View detail
No problems at all.
Purchased for Tire replacement. No problems at all. View detail
If you want to build a Tire with Tube, this is the one.
It is useful to pull out the Tube type Air Valve with ah-ha.
However, the Type Puller, which uses leverage, is better for use with Air Valve for Tubeless.
View detail
Great Valve Core Remover
This is a very well made core remover. The finishing is excellent and having a steel core tip means it wont wear or deform like Aluminium tipped items will. It also makes it more positive to use. The small hole in the handle allows for the use of additional leverage if the valve is very stiff or tight. DRC makes some very nice products and this is one worth buying... View detail
Practical necessity
This is one of those invaluable tools that you never think you need until the time comes that you are mounting your own tire or changing out a tube. Nice and small for the trail pack. For the price you can't afford not to have one of these tools. Avoid the sore fingers and get yourself one or pay the guys at the shop to change your tires for $30 a pop.I am glad I added this to my kit. Make feeding the vale stem through the rim so much easier. Changing your own tires, Yes get it! View detail
difficult to get a hit on (e.g. in a fight)
[How is it used?
Tire hand set
Was the one you received as per Image?
Small at best, Compact at worst
How was your experience with it?
Normal use Valve core is a little shallow
[Points to note]
Red to see the imprint and not to lose it.
How did it compare to other products?
Anodized and texture is good
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
I don't know why I didn't buy it before... it's so good!
I thought I could do without it, especially until now. I thought I could do without it, but with this one, my fingers are not tired at all when I work.
All this time I've spent struggling with...
However, you may have to go through us first, so there may be a bit of hang.
(Well, people who have trouble with this wouldn't want to do it on their own in the first place.)
View detail
I think that the fine sight user-friendliness as a tool is not different from the air valve tool currently sold at the home center etc. However, w from which there are the texture and the fine sight as a tool, and the inside of a tool box becomes fash
I think that the fine sight user-friendliness as a tool is not different from the air valve tool currently sold at the home center etc.
However, w from which there are the texture and the fine sight as a tool, and the inside of a tool box becomes fashion for a while
View detail
Aluminum cut-outs and good texture for the price.
This product is Aluminum Cut-out with good texture and easy to use. I got two of these for a very reasonable price! View detail
Increases work efficiency
It would be more efficient to have it when replacing tires and tubes by yourself.
It is useful if you have one.
View detail
I lose them all the time.
[How is it used?
I'm playing Enduro and playing with it.
I change tires frequently, and one thing that happens is that I lose my bugger.
It's frustrating, isn't it? I can't do anything without airing it out.
I decided to replace it with this product, which has an easily recognizable color & straps to prevent that from happening again.
Was the one you received as per Image?
As per Image
How was your experience with it?
I love how flashy the colors are! You can find it easily.
If you don't choose Red, it doesn't matter.
[Points to note]
The Body is round and it rolls.
It is Recommendation to put Strap on it to prevent it from rolling.
How did it compare to other products?
I chose this one that was delivered immediately.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
Keep the Strap on, Large thing.
View detail
Once you use it, you can't stop.
If you've ever had to replace a tire with a tube, you've probably done it before.
I can't get the Valve of the Tube through the hole of the Rim because my finger hurts...
In such a case, it is this. The shape is different, but functionally it is the same as other companies' products of the same etc.
I've been using it for about 30 years, and it's now dead due to a broken wire (laughs).
I bought it without hesitation because it is made by DRC which is famous in the Off-road world.
It's going to last a long time
View detail
Core driver that I'm sure I'll lose
I bought this because I lost my KITACO core driver.
The feeling of use is not a problem at all, and because it is small, it can be used for the Spoke wheel. As expected, it is a manufacturer that specializes in Off cars.
I wanted to buy Red, as mentioned in other Impressions, but it didn't seem to be in stock, so I went with plain, but it's a color that seems easy to lose.
It looks like a Bolt or Spacer, so if you drop it in the Garage and it gets mixed in with the Gold parts, you won't know it's there.
Because the hole for Strap is also vacant, it is possible to make it to Key Holder and to take measures, but I recommend that you buy Red.
Since it is so small, you can keep it in your portable tool case.
There is one with a handle that is easier to use, but it takes up unexpectedly much space, so this is just right.
View detail
Tire Replacement Offerings
[How is it used?
I compete in Enduro races as a hobby.
I change tires frequently, choosing tires to match the course and trying out new tires when they come out.
The Point that is quite irritating in that case is Timing through the Valve part of the Tube.
This product is a great solution to that frustration.
Thread it through the Valve hole beforehand and attach it to the Screw hole in the Valve core. All you have to do is pull it.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It has been overwhelmingly easy.
How was your experience with it?
Best. The back of my hands were always getting raggedy, but it's easy not to have to force my hands into it.
[Included Parts:were they on?
Included Parts:Or rather, the tip is a bug-turner, which is convenient.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I think it would be easier to thread through the hole if it was more tapered.
View detail
It's slippery to touch with dirty hands
I bought the product after seeing the photo, but the product was shallow in the Knurl process, unlike the attached photo 。
If there are any minor changes to the product, please replace the pictures
View detail
So much benefit …
When performing the Tire exchange of the SUPER CUB, I thought of making the efficiency of the work, and the Tube Buy the Air Valve Puller to pull Air Valve
I actually used it, and while it was certainly easy to get the Air Valve through the holes in the Rim It was not that easy or fast, so it was a bit of a letdown
The separate attachment to Air Valve allows the wires to be rotated together when screwing in No construction But the Wire wasn't flexible enough, and once I used it, I got a breakage mark on it
View detail
Even if you do not need it. Convenient if there is one
【What made you decide the purchase?】
- When releasing the air at the time of Tire exchange, I pushed Air valve with Slotted screwdriver, but because it is not a high price, I decided to buy a special tool. So I choose a good DRC Driver with Anodized Finishing
【How was it actually used?】
- In the case of Slotted screwdriver, the tip was shifted many times and it was difficult to remove the air, but there was only a special tool and it was possible to remove the Core smoothly. Is Knurl processing of slip prevention effective or easy to turn
[Is there anything I was disappointed about?]
- It was smaller than I expected
【Hope for Manufacturer - Please let me know if you have any improvement points]
- I want to know how to utilize the hole opened in the handle part. Besides installing Chain ...
【Have you compared items?】
- Emon Tire Valve Driver
View detail
It was really useful..
I tried to exchange the XR 250 's Tire and purchased it. The work of setting Valve of Tube became much easier to do and I was able to shorten the working time of Large width.
I am useful!
View detail
It is convenient to have
Even if it is not necessary, it will be anything else but it is convenient.
Especially when you become a Puncture repair in the mountain instead of Garage, promptly
I'm putting it in an in-car tool as I want to do it.
It's not that heavy either.
However, I think that the price is too expensive as it is a self-made tool if I want to do it.
View detail