Reviews
It's not a problem
MINIMOTOMinimotoThe MinimotoPiston ring compressor has arrived, so I'm going to give it to you I'd like to give you a quick in-play of how it feels to use it
I think the quality of the product is reasonable for the price range
It's safe to say that you won't be disappointed by the amount of gold you buy, which is Large
I bought the product and I don't feel like I'm losing money
As far as shopping goes, I felt like it wasn't a loss
It is a product worth the Gold amount
View detail
Is the costumer a good one?
When replacing the STREET TRIPLERS' Handlebar, the Switch box is The Bolt that I'm using is Torque's T8, and I didn't have the corresponding tool, so I bought it this time and used it I did
I wish I only had the T8, but if you buy it with a SocketSingle Body, it's almost $1,000 So, if you want to use Quantity:I bought this product to buy it as a set
Quantity:Considering it's a Set, I wonder if this price is cheap?
Quantity:The Size of the Set is set to T2, T3, T4, T5, T6, T7, T8, T9, T10, T15, T20 And I think it's Size from T10 upwards that I often use To be honest, I do not know where to use Smaller than T8 I'll assume it's yada
Speaking of Small Dice, this product is even smaller than I thought it would be, and for some people, it's hard to hold It might be hard to use
View detail
First time replacement
Brake is one of the most important safety components, so you should ask a PRO to replace the fluid for peace of mind However, I decided to challenge it in order to increase the maintenance kill Plastic bottle was also considered as a receptacle when removing the old Fluid, but it was not Air release Quantity with tools to lower Risk:Purchase Set
Because the clip that secures the hose and the bottle is loose and can easily pull out, it is not possible to use the I've replaced it with a stronger one, but … it's still going to pull out with a little bit better results Loose The accompanying Instruction Manual includes a series of work instructions with diagrams
Thanks to the pre-review of the replacement procedure before the job, the job was completed without any air biting There were no leaks from the Hose and the Bottle did not collapse, but the old Fluid and the new I chose a different color to distinguish between the fluids, but the hose was a transparent yellow So it was hard to understand the timings to switch between them
I took the bike out for a spin to see how well the Brake works after the changeover, and there were no problems None If you want to reduce risk and increase efficiency, you can install One-Way Valve might be a good idea
View detail
It makes air removal easier
I used it when I changed the brake hose of MT25
I don't think it's particularly necessary to replace the brake fluid alone, but this time the hose replacement and One-Way when air is mixed in with Caliper's Overhauletc It's easier to vent the air if you have Valve
View detail
Not exactly a hundred dollars, but is it less cosmetic!
This is a regular Brush
However, I'm not sure if I'm going to be able to think of a cosmetic
If you have a point, why not buy it?
I may not have had to buy it because it's MONKEY
View detail
It's neither good nor bad
What I say is not to confirm after attaching.
This time, it's in Cowl so I can not see it.
By saying, the evaluation is unknown.
View detail
I wish I had stud bolt removerSet of KTC...
I did not buy it with Webike, but when I got this Remover set I thought regretfully that the four Remolver internal Roller surfaces were rusted... It is a material with price, so we would like you to use ginger, rust resistant Material.
Stud bolt remover of KTC previously purchased had no rust... Is commonplace?... Also, compared to KTC Stud bolt remover, I think that Roller's play and backlash are many... I am worried whether it will definitely bite with this...
I wish I had turned to KTC's Stud bolt removerSet and got to regret it.
Mail-in is 12. Not 7. I think that it will be 5. (It does not matter if you use Adapter... )
View detail
House - - -
I cleaned the grove of my house Sash, or I cleaned the car's Wheel again? 3,000 yen is not enough, so I bought it for the time being. Well I'll use it something if I get near the end of the year. View detail
Wiring
Grip I tried to prevent Twist at the time of exchange, but at the moment the product situation can be arranged anywhere, such as HOME Center-, but because it is troublesome I exchanged together with Grip View detail
Feel like either way
I tried buying thought that I thought as soon as possible because Brake fluid exchange of three Motorcycle is done by myself on a regular basis.
The structure is Material : It is a very simple combination of an iron ball which becomes a lid in the cylinder of Aluminum and Spring for pressing it.
I immediately tried using Fluid exchange. Although the exchanging method is done with the air bleed Pump of the syringe type and when the air is difficult to escape, it is done by Pumping of the Brake lever but it is certainly a check valve but it is because it was not used until now, I can work on Smooth even without it, so I felt it was difficult to do it again if extra things were added during Tube. After all, I used only the first one and removed the second and subsequent machines and worked.
If you are familiar it's not necessary Parts but if you are unfamiliar it might be benefited.
View detail
Tentatively necessary first
Piston ring is indispensable for gaps and valve clearance measurements. Even if you do not have many Size cards, you can basically Cover in combination. If you do not apply Oil first, hard and thin Blade will bend.
Well, it is inexpensive so you can buy it at consumable item Level even if it is torn.
View detail
In cospa
Oil It was used during replacement. Oil Since it is about one exchange every 3 times it is not expensive, but it was cheap so I bought it all together. I'm satisfied because I can save the trouble of using the water-resistance paper to familiarize the surface and use it again. View detail
Forgding Measuring Cup quotient Product No : PC-00003
This force Measuring Cup PC-00003 is Material : It is Plastic's 30 cc Cup.
Fluid (Brake fluid) Approximate amount when swapping (30cc) I used it to divide it into Small.
In the case of Fluid, when working with the main lid of the can open, moisture in the air invades and it seems that it will react, so using this powered Measuring Cup PC-00003 several times I use it separately by pouring Small..
It is use of this force manufacturing Measuring Cup PC-00003 to the last as dividing to Small and simple as a guide, but since you can work while grasping the amount of Fluid you are using, you can carry out the work efficiently.
Also, since this capability Measuring Cup PC - 00003 has a lid, I can store O - ring and RingWasherGasket etc in a way not to be dented or scratched inside, or keep the Bullet Terminal terminal and Mini Flat Type Also useful for putting small parts such as Fuse.
This force Measuring Cup PC - 00003 contains Material : Plastic lid is attached and the lid closes tightly but I do not keep liquids thought by any chance.
Material : Since it is Plastic, it is not strong enough, but this powered Measuring Cup PC - 00003 is sufficiently useful as a 30 cc Measuring Cup and it is very inexpensive so purchase multiple items and make Small items etc etc etc etc. It is a very convenient container to classify it.
As for this mechanized Measuring Cup PC - 00003, it is inexpensive because it was lightly sealed so as to put a small thing in it, so this Measuring Cup PC - 00003 has a sufficient function as a Measuring Cup for small quantities As we are doing it will be a product of Recommendation in any case.
Moreover, it is a cheap product so it is very easy to purchase.
I made this power Measuring Cup quotient Product No : PC-00003 <Container Quantity : 2pc. I purchased Set>, but Quantity : 2pc. Set was a bit less, so I'm thinking about buying more on my next shopping.
This powered Measuring Cup quotient Product No : PC-00003 does not transform deformed even when used for Gasoline and its additives and engine oil as well as Brake fluid, and for Lacquer thinner and Parts cleaneretc. It is Measuring Cup which lasts long lasting Large even if it rinses with.
.
View detail
Use of hang
It is weaker than Vinite, but it is not sticky due to deterioration and it is used every time for Wiring bundle and Col Gate terminal processing.
We do not pull the winding end but give the Tension and if the winding is not done the terminal will float immediately.
Once it floats it will be hard to reattack so it is best to repair once more and prevent lifting.
It is thin and stretches, but as it stretches, the adhesion drops extremely, so please be careful.
View detail
First purchase
I have never done Wiring before, but since Grip is spinning, I bought it quickly.
We purchase it together with Auto Return-type Wire Twister Pliers of Weiggarage and immediately Wiring.
Wiring by referring to the video site etc. Warning, Axel side does not understand the addition / subtraction and overtightening excessive return incidents worsened.
Redo and manage somehow.
Face White When it wears variously Wurring, if the product finishes in an instant.
It's fine if you use only a small amount for Grip, but if you want to use it else, you'd better buy other goods with a lot of quantity.
In fact, later I wanted to wire other Motorcycle grips, eventually I decided to buy a lot of products.
View detail
It is only a syringe
Although it seems that various images are attached, the quotient ProductNo : ABX7 - S1 is only syringe.
I used it to exchange Fluid.
There is a possibility that you may swallow when you suck Hose,
It's safe, is not it? W
The price is as expected KTC. It is quite easy..
It seems to be long, so I am 3..
View detail
ETC installed.
【What made you decide the purchase?】
I could not install the ETC Mount's Bracket, I wanted to simply attach the ETC to the vehicle and bought it.
【How was it actually used?】
The place to paste was bad..
I pasted it on the reservoir tank lid of Brake fluid, but when I exchanged Fluid I leaked Fluid and the double-sided tape on the back of Magic tape has come off.
ETC was taken off by wind pressure while driving on expressway.
[Is there anything I was disappointed about?]
There is none. , But the intensity of Double-sided Tape affixed is not good
【Hope for Manufacturer - Please let me know if you have any improvement points]
I want Super Strong Double-sided Tape.
【Have you compared items?】
There is none.
View detail
It became hard to spill.
Until now, Oil was received at the BOX of the pla, but when transferring to a separate container of waste oil processing, there were many cases that it spilled on Sheng Large, but the Oil pan with Nozzle got less coarse Was.
By the way, us Oil amount at ZrX 400 : 3. 2L (Remove Filter) is.
Products are 3. I use a 5L capacity item, but when I receive an Oil it will accumulate up to 3 to 4 centimeters from the top.
Even if you lift the product by receiving Oil as it is, the container is solid without deforming.
Just when we process waste oil, wide mouth like shochu Plastic bottle (4L) I moved it, but carrying it is regrettable that Nozzle does not fit in my mouth ,,, I expect it to improve without using a funnel.
View detail
I can go without it, but it is convenient if there is any
Until now I was using Measuring Cup, but I bought it.
I think that there is only Fork oil position as measurement of the amount of oil in the maintenance of the motorcycle, so I think that it is slightly expensive to think only for that.
I think that things are well done.
Although it is not in the photograph, it comes with a removable pedestal and it is properly self-sustaining, and the thing that makes me glad is Cap with effective for invasion of Dust at the time of storage.
Although I do not understand the precision of the scale well, in the case of Fork oil finally the amount of oil level adjustment is finally eliminated, so there was no particular problem.
View detail
It's easy to use, but the price is - - -
Since it can be stabilized even if Oil is put in, it has a sense of security and it is very easy to enter even when put in Fork.
Since Rubber cap is also attached, there is no worry of Garbage and it is safe.
Just Material : I think that the price is a bit too high for Plastic's price.
View detail