Reviews
For terminals of 4.0sq cord for charge current
I bought a battered 900SS (900SL) and am Restore.
The harnesses are also in bad shape, so we cut and re-created the damaged parts of each section.
The very thick wire for the Starter motor and the carburetorTire wire connecting the Engine and Chassis are also deteriorating over time and are crumbling and falling apart.
The internal core wire was also corroded by moisture that had entered the wire and was spewing GreenBlue, so it was re-created.
After the terminals are crimped with Electric Works Pliers, solder is applied to the terminals for secure wiring, and these terminals are protected with Shrinkable Tubes to prevent shorts.
The tube is coated with an adhesive that melts when heated and shrinks to make it Completely Waterproof, preventing moisture from entering the cord through the terminals.
It also serves as a Cover for the terminals, so using different colors of this Shrinkable Tube (Red and Black) helps to prevent accidental wiring.
It is especially effective when used in the terminal section that conects directly to the Battery terminal.
Φ9.5 is quite thick for Motorcycle wiring, so there are not many uses for it, but it is ideal for terminal protection for Starter and Earth.
Although it is possible to purchase a similar product at a wiring store at a much lower price, considering the time and effort required to go there and the use of multiple mail order sites, I think it is most cost-effective for ordinary people to buy a DAYTONA product at Webike, even if it is a little more expensive.
View detail
Purchased for the Wiring branch that does not take up Space!
I bought it for the Wiring branch!
It is convenient for Wiring branching that does not require soldering and does not take up space!
View detail
For homebrew
DAYTONA sells Headlight RelayHarness, though,
I wanted to make a Bullet Terminal for Wiring and Honda in OEM colors and a Layout to fit Relay in the Tool Case.
I made my own Harness utilizing this for RepairRelay.
It is well made and Switching works fine.
I gave it three stars because it may not come into play during the optical axis light intensity test for vehicle inspections, and I am not sure of its durability.
View detail
Good quality but too much import taxes
About quality and texture : Very good quality About shipping and packaging : I bought for 31€ of parts and got 31€ more for import taxes : total 62€ for 10 pieces. It doubles the final cost and it must be considered before ordering... View detail
for Replacement
Relay on headlight relay kit suddenly broke
Purchased two Relay replacements because it's not a Wiring problem.
The product is an ordinary product with no negatives or positives.
I replaced the Relay so I can use it safely for the time being.
View detail
Good quality but...
The parts are good quality ones, but the import tax doubles the price. In my case : about 31€ for the parts + 31 € for the tax. To consider before buying. View detail
DAYTONAIncluded Parts:Connector required as
I have Repeat several times, but the Bracket is soft and difficult to connect firmly even with Crimp.
However, when using DAYTONA-related equipment, including Charger, it has become an indispensable Connector.
View detail
Easy to charge
Purchased an additional Motorcycle.
It is convenient to keep Charger connected during the non-riding winter months!
Charger does well these days, just plug it in and it's good to go!
View detail
Effective
I purchased this for a power supply for a Grip heater that is attached by wrapping it around.
In the summer, I remove the Grip heater, so I use this Connector for One-touch power supply.
The waterproof specification is safe and secure.
The terminals are small and can be damaged if you are not careful when crimping through wiring.
View detail
Constant replenishment
It would be useful to have it at the three-way junction.
Until now, we have cut off the head of the Bullet Terminal and substituted it with the Crimp section.
View detail
Cosmetic Items for DIY
[How is it used?
I purchased DAYTONA's Power Unit D-UNIT+ for my XJR400R.
In this process, the stag beetle terminals were modified to Round Type Terminals, and Heat Shrink Tubes were used for waterproofing and terminal protection.
How was your experience with it?
The product was easy to use.
I didn't have a heat gun, so I used a Chuckerman to apply heat, but the shrinkage was firm.
The quantity is so large that I don't think we will run out of it in the foreseeable future.
How did it compare to other products?
Some products are sold as a single item in 6cm increments, but this product is easy to use because you can cut it to any length you like. Also, the package itself plays the role of reel, so it is easy to store.
[Points to note]
It does not have a clear waterproof effect, so care should be taken where it is used.
Also, the shrinkage rate is not that high, so choose the Size according to the actual Wiring you will use.
One concern is that the package is larger than expected, making it somewhat bulky when stored.
View detail
Easy to use
[How is it used?
The Heat Shrink Tube I had on hand went somewhere, so I bought one.
I chose this product because it is a sizeφ3.2mm, which is often used in Wiring, has a length of 3m, and is relatively inexpensive.
How was your experience with it?
The required length can be taken out and used immediately.
Heat gun (or writer) The work can be done easily by anyone who has
Shrinkage is not a problem, and Wiring looks great, so I recommend it.
[Points to note]
What is ReelPackage? I was wondering, but you can use it without taking it out of Package.
I opened the Package once without understanding, but please be careful if you are going to use it in the future.
How did it compare to other products?
I've been using it for a while now. (probably Emon's). There was no particular difference between the two.
It is long enough for amateur DIYers, so it is nice to not have to worry about buying more.
【Review】
It is easy to use, long enough and cost-effective.
If you are processing Wiring yourself, you should have one to make your Wiring look better.
View detail
It uses, when changing the present blinker a hazard and with a position.
It uses, when changing the present blinker a hazard and with a position. View detail
Quality of the Wiring process jumps up.
When tinkering with the electrical components on the Self, one of the things that tends to get ugly is the insulation on the terminals that are used naked, such as the Bullet Terminal.
I think it's more Large ? to wrap Vinyl Tape around it and be done with it.
Of course, if you use a proper Vinyl Tape, there is no problem functionally, but I think that it often peels off and becomes stained after a long time, and above all, when you look back at it later, you feel disappointed with the handmade feeling.
That's where Heat Shrink Tube comes in.
It can be used to insulate exposed parts of terminals and wires, or to bundle a small number of wires for a dramatically more beautiful treatment.
If you go out with care, you can even create an OEM-like atmosphere.
Heat Shrink Tube itself can be obtained cheaply at Amaz◯n, etc., but this product is
Reel Sales
With adhesive
This is a feature of the system.
It is Merit to be able to cut it to any length you want, and above all, the effect of the adhesive increases the waterproofness when it is used to protect the exposed part.
To be honest, it's a bit pricey considering the amount of product that Sun Machine Level can't seem to use up, but I think it's an excellent functional product for that.
By the way, there is a method of roasting it with a lighter to contract it, but I recommend the use of the heat gun which is basically easy and certain.
View detail
For Ducati's MOSFETs
I bought it to convert my Ducati regulator to MOSFET, which is said to be easy to puncture.
I didn't want to modify the OEM body side harness, so I used this Coupler.
I must have had plenty of Model 110s on hand, but I couldn't find any 3-poles, so I was forced to buy one.
Type 110 Coupler was used for Generator side Connector of Regulator.
By the way, Battery side is 250 type 4-pole reverse lock.
I don't remember whether I used TAB or receptacle, but I was able to complete the MOSFET conversion successfully.
I only use one of them because I made use of the Harness and Coupler on the body side, but if it's only 300 yen, it's ok lol.
It is not this product, but if you can increase the Color variations a little more to the OEM Color Harness avs2.0 that the same DAYTONA has Lineup, you can completely align the OEM color, so I expect the Color variations addition.
View detail
Used for MOSFETs in Regulator
I bought it to convert my Ducati regulator to MOSFET, which is said to be easy to puncture.
I didn't want to modify the OEM body side harness, so I used this Coupler.
I don't usually use anything other than the 110 Coupler, so I looked for it quite a bit, but I didn't expect it to be so close by…….
I can't believe DAYTONA even has these in their line up.
Type 250 Coupler was used for Connector of Battery side of Regulator.
Since the coupler on the body side is alive, either TAB or receptacle is left over. (I've forgotten which one.) 。
Generator side is 110 type.
I would like to prepare a Harness of about avs2.0 because large electricity flows to a certain extent, but the OEM Color HarnessSeries of DAYTONA was a little short of color variations.
I gave up because it's not visible and it's Couplet-on so I can't make a mistake.
It's a bit frustrating to pay 500 yen to use one half of the Coupler, but I'm grateful for the lineup.
View detail
Used in License Plate LightWiring of WR250X
I used it with License Plate LightWiring.
For WR, the Brown wire on the body side was Plus and the Black wire was Minus.
I used it in connection with Y's Gear's Fender Eliminator Kit.
It can be connected without damaging the Wiring on the vehicle side.
View detail
You can connect and charge Battery with One-touch
I have posted before (https://imp.webike.net/article/0419666/) about the product that is the subject of the impregnation, but when I posted the impregnation Type of vehicle used (installed) column now appears, I'm reposting the Impreza with the vehicle type used set.
What made you decide to buy?
(I didn't buy the product (it came with the Battery Charger, which I will discuss later)
How was your experience with it?
It's a very convenient product because you can connect and charge the Battery with One-touch (TwoTouch if you include removing the dustproof Cap?) (Quantity):(See 1pc. eye post pics)!
In addition, the company's USB power supply (https://www.webike.net /sd/21440311/), but the Honda Sub harness ( (https://imp.webike.net/article/0363139/) and connected to the ACC power supply
You can also connect directly to Battery by using the in-play products (2nd post) (See photo)
By doing this, you don't have to turn on the main switch in an emergency It can be used to charge a cell phone from a motorcycle, for example
Was the installation difficult?
If access to the battery is not difficult (like Seat and If you don't remove the cover etc.), you can use the existing Power Cord on the Battery terminal It is easy to install, since all you have to do is to tighten it together with the
For the 400X, the installation was easy as you can easily Access the Battery by removing the Seat using the key (see the third posted photo).
【Please tell me the installation point and hang】
When not charging, the connection Coupler is pushed into the gap of the Seat frame (Quantity:1 Set of 4pcs. (See the photo posted in the eye)
However, the Coupler comes with a Cap, but you can find it on the company's website (https://www. daytona.co.uk/products/single-71637-genre) if you look at it In fact, put it in a place where it won't get rained on (Perhaps that's why the product name is "With a waterproof cap not "With a dust cap In case of rainy weather, the Connection Cord is stored under Seat
[Was there anything that disappointed you?
Temperature is lowMaterial:When the Rubber's Dustproof Cap is hardened, it can be difficult to remove the Cap from/attach it to the Connection Coupler.
In that case, I remove and install the Dustproof Cap while inserting the Slotted screwdriver.
[Was the Instruction Manual easy to understand?
(Omitted since I didn't buy the product.)
[Included Parts:were they on?
(Omitted since I didn't buy the product.)
Do you have any wishes or improvements you would like to make for the Manufacturer?
I would like to see the dust cap on the connection Coupler improved so that it can be easily removed and attached even when the temperature is low.
I also hope that the price will be lower than the following USB power supply
[Do you have any products to compare it to?
・DAYTONA：Motorcycle Power Supply USB 1Pot
(https://www.webike.net/sd/22060420/)
The Connection Coupler used in this product is the same as the one used in the product in question It is the same shape as the Connection Coupler
Because the price is cheaper here, if there is a use of the USB terminal side, I think that it is good to buy here.
DAYTONA：Display Battery ChargerRepair item Body Connection Harness
(https://www.webike.net/sd/22060427/)
The connection coupler used in this product is the company's "Display Battery Charger Other than (https://www.webike.net/sd/21922914/) Charger and USB power supply (https://www.webike. net/brand/177/series/21942/), the connection used in Note that the shape of the coupler is different from that of the coupler and cannot be connected to them
[Others]
The company's "SwitchingBattery charger 12V (https://imp.webike.net/article/0419564/) It comes with 1pc. of in-play items as Included Parts:
If you own more than one Motorcycle, it would be a good idea to purchase the amount you need.
View detail
Daytona Blinker Connector
Blinker connector for turn signals from Daytona. I bought myself on YAMAHA YZF R1 RN12 05. Because I have a motorcycle of the American version, there is a turn signal connector for three contacts. In my original connectors, the hooks are broken. After replacing all the connectors, everything started to work well. View detail
Daytona Kawasaki
I bought myself a used Kawasaki motorcycle. After the purchase, after some time, the rear turn signal stopped working. After diagnostics, it turned out that the old owner tore off the connector on the right rear turn indicator after the accident. I had to order a new connector from Daytona. This is a great connector. It installs quickly and easily. It is very similar to the original one. I recommend this product. View detail