Reviews
Good quality but too much import taxes
About quality and texture : Very good quality About shipping and packaging : I bought for 31€ of parts and got 31€ more for import taxes : total 62€ for 10 pieces. It doubles the final cost and it must be considered before ordering... View detail
Easy to charge
Purchased an additional Motorcycle.
It is convenient to keep Charger connected during the non-riding winter months!
Charger does well these days, just plug it in and it's good to go!
View detail
Constant replenishment
It would be useful to have it at the three-way junction.
Until now, we have cut off the head of the Bullet Terminal and substituted it with the Crimp section.
View detail
For Wiring
In order to perform Wiring, this item is also available in Quantity and Quantity:1 Set of 10pcs., Insulated Sleeve set, I bought it because the price was reasonable.
The Package is in good shape and seems to be crimped and ready for use.
But MEDE. IN CHINA.
View detail
For Wiring
I bought this one because of the number of pieces to do Wiring, with Cover, and the low selling price.
Wiring is simply crimped and connected, so it looks Large sturdy, but MADE IN It looks like CHINA.
View detail
Purchased with Sponge sheet
When repairing an OEMOption engine slider, we decided to replace the sponge that comes in contact with the cowl because it had also deteriorated. The thickness of the double-sided tape is 0.4mm, including the backing paper. 0.4mm
After making a base paper and cutting it out of Seat, I tried to stick Double-sided Tape to Sponge Sheet, but the adhesive strength was weak and it peeled off easily. I tried applying pressure with my fingers to make it stick, but when I peeled off the other side of the backing paper, the double-sided tape body also peeled off. The thinness of the double-sided tape also makes it easy to gap, and the double-sided tape will overlap, so please be careful when handling it.
After attaching it to the engine slider, we left it for 24 hours until it was fully adhered. After that, when I touched it, it was firmly adhered, so I felt relieved for the time being. Immediately after bonding, the adhesive is not stable. Please allow enough time for the adhesion to be stable.
View detail
Convenient
I used it in the Wiring retainer to avoid Short when processing Wiring.
Installation is easy as it shrinks when heated in the Dryer.
It will look good and finish as if a PRO had done the work.
View detail
Easy to use
I bought this for use with ETC and electrical installation.
If you buy one, you can use it for a while because of its length.
There are several different thicknesses available, so it is recommended to buy several different types for different uses.
View detail
Crimp to the base of the terminal.
For Bullet Type Terminals in locations where it is difficult to use a Tube Type Protection Cap, it is used only at the root.
It is really only a little bit long enough, so there is enough to use up even this amount.
I don't have anything specific to mention, but I heard that when shrinking, it is better to apply a quick Blue flame with something like a CompactBurner, instead of applying a flame as low as a lighter.
View detail
Don't expect too much.
It will be Motorcycle's Extra Grounding.
It is said that the flow of the ignition system is made smooth to increase the power.
I bought it out of curiosity, but Extra Grounding is very much a Brush-boo.
good point
Idling and starting will be Smooth.
Torque up can be felt naturally.
Replacement is easy.
A bad point
Dramatic changes are scarce.
It may be better to think of it as a part that improves the condition of the individual rather than Power. Because it doesn't become bad by installing it.
View detail
For Ducati's MOSFETs
I bought it to convert my Ducati regulator to MOSFET, which is said to be easy to puncture.
I didn't want to modify the OEM body side harness, so I used this Coupler.
I must have had plenty of Model 110s on hand, but I couldn't find any 3-poles, so I was forced to buy one.
Type 110 Coupler was used for Generator side Connector of Regulator.
By the way, Battery side is 250 type 4-pole reverse lock.
I don't remember whether I used TAB or receptacle, but I was able to complete the MOSFET conversion successfully.
I only use one of them because I made use of the Harness and Coupler on the body side, but if it's only 300 yen, it's ok lol.
It is not this product, but if you can increase the Color variations a little more to the OEM Color Harness avs2.0 that the same DAYTONA has Lineup, you can completely align the OEM color, so I expect the Color variations addition.
View detail
Used for MOSFETs in Regulator
I bought it to convert my Ducati regulator to MOSFET, which is said to be easy to puncture.
I didn't want to modify the OEM body side harness, so I used this Coupler.
I don't usually use anything other than the 110 Coupler, so I looked for it quite a bit, but I didn't expect it to be so close by…….
I can't believe DAYTONA even has these in their line up.
Type 250 Coupler was used for Connector of Battery side of Regulator.
Since the coupler on the body side is alive, either TAB or receptacle is left over. (I've forgotten which one.) 。
Generator side is 110 type.
I would like to prepare a Harness of about avs2.0 because large electricity flows to a certain extent, but the OEM Color HarnessSeries of DAYTONA was a little short of color variations.
I gave up because it's not visible and it's Couplet-on so I can't make a mistake.
It's a bit frustrating to pay 500 yen to use one half of the Coupler, but I'm grateful for the lineup.
View detail
Appearance Refreshing
Refreshing and easy to use. Parenthesis is a good looking and satisfying product that prevents the wiring cord from being damaged. View detail
Useful to have if you do Harness processing.
[How is it used?
I purchased the product because I had plans to modify the Harness on my vehicle.
Harness tape would be nice, but it tends to unravel over time and looks bad, so I like to refreshing it as much as possible.
Was the one you received as per Image?
It is as Image. On the other hand, is it more difficult to receive a product different from Image?
How was your experience with it?
As you can see in the image, the shrinkage does not change depending on the manufacturer, so there is no difference in size.
Whether it is easy to use it usually by being Reel-shaped, or whether it feels easy to use the product which is Cut at intervals, etc. which is sold by the Large amount of Amazon, I feel that it is each person.
[Points to note]
You have to cut and use it, so if you don't cut it systematically, you will waste money.
If you're not too confident with the Harness process, you might as well use the already Cut one from Amazon.
How did it compare to other products?
There is no difference more than it is Reel shape. I wrote an impression, but there is nothing more special.
View detail
Cheap is justice
Basically, this is what I wrote in PROTOOLS Professional tools Bullet Terminal Male.
Are there people who have different Impressions in Male and Female?
If I had to say, I'd say that Female is the larger of the two, so it's easier to pick up.
Please add a section for pinchability to the detailed evaluation and such.
[How is it used?
I need it for Wiring teasing, so I decided to stock a lot of it anyway and came across this product.
Was the one you received as per Image?
It was as shown in the Image. Conversely, is there a Pattern that is not as Image?
I didn't count it, but it seemed to have a volume of 100 units.
How was your experience with it?
If there is an impossibility, it is Large strange, but there is also no impossibility.
How did it compare to other products?
Bullet TerminalQuantity, which used to be included when you bought Electric Works Pliers made by Emon.:I was using Set.
I'm not sure if this is a good thing or not, but I think it's a good thing.
Still, I appreciate the price for 100 pieces.
I will buy the next one.
[Points to note]
Even if it is the same 4mm size, it may be a little loose when you try to connect with other company's Bullet Terminal.
If you can afford LEAD lines, you might want to unify them with those made by Professional tools.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
Items to buy together
Electric Works Pliers. On the contrary, why did I buy it without this?
View detail
I was attracted by the price.
[How is it used?
I need it for Wiring teasing, so I decided to stock a lot of it anyway and came across this product.
Was the one you received as per Image?
It was as shown in the Image. Conversely, is there a Pattern that is not as Image?
I didn't count it, but it seemed to have a volume of 100 units.
How was your experience with it?
If there is an impossibility, it is Large strange, but there is also no impossibility.
How did it compare to other products?
Bullet TerminalQuantity, which used to be included when you bought Electric Works Pliers made by Emon.:I was using Set.
I'm not sure if this is a good thing or not, but I think it's a good thing.
Still, I appreciate the price for 100 pieces.
I will buy the next one.
[Points to note]
Even if it is the same 4mm size, it may be a little loose when you try to connect with other company's Bullet Terminal.
If you can afford LEAD lines, you might want to unify them with those made by Professional tools.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
Items to buy together
Electric Works Pliers. On the contrary, why did I buy it without this?
View detail
Fits: SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI Address V125S, SUZUKI Address V125S
Poorly made.
I was relieved to install and use it as a KN project product, but
The engine stops suddenly while the car is running.
When the power went out, I checked it out.
The connection between the Cable and round terminals (Crimp) was lax and Cable was missing.
I was worried, so I checked the Crimp part of all four locations.
All of them were lax on Crimp, and when I pulled them, Cable was missing.
I fixed Crimp and used it myself.
If you are going to install it, you should check the Crimp part.
View detail
I bought it to divert the terminals.
This one didn't fit the size feeling either, so I gave up using it.
Color for sale at After:Gray's Coupler is a bit of a rarity.
The quality is not a problem at all, and I would recommend this product to anyone looking for the right application.
View detail
Fits: DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200S Touring, DUCATI Multistrada 1200S, DUCATI STREETFIGHTER848, DUCATI Scrambler Classic, DUCATI Scrambler Full Throttle, DUCATI Scrambler Icon, DUCATI Scrambler Sixty2, DUCATI Scrambler Urban Enduro, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD939, DUCATI MONSTER 797, DUCATI MONSTER 1200S, DUCATI MONSTER796, DUCATI MONSTER696, DUCATI MONSTER1100EVO, DUCATI MONSTER 821, DUCATI Multistrada 1200, DUCATI MONSTER1100/S, DUCATI MONSTER 1200
Female side
I bought this product because it's a Ducati for BlinkerPlug, & rdquo; Female side” was
I couldn't use it because I needed to use the Male side..
I couldn't tell if it was Male or Female from the picture, so I bought it and removed it I did
You may want to indicate whether you are Male or Female in the product description, include a clear product image, or improve the product We would like to ask you to do so
View detail
usually
I installed it in V-TWIN MAGNA.
Those who are riding CruiserType need to purchase Screw which is separately about 5 mm longer than Screw attached to Switch. I received a switch of Push type which is different from infamous one.
There are parts where the terminals are female parties, or they do not correspond to LED etc. Sweetness of design and age of design stand out. Well, if you are a person who wants to attach this, it will have about Crimp Tool and it will not be a big problem. However, those who are considering changing to LEDs may be better products to avoid.
Although it may be natural, Front does not blink on a vehicle whose Front Blinker is Position lamp. Just the light will become strong and weak. That said, I like it, but it may not be good on the original legislation. Blinker's Indicator does not blink, and depending on the vehicle, there is a possibility that it can not be said that there is no problem with pounding.
View detail