Reviews
Daytona Blinker Connector
Blinker connector for turn signals from Daytona. I bought myself on YAMAHA YZF R1 RN12 05. Because I have a motorcycle of the American version, there is a turn signal connector for three contacts. In my original connectors, the hooks are broken. After replacing all the connectors, everything started to work well. View detail
Daytona Kawasaki
I bought myself a used Kawasaki motorcycle. After the purchase, after some time, the rear turn signal stopped working. After diagnostics, it turned out that the old owner tore off the connector on the right rear turn indicator after the accident. I had to order a new connector from Daytona. This is a great connector. It installs quickly and easily. It is very similar to the original one. I recommend this product. View detail
Cheap and easy to use
It is a product that can protect Custom and Wiring easily just by cutting and covering.
You can also choose the size that you want to wear because you can choose the thickness.
I bought it to make a Handlebar Switch, but I can cut it with normal Scissors and it is easy to process.
It's just a tube, so depending on the Ideas, you may be able to use something other than Wiring through it.
The product description said it was heat resistant and fire resistant, so I roasted the remainder of it with a lighter, but the color changed a little, and it didn't burn or burn, and it wasn't even deformed!
This may be the most user-friendly Material you'll ever see for the price!
View detail
Emon for electrical work.
Emon, Emon! (Mysterious)
Really Emon!
That's all.
View detail
Sufficient performance
The curing of the Bullet Terminal stopping part which does not come off, I used it not very correctly.
It's not right, but it stops well and provides waterproofing and insulation.
If you burn it too much, it will melt off, so be careful not to overdo it...
View detail
Stable Dr. Emon.
I often use the Shrinkable Tube when I tinker with the electrical system. View detail
Very good
I bought it for FUSION. I liked the way that the original blinker relay can be inserted into blinkerWiring. Then, only the explanation of the Front side was written in the Instruction Manual? The text says it flashes 4 lights, Wiring is also only for Front, Switch and Power, FrontOne Side only and Switch, Power is on when I connect it to the power, Switch is on, Rear is also flashing when I turn it on, and Indicator is also flashing! I'm impressed! If there is a word in the description of the product, people will be more inclined to put a Hazard label on it. View detail
Installed in FUSION. I'm pleased with it.
I installed it on a FUSION model 2 before it was resold.
There is no hazard function in the OEM.
There is a position, and it is a model year with headlights on and off.
The Switch that came with it wasn't the one pictured.
The on/offButton attached to the Handlebar can be used independently of the
It was the one that came with it.
To install, add the included Relay and Wiring.
Therefore, if you turn Hazard on when using Blinker
The two Relays work and turn into a mess of lights.
If you greet the following vehicle with a Hazard, you need to turn off the blinker once and turn on the Hazard. Also, we have converted the rear blinker bulb to LED, but
It doesn't even become a high flasher and flashes appropriately.
It is now possible to appeal to the following cars conveniently when stopping for a short time.
The FUSION exclusive Hazard kit is not available on the market, so using this kit is another option.
View detail
Waterproof!
Blinker was used to make Wiring around the Front of WR250X. I changed to this preventive coupler for safety reasons.
The point that the Coupler's insertion and removal of the Coupler itself is Large strange is a little Large. MinusPoint, but nothing beats safety.
View detail
Where you want to Waterproof!
It was used at the time of Number Plate conversion & rarr;Fog Lamp of WR250X. Around the Headlight & along with Number Plate conversion, Wiring is further rain and wind. It's safer to go Waterproof because you'll be exposed to it.
Since the coupler is larger than I thought, it is installed in the part where there is room for space. It's better.
View detail
YAMAHAConnector
The same thing as that of the OEM
Other Brand ProductIt's useful for attaching tail lamps and other products
Requires separate Crimp Tool from ConnectorCrimp
In the past, the OEM body side Connector was replaced with a Bullet Type Terminal If you have this, only Other Brand Product Light side will be It's easy to revert back to OEM because you can just replace it with the Connector
View detail
It always comes in handy
The DAYTONA Connectors are useful for DIY processing
This is also used to replace the MT-07's Blinker with an LED one
It's also important to be able to return to the original state, and most importantly, to ensure the same maintainability as the OEM I always prepare the Connector even if it costs Cost because it's easier to maintain later
1 point, it would be helpful if you could lower the unit price by selling TAB and receptacleRose if possible It is
View detail
Useful for OEM diversions
MT-07First Model Type with Second Type Model I used it to divert Headlight
PositionThe position sphere-bound Connector is different in the front and back periods, so this is a conversion I made Harness and sandwiched it between them
The easy availability of these things is helpful for DIYers who want to put them together nicely
View detail
The same color is good
It's easy to understand because you can wired in the same color as the OEM
The wiring situation is used without any problem at all
It was long enough for me
View detail
Good
I use it for repair my wire connection. The original one is old and rush already. So I change it . And then everything work after I change it. Good View detail
Best
I use this to protect the wiring when I re-pull or add to it It's soft and easy to use and the finish is the same as the OEM, etc., or better I would like to RECOMMENDATION this instead of GRUGRU wrapping the vinite View detail
Good
I but it because i want like to change the light of my motobike, but the original one is not suitable, so i buy this connector hope it can suitable for my bike. the codition is good. View detail
DAYTONA Blinker Connector 040 (3-poles)
I want to share a review of the purchased product. I bought 1 pair of connectors to repair the damaged wiring on the Yamaha R1. Installation was quick and without any difficulties. The quality of the goods is excellent, as is the case with the original parts. I will buy more and recommend it to everyone. Do not regret what you buy for your motorcycle. I wish the seller success and all the best. Thank you . View detail
Fits: Others , KAWASAKI GPz1100, KAWASAKI Z1-R, KAWASAKI Z1000 A1-A2(US), KAWASAKI Z1000 MkII, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z1100 R (US), KAWASAKI Z1100GP, KAWASAKI Z750-D1 (KZ750D)
It is easy to install..
This time I bought for Twin lamp. Although it was bright, it was bright though it was bright but it was slightly unstable so I thought about making it myself, but when I found this exactly and purchased and installed it was stable. I am satisfied. View detail
3pin
Great quality, lots of packaging. I like. Thank you :) Excellent quality, lots of packing. I like that. Thanks :) View detail