Reviews
Handlebar position changed, brake hose length increased.
The handlebar position of the Yamaha Bolt R-Spec is too far away, so I used the Handlebar Riser 2 Inch and installed the STD Handlebar. (Switch holes in place as they are) 、 2-inches (approx. 5 cm) I brought it to the front, and Position became much easier.
If the handlebar position is moved forward to the 2-inches maximum, when the handlebar is turned to the full Left position, the brake hose (and Accelerator cable) is fully extended and there is no room to spare,
Replace Brake hose with a longer one
・Brake hose joint (this product) Installation
and finally installed this product.
(At the same time, the Accelerator cable was replaced with a 15 cm longer one. HURRICANE:HB6471)
This product is a Joint between Reserver tank and Hose.
Air bleeding of the brake hose is required when installing this product.
This Joint is a Universal Product, so it can be used in a wide range of applications.
I would like to use it in this condition for the time being.
At any rate, the problem is solved and I am satisfied.
View detail
Fits: HONDA FTR223, SUZUKI ST250 E type, SUZUKI ST250, SUZUKI GSR400, KAWASAKI ZRX400, HONDA monkey, HONDA Ape 50, HONDA Ape 100, HONDA NC700X, HONDA NC700S, YAMAHA TW225E, YAMAHA TW200E, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI W800, KAWASAKI W400, KAWASAKI 250TR, HONDA HORNET250
Perfect hole drilling
[How is it used?
Used to drill switch box preparation holes in universal handles
phi& phi;5mm.
Was the one you received as per Image?
Fairly solid construction
How was your experience with it?
The hole was drilled perfectly in the desired position.
[Points to note]
High prices….
It's not something I use that often ….
How did it compare to other products?
Unknown, never used another company's.
Some other companies' products are a little cheaper,
Is there any difference as far as performance…?
View detail
Regular M8 Bolt but no replacement.
The Bolt that the previous owner was using was old & probably Overtorque'd, so I replaced it with a new one before it broke. It is stainless steel, so it must not be Overtorque. View detail
Fits: HONDA FTR223, SUZUKI ST250 E type, SUZUKI ST250, SUZUKI GSR400, KAWASAKI ZRX400, HONDA monkey, HONDA Ape 50, HONDA Ape 100, HONDA NC700X, HONDA NC700S, YAMAHA TW225E, YAMAHA TW200E, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI W800, KAWASAKI W400, KAWASAKI 250TR, HONDA HORNET250
Quality tool
As always the package reached on time. Tool is very light and serves it purpose. Quality and craft of tool is great and will stand for a long period of time. Great product and recommended to have. View detail
Fits: HONDA FTR223, SUZUKI ST250 E type, SUZUKI ST250, SUZUKI GSR400, KAWASAKI ZRX400, HONDA monkey, HONDA Ape 50, HONDA Ape 100, HONDA NC700X, HONDA NC700S, YAMAHA TW225E, YAMAHA TW200E, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI W800, KAWASAKI W400, KAWASAKI 250TR, HONDA HORNET250
I can make a perfect hole.
When I tried to make a hole without using Hole Guide before, I couldn't make a hole well, but I can make a hole well by using this Hole Guard. View detail
Convenient Hose
Introduced because OEMHose is not long enough for the Clutch master change.
It is a grateful product that lowers the threshold of MASTER exchange at once.
Eventually, I'm planning to redo MASTER to Release, but for now, I'll go with this.
View detail
Fits: HONDA FTR223, SUZUKI ST250 E type, SUZUKI ST250, SUZUKI GSR400, KAWASAKI ZRX400, HONDA monkey, HONDA Ape 50, HONDA Ape 100, HONDA NC700X, HONDA NC700S, YAMAHA TW225E, YAMAHA TW200E, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI W800, KAWASAKI W400, KAWASAKI 250TR, HONDA HORNET250
It's good
It's good for when you want to get the Handlebar out a bit earlier.
I thought it was strong and solidly built.
So far it has worked fine.
View detail
Fits: HONDA FTR223, SUZUKI ST250 E type, SUZUKI ST250, SUZUKI GSR400, KAWASAKI ZRX400, HONDA monkey, HONDA Ape 50, HONDA Ape 100, HONDA NC700X, HONDA NC700S, YAMAHA TW225E, YAMAHA TW200E, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI W800, KAWASAKI W400, KAWASAKI 250TR, HONDA HORNET250
It's reassuring to have one
It is used for the installation of the company's Separate handle
It is easy to use
Merit
Drilling is easy to do
Demerit
Low cost of 3,000 yen for a single use
View detail
Large I'm strange
390 DUKE Bolt class Total replacement Custom.
Front fork's Clamp Total 8 places have been replaced.
By example OEM Bolt was rusted so replace it here and the gloss increased.
View detail
Fits: HONDA FTR223, SUZUKI ST250 E type, SUZUKI ST250, SUZUKI GSR400, KAWASAKI ZRX400, HONDA monkey, HONDA Ape 50, HONDA Ape 100, HONDA NC700X, HONDA NC700S, YAMAHA TW225E, YAMAHA TW200E, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI W800, KAWASAKI W400, KAWASAKI 250TR, HONDA HORNET250
In the case of the Handlebar of an external article, there is no hole open since a Switch box etc. are fixed (unless it is some exclusive elegance very much) for baffles to a pure thing. Although some people will cut off the projection by the s
In the case of the Handlebar of an external article, there is no hole open since a Switch box etc. are fixed (unless it is some exclusive elegance very much) for baffles to a pure thing.
Although some
people will cut off the projection by the side of a VOX with Nippers etc., this is a dramatically dangerous thing.
Although there is also a method of fixing with a Firmly with the polyester system adhesive bond of a 2 liquid hybrid model, when it is s, if a Handlebar is replaced again and it excels, naturally the whole Switch box will be called exchange.
When getting it blocked and replacing a Handlebar, it is necessary to process drilling using a Drill but, and if it is a product made from an Aluminum, the work which makes a hole in a Pipe vertically better about what has high rigidity is as difficult as unexpected.
Even if it is carrying out the Marking to the part to make the
hole in, once a Drill is slippery during work and a strike shifts, it will become next to impossible to add correction to the place aimed at once again from there.
If the
hole is extended, and a fixed meaning will not be accomplished and it will become so, about a Switch box, a compromise is reached in the bent position, or there is only newly rebuying a Handlebar.
It must be better to make appropriate investment rather than he repents without buying it, although it does not use frequently.
After fixing to a Handlebar with the 6-mm Hex Bolt in right and left, this product tightens lightly a central penetration Bolt (the hole of the diameter of 5 mm is open), and inserts a drill edge by considering that hole as a Guide.
Although many hours are firmly spent before
work and that it is necessary to carry out a Marking does not change, the drilling itself can be performed now certainly successful.
Since it is called the product made from
HURRICANE, it is a fly in the ointment that it is price setting out to the extent that a Handlebar can buy one more, but.
Since an equivalent device practically equal exists in user-friendliness at a half-the-sum grade or the price not more than it, I regard how to twist the prejudice to Brando as or enough with such goods.
View detail
which will be indispensable goods if a Wire grease is used -- ? having been thought if it did not enter since the loading slot of a Nozzle was very narrow when he thought that he will use this, but. With the disposal for carrying out this as [ l
which will be indispensable goods if a Wire grease is used -- ?
having been thought if it did not enter since the loading slot of a Nozzle was very narrow when he thought that he will use this, but.
With the disposal for carrying out this as [ leak / from a Nozzle / a Grease ], if a few is pushed as it was, will enter lightly and the loading slot of
, however the Wire which the leak also had will
Be a thing as which a Rubber may be sufficient, but.
It is better to lubricate wrapping in the
dustcloth or something to which some Grease leaks from the
loading slot, if a Spray is pushed strongly.
View detail