Reviews
Well than what you see in the picture.
To adjust the FrontPre-road,
I bought it because I didn't want to put Anodized on Wound.
Much more rugged than it looks in the picture,
It's a bit … to carry.
View detail
This thickness is good.
GlassesSpanner for Top cap was purchased at the same time, but Material:Plastic is good. No need to put Wound on delicate parts. I guess Technics, the SuspensionPro shop, has done a good job. View detail
PRO Tool.
This product is a must-have for O/H of inverted suspension. Technics' products are really safe and easy to use. View detail
PRO Tool.
This is a nifty tool from Pro shop Technics in Suspension, if you don't want to put a Wound on the Top cap. View detail
Necessities for Inverted Front Fork
The function and texture are sufficient. I am disappointed that it cannot stand on its own. The other thing is the price. If it were a little more affordable, I would have no complaints. View detail
Used for Overhaul of Front fork.
There is just a little bit of BALI on it, so it might be better to finish it with a light file before use. 。 It is made of Engineer plastic-like hard material, so it won't nudge Cap's head unless it is very hard to do so. View detail
Special Tool for CBR1000RRRSHOWABPFFork Disassembly
Special Tool for InnerCartridge removal of Big pistonFork. 90N tightening, so loosening is Large.
The Torque is tightened by hand and that's it. Why do you tighten it with such a stupidly strong Torque?
View detail
Special Tool during CBR1000RRRSHOWABPFFork disassembly.
Special tool required for removing and installing the top cap. octagonal. View detail
easy to use
Easy to use, Inverted Front Fork cannot be done by hand. View detail
This makes it easier.
I use it to rub the ROD and it is easy! View detail
XR1200X for Front Fork
Tool only for removing the top cap of the front fork.
Well, it's as close to SST as possible … or is it SST?
The texture is Cut-out and good.
I use it once a year or not.
View detail
I ordered it for use on a newly purchased vehicle.
While purchasing and installing tubeless wheels on a newly purchased vehicle CT125, tighten the spokes during initial break-in.
Purchased for a purpose. different sizes and torques
It can be adjusted and tightened, but the range of torque is different from other products, so it is suitable for use on spoked wheels for motorcycles.
I bought it because it has the best range and I use it well
there is. -------------------------------------------------- -------- Tighten the spokes when the newly purchased vehicle CT125 is purchased and mounted and mounted. Purchased for purposes. Various size and talk It can be adjusted and fastened. It has the best range, so I bought it and used it well there is. Powered by Google Translator
View detail
Inverted Front ForkMaintenance Essentials
If the spring is just under the fork cap, I could manage to shrink the spring by force, but if there is a collar under the cap, it slips on the oil and there is nothing I can do. I think it is a necessity when replacing the oil of this type of Inverted Front Fork.:Once set and positioned, you can shrink it with a ratchet or similar tool to reach the point where you can safely disassemble it in a matter of seconds. View detail
TGRNippleTorque wrench
It fits Nipple and is very easy to use. View detail
At least I could use it.
I used it on a GSX-S1000 FFork.
It may be too thick to fit in some other cars.
I was able to use it on GSX-S1000 FFork for now.
It would be easier to work with if it were a little thinner, but it would prevent scratches on the Cost and Fork side.
I wonder if this is what it would be like if we took it into consideration.
View detail
Safety is something you buy.
I used to use a homemade SST.
It was an extremely dangerous job.
It was dangerous and time consuming.
I thought it would be expensive, but I bought it.
If used in conjunction with Impact, the objective is achieved in seconds.
You should buy one if you're so worried about it.
This is especially true for those who use it many times.
This is a must-have for KYB inversions circa 2000.
View detail
The motorcycle dealer wanted it. I had no choice but to lend it to him.
This would be a super time saver!
I'm sure it's useless to Sun Machine, who feels his time is free.
If this Compressor has Impact, you'll be done in no time!
If you use it for O/H along with the red stick, you can maintain the Rose once a year.
Thanks for the special work? (^o^) /
View detail
Useful Items
Red and Cool (Lol)
I've been using a burr wire for a while now, and it's just so much more convenient to put it back in. (Lol)
Screw diameter is also 4Pattern, but it should not be used!
Do you use OHLINS or something?
What I'm trying to say is...
It means it's useful.
View detail
I think I can make it. I think I can substitute something.
BALI is BALIBALI, but I don't care about tools because ingenuity is a large thing.
All you have to do is file a
Other people wrote that Size doesn't fit, but I don't care because I just need to cut it down.
I'm sure someone will be selling imitations with 3DPrinter at some auction or Nanikari.
I think it's a good product.
View detail
I like the idea of a dedicated tool.
It is a hard Plastic Wrench
The color is also very nice, like a special tool.
In fact, even if you don't have it, there are alternatives, but a special tool is still a great motivator!
The atmosphere will be such that you can easily do O/H.
I want to Overhaul once a year from now on!
View detail