Reviews
Tightened with a slotted screwdriver.
Used to replace an oil line. It seemed to be able to close it with a hexagon, but it didn't fit slightly. I think it is a millimeter. View detail
Fits: HARLEY-DAVIDSON Universal
Voltmeters for Motorcycle
Although not particularly necessary, a voltmeter was installed since it is also attached to the car.
White light is also provided, making it easy to see at night.
KITACO for mounting on Mount bar (KITACO) Meter clamp set Motorcycleetc. 672-1126900, etc. required.
Other items in the photo are KIJIMAHandlebar Mount Bracket, Eye PRO ShiftIndicatorAPH8 Red, SP Mukawa Φ48Small DN Tachometer 12500rpm (with Rev indicator)
View detail
Inch bolt essential for Harley parts installation
I bought this to install parts on my 2000 XL883XL1200C SPORTSTER 1200. harley bolt nuts are inch size and are not sold at Motorcycle supply stores or home centers. I bought this from Quantity:It is very nice to be able to purchase it in 1 pc. This time, the purpose was to attach the DockingHardware to the Seat rail, but the back side is designed to screw directly into the Sub-frame, so the Bolt that is not an Inch Pitch can not be used. View detail
Fits: HARLEY-DAVIDSON Fits OEMCVCarburetor
No installation problems after a little sharpening.
The surface treatment of the slide valve seems a little rough, the OEM was the same, so no problem.
Because the negative pressure presses the Slide surface Rear against the sidewalls, especially the areas that are strongly hit are polished and shining.
If the corners and flat surfaces of the PAL blade wings are polished with a gold-based polishing compound and installed, the initial sliding will be smooth.
View detail
Super trap Diffuser Disc
I have been using it for a long time to stop Super trap Diffuser and it is cheaper than OEM Product and no Rust and Large change is helpful. View detail
Fits: BUELL All vehicles 91- (except 1125R), HARLEY-DAVIDSON SPORTSTERFamily
To remove the Primary.
Used to remove Primary.
It is rather expensive but easy to use.
View detail
for storing wires or cables as needed It is chrome color, the material is springy, easy to use. View detail
It is an eye opener!
I own an Indian Pursuit and have had many occasions when I wanted to stand my motorcycle upright for maintenance and customization.
It is convenient and I wish I had purchased it earlier.
View detail
Required for MotorcycleMaintenance
I have been using a slotted screwdriveretc. to muddy my brown, but I bought this to replace a set of seals on my Caliper. Finally, I can replace seals without damaging them here and there. View detail
Versatile Tool for your Spark Plug Maintenance Needs
About quality and texture: I am happy with the quality of the spark plug gap tool from Lisle, made from a steel construction with the assembly secured with rivets. About the feeling of use: I have used this tool to correctly measure and adjust the gapping of my spark plugs quickly and accurately. The combination of the measurement wires and adjustment tabs makes this tool very versatile for spark plug maintenance needs. Products to buy together: Some more tooling like a tappet adjustment wrench would also be desirable to purchase along side the spark plug gap tool to simplify these processes when it comes time for your annual maintenance. Difficulty of installation: The process to install takes a few minutes, place the measurement wire between the center electrode and ground electrode to obtain the clearance and use the adjustment tab to open or close the gap by adjusting the ground electrode. Not difficult to do. Cost performance and comparison with other products: Good costing as this is a quality made spark plug gap tool from Lisle that has with stood numerous usage without failure and much quicker and easier to use and read then feeler guages. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: Good for common sized gaps but may not be suitable for every situation unlike a set of feeler guages. View detail
This tool is very convenient for the task
About quality and texture, I can confirm that the quality is good and that the material used is steel for the entire tool with a mixture of wire to measure the gap and plate to adjust the gap. About the feeling of use, I had previously used feeler guages to measure my spark plug gaps and a small flat blade screwdriver to open up the spark plug gap if required, this tool is very convenient for the task now. Products to buy together, Some new spark plugs from NGK preferably would be ideal to also add to your cart when purchasing this tool so you can have a strong spark from your fresh and correctly gapped spark plug. Difficulty of installation, I can say the fitment of the spark plug gap tool for my installation was very easy due to the simple nature of it's use caused by it's convenient and compact design. Cost performance and comparison with other products, The pricing of the spark plug gap tool is great. You receive a product with a design that makes checking and adjusting spark plug gaps easier then using feeler guages at a price that anyone can afford to add to their toolbox. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Safety wire wrap/cutter
I gave a place in my toolbox.It's definitely a luxury item, but I think it's worth it. They make setup very easy and work exactly as you hope. The quality and feel won't surprise you, but they're good for the price. The cutter isn't great and for some reason it doesn't work close enough to the pivot point which is kind of annoying Handles safety wire like a champ, could use cutting edge run all the way to joint, there is a about a 1/2" where there is no cutter but that is nit-picking. Used it on three sets of grips with no issues.cut through the wire fine without damaging themselves, and I expect them to hold up for a long time View detail
Thanks just for selling Inch Bolt other than Stainless Steel.
Anyway, thanks for selling just one non-Stainless Steel Inch Bolt.
Stainless steel cannot be combined with aluminum due to electrical corrosion problems.
Black dyeing also rusts, so it's great that it's Chrome plating.
Quality is OK, too.
View detail
Hose clamp
Purchased to tighten Hose when installing Fee Filter 。
Simple and reliable Clamp.
View detail
![[CruzTools] 10pcs 3/8 Insertion Angle Torx Bit Set](https://img.webike-cdn.net/catalogue/images/45953/L019765_TS.jpg)
Required when playing with Germany cars and Harleys.
The Torx bit is a very expensive Torx bit, but this one is offered at a very reasonable price. Accuracy is also not a problem. View detail
Fits: BUELL All vehicles 91- (except 1125R), HARLEY-DAVIDSON SPORTSTERFamily
It's solid
I bought the special one in advance so that I would not have to worry in case of a breakdown. It is expensive but well made. Cost performance is not good. View detail
Even if you put it on and take it off.
The Screw Mounts do not get ruined after several times of putting them on and taking them off, so it is a great product. View detail
Stop Diffuser Disc
I have run about 3000 km with the Bolt to stop the Diffuser Disc, and it is getting browned, but there is no problem to use it. View detail
scratch-resistant
This product is not easily scratched when removing the Clip on the Door panel.
The panel has a guard to prevent the Gold pattern of Remover from hitting the panel, so it can be used as a panel.
It is garrison-free. Good.
View detail
Diffuser Disc
If you use it with anti-gumming grease, it will not stick and not much exhaust will stick to it, and it is cheaper than OEM products. View detail