Reviews
Heart breaker!
First and foremost, we must note that the BALI in the cutting process is quite bad, and honestly, it is the Level that causes injury.
If it is a FOR JAPAN MODEL product, I think it is a hesitant Level to ship the product as it is.
And it is not very good as accuracy, and the Center axis is also blurred.
However, it does not mean that it cannot be used at all. If BALI is removed sesse-sese-sese and military gloves are used, it is not impossible to use it.
However, we do not anticipate that the product will be used many times, and we hope that you will consider it as a disposable level for this time.
Personally, I would urge everyone to choose a more solid product when considering it as a tool.
well ♪ Hyakkety-yak ♪ It is possible for people who understand the concept of "Level" to purchase the product.
View detail
Wound to Bolt
I have not used them yet, but when I opened the package, I found that only the 3-pack of Stainless bolts had wounds all over and the hexagonal holes were gouged and deformed.
I don't know if it was during manufacture or storage/transportation, but it is an expensive item and I would like the packaging to be one piece at a time.
The other Titanium and Aluminum Bolts had no Wound, etc., so the quality was good, but for now, I will use the Stainless in inconspicuous places.
View detail
Too big, mostly for Wheel
[How is it used?
For undercarriage wash of Motorcycle
Was the one you received as per Image?
It is so much bigger than I imagined. It looks like the size of a car wheel brush. It has a Size feeling like a Brush for a wheel of a car.
How was your experience with it?
It is indeed flexible, but I think it is too big and not suitable for washing motorcycles. If it were half the size, it would be easier to wash the area around the rear shock and around the engine through the cowling, but I don't want to accidentally damage the paint with it.
It would be good for something like NAKED with an air-cooled engine.
[Points to note]
The bristles are too hard to wash painted surfaces, so it is mostly used around the feet and engine area.
[Opinions and requests to Manufacturer
Put it out half as fine as it already is.
View detail
I have checked the fit.
Strainer packing was too large to fit.
I had no choice but to reuse it, but there is no particular oil leakage.
I've checked the fit ….
View detail
I have to have this one, that's the decisive factor.
I don't see much difference between flicking it with a regular wet Towel and Large. I thought it would give me some kind of special shine, but it didn't, so I'm giving it a lower star.
Prior to that, Off-road
Helmet is not so surprisingly dirty unless you run frequently,
View detail
I couldn't use it well.
I bought this tool because I am not good at putting the piston through the cylinder when assembling the engine of MONKEY. However, I could assemble the engine better by hand without using the tool, probably due to my lack of skill. View detail
Huh?
There is a tinkering hole on only one side. View detail
As you tighten it in.
I use it for Caliper's rubout etc. When I tighten the Screw and open the Plate with 4POTCaliper like NC30, the Plate is not parallel and I can't get the 4 Pistons to be even etc.
The fact that it cannot be pushed in makes it difficult to use. The texture is good, so I would like to have the Guide of Plate as Quantity instead of 1 pc.:I am wondering if I should have purchased the 2pc one.
View detail
It's available but ・・・・・
There was no description of the dimensions in the product description of the Webig; there is no description on DAYTONA's website either, and the dimensions can finally be found by opening the handling instructions.
Our car is a custom vehicle. The diameter of the hole where the grip fits is 36mm. The hole diameter is 36mm, and the width of the brake lever is 20mm.
If I had known before I purchased the product, I would have gone to ・・・・・.
The lever hooking part was also machined.
Prospective buyers should check their own car's BuRipSize.
View detail
Fits: Others , HONDA GROM, HONDA MSX125, HONDA MONKEY125, HONDA SUPER CUB110, HONDA CROSSCUB110
I don't want it in jc92Clutch.
I don't use it to replace the Clutch on my jc92.
Clutch lock nut is 19mm.
View detail
Not always available.
Note that each GS has its own ideas about whether or not they will allow you to refuel.
If it is a store that will refuel you, you will probably have to show ID and sign a form.
It is a relief to have spare fuel at home, knowing the chaos that ensued during the earthquake.
However, storage space must be considered.
(I think you need a Seal, which is approved by the fire department, like a carry can. Some shopkeepers say
As long as it's posted, it's OK to the contrary.)
Complaint, the paint seems to be a little weak. It peels off when rubbed or bumped lightly.
Note, there will be a pressure difference, so you should put in a little less, even though it's clearly marked as 5L.
I thought it would be possible to avoid Gasoline spewing when the lid is opened, etc.
It is difficult to put Gasoline in the Fuel Tank, so you need to be creative not to spill it.
View detail
Although convenient….
It is troublesome to remove the Caliper when removing the Wheel and protect it from scratches, and this product seemed convenient and had a good reputation, so I purchased it.
I think it is convenient that it can be easily stored, protected, and hooked up inside the Porch, but I don't think it will be used that often.
The fabric is thin and feels cheap. I would like to see more cushioning. I felt that the selling price is too high for the material.
View detail
How is the performance compared to other products when attaching and detaching?
The size fits well, but the power to bite the plug, which is the original purpose of the plug socket, seems a little weak. It's actually very loose. I may have purchased it without knowing the detailed product specifications, so I looked at the product description again, but what about it? There seems to be a lack of information about product specifications. -------------------------------------------------- -------- The size fits well, but the power to bite the plug socket is a bit weak. It's actually a very loose level. I might have purchased it without knowing the specifications of the product, so I looked at the product description again. It seems that there is a lack of information about product specifications. Powered by Google Translator View detail
Item is smaller than advertised
Buy 1 or 2 sizes bigger as it is meant for the generic slim-fit Asian body. The material is great and the pockets are functional but the zip is too high and so is the waistline. Elastic under the arms is not sufficient View detail
It was a failure.
I usually use the ones sold at Home center, but I bought this one to match the Gold amount to get free shipping. The Vinyl bag ripped with just a little tugging and the oil was not absorbent so it overflowed. View detail
Nozle at the time of oil injection
I think it comes with the Oil when you buy it, but if you don't have it when you pour, you spill it, and if you wipe it clean after use, you can use it quite well. In terms of selling price, it's a bit pricey. View detail
honestly speaking, it's subtle
I thought it was easy to use with Pencil type and purchased it for electric inspection, but the system is not very good. View detail
Somewhat difficult to use
I'm glad it's reasonably priced, but it seems a little difficult to use…
It is not a consumable item, and I wish it were more expensive and easier to use.
The instructions on the back of the Package were easy to understand.
View detail
Not much...
[How is it used?
Used to adjust d-type Screw
Was the one you received as per Image?
Yes
How was your experience with it?
Outer diameter is Large, Clearance is tight
[Points to note]
Not very well made.
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Objective not met.
I purchased pcxjk05 for LowdownRear shock adjustment but the space around the Shock was too narrow to fit.
I will use it elsewhere...I wonder if there will be a time to use it.
In case you are wondering, the Wrench that came with the Mukawa Shock that I used to replace the Shock on my SUPER CUBC110 didn't fit either, so I bought this product.
View detail