Reviews
Necessities
Purchased for front axle shaft removal and attachment for tire replacement on GSX-R1000. It is very accurate, perfect fit, and safe to use. View detail
It is intended as an alternative to in-vehicle tools and for emergency use on the road.
The ZX-6R has an on-board tool storage compartment in the back of both the Tandem seat and the optional Single seat cover, but to use it, the storage bracket must be removed with a Hexagonal Wrench. It is very inconvenient though it is appreciated.
Since the servo motor of the exhaust device was removed to replace the external Slip-on Silencer, we decided to use the space to enhance our on-board tools and purchased this Compact with a minimum of tools.
For suspension setting, the Rear rebound damping force cannot be adjusted here, but I don't think this is a place that needs to be changed frequently in terms of usage. I have made a judgment on this.
Front can be used for each adjustment point.
I think it is better to prepare proper tools for daily maintenance, but I think it is better to separate it from emergency use on the road.
View detail
Easy Plug replacement
I've been using the OEM plug wrench for a while now and it has definitely made my work easier. View detail
Used for gsx-r1000
Purchased this product because OEM dedicated tools are expensive. The hex angles are highly accurate and do not rattle. View detail
To the last (Urgent) tool
It is not easy to use and is not good for emergency use. View detail
I changed my on-board tools to these.
Purchased because on-board tools are difficult to use and tacky.
Size, weight, etc. are omitted as they are described on the product introduction page of the manufacturer, etc.
Compact has all the tools necessary for in-vehicle use, thanks to Yamashiro, which handles a wide variety of Motorcycle products.
When I used it, I felt that it was nice and stiff when I stretched it out to use Driver and other products. Moreover, since this hardness can be adjusted, it can be retightened even if it loosens after long-term use. (Wrench and others are fastened with Snap using plastic, so they cannot be retightened.)
It is also nice that if it is placed in the included Case, even if it is removed from the in-vehicle tool mounting position, Driver and others will not be able to catch it and tamper with the inside.
View detail
For Plug Replacement
I bought this to replace a plug in my Naked motorcycle, with Magnet so it doesn't fall off after it comes off. View detail
Safe to have
Having one in each car is a great way to use it on the go. View detail
We have all the Size you need.
I was worried about E-Value Tap dice set EV-20TD 20PCS, which is often sold at Home center in the same price range.
I bought this one because there are 2 Pitch size Tap and Dice each in M10 and M12.
The fact that it is also sold by Yamashiro is another reason for its selection.
I am a little hesitant about this type of tool unless it is a product sold in stores.
I immediately expanded the screw holes in the Fog Lamp from M5 to M6 and used it to clean the screw holes in the Large and Under Guard. Of course, Dice was also used to clean the screws.
View detail
Convenient when you want to use it for a short time in Compact.
[How is it used?
I bought it to carry around and use when I need a quick fix.
Was the one you received as per Image?
It is exactly as shown in the Image. It may be smaller than expected.
How was your experience with it?
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
It doesn't work …
It said that the Plug would not fall off with Magnet, but the magnetic force was too weak and it did not stick at all, and the rubber inside was too weak to hold the Flag at all. View detail
It is for Motorcycle use only and has a full range of Size
[How is it used?
I bought this to clean up the Screw Lock agent and to prepare the Yamas that were getting crushed when I removed and installed the Bolt for maintenance.
Bolts used in Motorcycle are often finer than standard bolts and will not fit in a standard tap dice.
This product is tailored specifically for Motorcycle and can be used with many Bolts used on Motorcycles.
Was the one you received as per Image?
[Contents] and Package were as shown in the image.
How was your experience with it?
As per its intended use, it functions well enough to clean screw yamas and prepare yamas.
Even if it is not cleaned in one round trip, it will be cleaned after repeated repetitions.
Closing the Nut after using it on both the Bolt and the Nut feels so good because it slips in just by hand. Cleaning it will allow you to tighten it with more correct Torque.
It can be said that it is cosmetically excellent to use this much for Bolt and Nut at this price.
[Points to note]
None
How did it compare to other products?
None
View detail
wiping off
Super absorbent ultra-thick Microfiber Cloth, purchased for cleaning.
Quantity:1 Set of 2pcs. Different colors on the front and back and thick, so it is easy to wipe off, and there is no worry about putting scratches, etc.
The price is not that expensive, so I would like to buy a spare next time.
View detail
First Tap&Dice
Recently, I have been taking care of Kawasaki cars more and more, and I have been wondering if it is necessary to go that far. I bought it to clean up the screw holes, because Kawasaki cars often have screw locks on them.
I have no intention of making a new screw pile, so this product is sufficient for me.
Also, as others have said, it is a lineup for Motorcycle, so I think this will cover it unless it is too much.
View detail
Unplug Axle
I bought it to pull out the Front axle.
I was a little worried because the insertion angle was 3/8 instead of 1/2, but it was no problem.
SC80 is 24?
View detail
First Tap&Dice set!
[How is it used?
I use it to maintain my motorcycle! I hadn't used it before to clean Bolt and Screw holes with Beauty before, but now I use it on the Main to clean Disc Bolt and other parts that were coated with Screw lock material when I tighten them again.
Also, when I'm doing maintenance and the Bolt is hard to get in, I do both the Bolt and Screw holes as a shuffle before installing.
Was the one you received as per Image?
The product itself was just as Image! The size is also for Motorcycle, so it has all the size you need, which is great!
How was your experience with it?
It seems not to be suitable for a little hard usage such as using GunGun or cutting a screw mountain in a new base material.
We recommend that you use it only for Main, for example, to correct the actual object.
[Points to note]
As I said a bit earlier, I don't think the Material itself of this product is that authentic.
Hard usage may cause damage, so it's better to use it carefully.
How did it compare to other products?
Honestly speaking, I thought to buy Astro Products at first, but I picked up this one because the size of Yamashiro's motorcycle line up was excellent.
[Opinions and requests to Manufacturer
It's a cheap product, so it's probably a bad idea, but the package is too lousy.
Please make the package more considerate of storage! If not, it will become RoseRose and squishy, and sometimes I feel sad when I open the toolbox!
View detail
I couldn't get into the GSX-S125 Plug from the side.
I thought that I would use it for the removal of the Plug of GSX-S125, and purchased it, but I thought that I could remove the Shroud and enter from the side, but it was no good. It is the selection mistake here. View detail
Touring
Compact, unobtrusive and dependable. View detail
Rigid feeling
I've never used the more expensive ones, so I can't compare them.
I think that's good enough for me.
It seems sturdy and easy to understand when it comes to setting Torque.
Grip is also long and easy to apply force.
Also, there are clear instructions on the back of the Case on how to use it.
If you read and use it, you won't break it by mistake.
View detail
Te BearBear Yakon
Compact and safe in the TouringBack. View detail