Reviews
To co-tighten the silencer bracket and the racing hook
Purchased a bolt of appropriate length to install YOSHIMURA's Silencer Bracket and Babyface's Racing hook with m8 collar.
The color was selected to match the Silencer Bracket and Hook because they are black.
I was torn between the Button cap and Taper cap types, but decided to use a regular cap bolt with a thicker wall at the end to prevent licking the hexagonal hole when repeatedly attaching and detaching the cap.
View detail
I used to get it for free and I was Big surprised to see it for sale.
It would be useful if it were available.
Wouldn't it be a free Service?
View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard, HONDA XR50 Motard
So shiny
Love this item, everytime i turn the bike on i see it shining! Wish i had og=f bought it a long time ago as it fits well and looks great View detail
Simple to use with basic hand tools
About quality and texture - The crankshaft installer set from SP Takegawa is made from a heavy duty steel and with an oxide coated surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - I cannot believe how easy this tool made the crankshaft installation. Simple to use with basic hand tools and sustained no damage to the crankshaft or tool itself, so will able to be used again and again for the future engine builds that I have lined up. Products to buy together - A key product to purchase that will allow for removal of the crankshaft at home is a crankcase splitter tool, it is designed to pull the crankcases apart and can also be used to push the crankshaft out of the crankcase. Difficulty of installation - The installation of the crankshaft installer setl is a simple task that took 0.5 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the crankshaft installer set between the crankshaft and crankcase. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for but this is not the case for the crankshaft installer set as it is better value then what Kitaco offers their product for. About shipping and packaging - With there being no cost difference between sea freight and EMS for the crankshaft installer set, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
good one
good one with manufacturing stenless steel.Yoshimura logo laser printed on surface.recomenderd for yoshimura lovers. View detail
Use a Large capacity rather than a Small capacity!
It is better to use a Large size item than a Small size overflowing because it has a wider mouth.
It is safe for anything. It is a good idea to keep a few extra in stock.
I think it takes a little hang to tie the mouth using Tie Wrap.
I think I'll use the long Tie Wrap for something too, so that's separate.
You may want to purchase it.
Parts cleaner, Gasket, and other things you may need.
It is a good idea to prepare an Over.
Anyway, don't overflow! is the best.
This time, the premise is to use it for work, but the amount of Oil is small.
It will be carried over to the next activity. I will stock another pc.
View detail
Very convenient
Shield dirt can be easily wiped off at touring destinations.
Having a few copies is quite useful.
It can also be taken out quickly when mass touring and given to the touring party, and it is not too much of a hassle when used up and taken home as garbage.
Moreover, the price is low, so I can use it without hesitation.
I gave some of them to my colleagues and they were delighted.
View detail
I bought this for my Large Motorcycle.
I bought it for my Large Motorcycle which corresponds to Pipe I.D. & phi;28-& phi;53. I used to use Dustcloth but I bought it because the diameter of the Exhaust System is Large and the price is very reasonable. It is very convenient when washing the car, but I sometimes forgot to remove it and put the engine on, so I would like to put a ribbon on it as a marker. View detail
More reliable and convenient than using old Tire
I used to replace tires by laying down old tires, but the last time I used OEM tires, they were so hard that I had a hard time and my wheel got scratches all over.
CYGNUS for 12-inches was a little expensive in terms of cost performance because I had bought two-by-four method lumber at Home center and made it by myself, but it was a hassle to measure and cut and there seemed to be some know-hows on crate size, so I bought it this time. I bought it this time because it was a little bit expensive in terms of cost performance.
As for ease of use, I used to put an old Tire underneath, but when I crushed the other side of the Lever with my knee to remove the Tire from the Rim, the force was escaping, so now that it is in a wooden frame, I can apply the force firmly.
And even when too much force is applied, the wheel does not collapse and contact the ground like an old tire, so it was possible to replace the tire without worry.
However, in the past, I used to remove the Tire frequently to use up the Tire in Circuit driving, etc., but recently it is only once a year unless I puncture the Tire, so I started to think that it would be faster and easier to remove the Wheel and have the Shop replace it with a Changer when I think of the time and effort required for disposal of the Tire and removal of the nechae of the Weight, etc. I started to think that it is quicker, easier and more reliable to have a Shop replace the Tire with a Changer.
*Recommendation because it is very good for those who are replacing it themselves.
View detail
Not this product, but...
I purchased a TONE HexagonalBoxSocket insert angle 6.35
To replace the Screen of HondaCBR1000RR-R, as shown in the photo.
Buy a round Handlebar and turn the 2mm Bolt to work
Smoothly, it's done.
View detail
The L-shaped design makes it easy to change the direction for cleaning and polishing the Chain.
The DRCChain brush is an L-shaped brush that can be easily oriented to clean and polish chains, making it much easier to use than a U-shaped brush.
In addition, the length and softness of the Brush bristles and the length of the handle are just right and easy to apply force.
Some people tend to avoid cleaning and polishing chains in their daily maintenance work because of the messy nature of the work!
View detail
Strong adhesion!
I have purchased many different manufacturers and sizes of surface tapes, but this cotton tape from KITACO is the best. 0900-755-09002." I use it to attach and detach my ETC, but my friends use other cotton tapes and they keep coming off, but this product has never come off for me! I recommend this product to everyone because it is inexpensive and easy to use Size! View detail
DID chain tool usage review
DID chain tools are small in size and very convenient to use.
The strength of the tool is very strong and reliable.
The method of use is very simple, so anyone can easily operate it.
It seems like one tool can be used for a long time.
This served as an opportunity to further increase trust in DID.
-------------------------------------------------- -------- DID chain tools are small in size and very convenient to use. The strength of the tool is very strong and reliable. The method of use is very simple, so anyone can easily operate it. It seems like one tool can be used for a long time. This served as an opportunity to further increase trust in DID. Powered by Google Translator
View detail
A vital tool for a specific task
Easy to apply the rim stickers with this tool. A couple notes- firstly; absolutely perfect application of the rim stickers was impossible for me. But it's close enough that I'm probably the only one who will ever notice. Secondly: wheel balance weights will obstruct the use of this too & a degree of freehand sticker application will be required, it's not difficult though. View detail
It's great that it's not difficult.
I thought Chain exchange could only be done at the Shop.
I nervously worked through the Instruction Manual and YouTube, and it was surprisingly easy.
Next, I have prepared a Chain replacement for GSX1300R HAYABUSA and will lend it to my friend.
If you use it for a few cars, it will be enough to pay for itself.
I'm glad I bought it... ♪
View detail
CBR1000RR-R uses this
The Rear Axle Nut of the CBR1000RR-R is 36mm in diameter.
The tightening torque is also high, and a box with many angles was used, but it seemed to come off, so we changed to a 36mm hexagonal box.
At the same time, I also purchased a pure STD Nut with it. I think I was able to buy peace of mind at a reasonable price with FirmlyFit. I think I was able to take countermeasures before I got injured, although I am satisfied with myself.
View detail
Even an amateur can replace the chain. (However, 27mm Glasses are required.)
Recommended Chain Replacement Tool for DIY.
Chain replacement tools range from those that cost 40,000-50,000 yen to those that cost less than 5,000 yen. To be honest, I was hesitant about the price because I use them very infrequently (maybe not even twice), but I was sure of their quality and the official videos on how to use them. I'd rather buy something for $4,000 and have it fail." I bought it with the feeling of
You can replace it without mistake by following the instructions as shown in the official video.
The point that I had a hard time was that there were no 27mm Glasses, so I used MONKEY as a substitute, which made it difficult to fix the body, which is important, and I could not use force, etc. 27mm Glasses are essential to fix the body securely. I will definitely prepare 27mm glasses next time I use it.
The 19mm turning side can be adequately handled by the Box and Ratchet Handlebar.
It is also good that the OtherParts are sold in bulk. I experienced the pin removal process for the first time, but I feel it is inevitable that I will make a mistake and bend it someday.
If you are going to replace the Chain yourself, I don't think there is an option below this (price), so I think the Cost performance is sufficient.
View detail
BIGSize!!
I use it to fix sub-computers, voltmeters, oil temperature meters, thermometers… and other electronic devices that I have installed in my car. It is easy to attach and detach, yet it is very strong! View detail
Easy to use
I'm going to use the gloves and I don't have to worry about changing the Oil. View detail
The uses are unlimitedLarge!
I used it to secure the sub-computer on my Ninja 250SL, but I had some left over so I used it on the screen door of my front door! The adhesive is strong and does not come off, yet it is easy to put on and take off! This is really convenient! I think it can be used anywhere as long as it does not get wet! It is easy to install because you just need to remove the grease and stick it on! It is the most convenient product! View detail