Reviews
On the MVX250F.
I used it to fill the front fork with air. It's good because I can fill low pressure like 0.4 properly. View detail
substitute for an another
I bought this for a replacement for a plastic hammer that had a scratch or dent on the head. View detail
Size is also convenient to carry.
I take it with me when I go to the woods. It is lightweight and just right in terms of Size. I think the air pressure measurement is also accurate, which is important. View detail
Convincing texture
SizeAbout 820×I bought the one of 2000mm 。
I liked the texture of the Nylon raising on the front.
When I unpacked it, there was a smell peculiar to Rubber, so I dried it in the shade for a couple of days.
I was not sure if I wanted to go with a less expensive competitor, but I am satisfied with the DAYTONA product.
View detail
Easier to grip
I used to use Emon's Air gauge, but when I put it away, I accidentally closed it without removing the Air gauge and the gauge stuck and would not return to Zero. View detail
It would be useful to have when pinching round objects with Vise
I had only had a Mini Vice until now, but when I needed to do some welding, I bought a medium sized Vise. I bought it because I thought it would be useful.
I wish the material was sized to fit the groove of this product, but it is a little difficult to use when the angle is not right. Also, this product has a strong magnet that sticks to the vise, but it is a little troublesome to use it after aligning the teeth of the upper and lower jaw because the teeth of the upper and lower jaw seem to be misaligned and the tooth sides are not aligned properly.
So, it is not suitable for all purposes, but there will be several times in a lifetime when it would be very convenient to have it. The color is Kawasaki green, which I personally like, but there is no Kawasaki motorcycle at the moment, so I am not sure.
View detail
It looks like it will fit in the stated capacity.
2.The product is up to 5L, but it seemed like a Limit at about 2.3L.
It's in there with no problem, so it's supposed to be in there as described.
It's much easier to dispose of than the previous Dan Ball box was.
View detail
It was pretty good.
Having recently purchased a 125cc vehicle for commuting, I wanted an inexpensive, discreetly designed shoe that I could wear to work.
These Shoes have a toe tip like safety shoes, and are neither good nor bad in terms of comfort.
The first time I used it, I had to take public transportation to get to a remote location to deliver a motorcycle, and I had to walk quite a distance. It was a hot day, but I didn't feel any steam, and I didn't notice any weight. However, whether it was because of the way I walked or the shape of my feet, the edges of the tip of the tip-core hit the area slightly above the base of my thumb, and I felt discomfort, until finally I felt pain. In my case, it seems that I should avoid walking for a long time in these shoes. Well, since I bought these shoes for commuting to work, I don't expect to walk for a long time, so there is no problem.
Walking was tough, but I had no problem operating the Motorcycle GEAR and Brakes, and felt that they were rather easy to use.
As for the size, I usually buy 26.5 cm shoes, but there were several reviews that said these shoes were Large size, so I bought 26.0 cm ones this time and they were just the right size.
First, the laces that came with the shoes were short, perhaps because of my high instep, and it was difficult to cover the knot with the strap, so I purchased a slightly longer strap separately and replaced it with a longer one. Next, regarding the ankle strap, the length of the Strap itself is sufficient, but because the Velcro portion of the Strap is short, the surface to which it is attached becomes small when it is tightly tightened, and it sometimes comes off before you know it, which is dangerous if it gets caught on a footpeg or something, so you need to adjust the tightening. Also, the lining of the Strap has a tear after the third use.
I have listed a few disappointments, but I like the design and texture, and it was cheap, so I have no complaints. I don't know about the durability of the main parts yet, so I will preface this by saying that so far, I feel that the cost performance is good. Since I use it for commuting, I expect to use it more often than my Shoes, but I hope it will last more than a year.
View detail
For crafts
Purchased to secure aluminum plate when cutting out and drilling holes
It is working as expected.
View detail
It's a good thing to have.
The socket system was unified with a 3/8 socket angle, but only Impact had a 1/2 size socket angle, so we could not share the same socket. I bought this one because it is cheap and can be shared. I am not dissatisfied with the quality and usability. View detail
Purchased oilfor replacement for ninja1000
Items necessary when changing oil.
It can be disposed of as combustible trash as it is.
I think I will continue to Repeat Emon because other Manufacturers are expensive.
The only drawback is that the Oil will ooze out and if you don't double wrap the Vinyl and dump it, the rest will look Large weird.
View detail
Used to disassemble Clutch in LETS4Palette
I bought this because I needed it to loosen the 34mm nut when disassembling the Clutch on the LETS4Palette.
I chose this one because of its high cost performance, and I had no problems with its functionality or strength.
View detail
DAYTONAFilter wrench
I bought it for my motorcycle, but I can also use it in my car. View detail
DAYTONA Filter wrench
I bought it for my Motorcycle, but it can be used for my car as well. View detail
Satisfied, except for the price.
The quality is good and satisfactory. If only the price could be kept a little lower. View detail
Easy to use, but a little expensive
[How is it used?
I needed Wiring for the Circuit run.
There are 3 pieces in the package, so it can be used for 3 points:Drain bolt, Filler cap, and Oil Filter.
Was the installation difficult?
In the case of the 6R, the Drain bolt was wired to the Oil Pan Bolt, the Filler cap to the Bolt on the Clutch Cable Bracket, and the Oil Filter to the Bolt on the Sprocket Cover.
The Oil Filter was wrapped around the Hose Band and the Wire was passed through the Hose Band.
How was your experience with it?
Small, unobtrusive and easy to use, but a bit expensive….
I think you can get a cheaper one from another manufacturer.
The logo is so small that it is almost invisible.
View detail
feel well
I think the price is still a little high since it is not something that is replaced frequently. However, safety is our top priority, so I think it is unavoidable. View detail
Required for OH above the waist
Used for Valve matching. This is a task that is rarely done, so I am thankful for this Size. (Even this Size will probably never run out.) View detail
To the OH of SEROW.
I bought it because it is cheap, around OH above the waist of SEROW. Don't forget about Valve compound. View detail
Convenient to have
It can also measure depth, which is very useful to have.
The movement is a little stiff, but I think it is appropriate for the price.
View detail