Reviews
It cannot be used for Shinobi Sen Cowl (crying).
It's my fault for not checking carefully, but I bought the upper 6 push rivetsfor replacement of the front under cowl on my 2014NINJA1000, but the inside rivet size was thicker than the OEM Product and did not fit in the holes&hellip I bought this rivet for replacement for the upper 6 push rivetsfor the front under cowl of my 2014 NINJA1000.
For your information, the correct OEM Product number is 92039-0068. to
View detail
Can be used without problems
This is the first Chain Tool I bought, so I can't compare it with others, but I had no problem using it.
Since the cast surface of the Gold genus is intact, it is likely to rust the next time it is used unless it is treated against rust after use.
View detail
For Wiring of Race Vehicles
I purchased Wire to match Race regulation.
Wires also come in different thicknesses, and although thicker wires are fine for the drain bord and filler caps, fine places such as the split pins of Caliper cannot be wound with thicker wires, so we purchased thinner wires.
Since it is long enough to last almost a lifetime, I think it is cosmetically sound because once you buy it, you will be able to use it for quite a long time.
View detail
Oil absorption is not good
I used it to replace oil in my Ninja 1000.
It is 3.2L when not replacing Element, but it does not suck completely.
4.You said this is for 5L.
I really thought that if I smoked 4.5L I would probably get tapped out.
The only way to handle this is to add old newspapers or Dustcloth.
Think of it as the cost of the box.
These products are hit or miss, and it is better to use a reliable product.
View detail
Used for pre-ride inspection
I always use this guy before a long run to watch the voltage.
I have been stopped twice now for electrical abnormalities. I think it is much better than tolove it on the road. I have no problem using it, but the body is sticky.
View detail
Just in case.
It may not be an option, but Neck is the pricey one for this kind of thing. View detail
As a test
PlasticCleaner, I bought it to try it out because it seemed to have good reviews. The price is not that high, but the quantity is not too much.
It seems to be good for some Small scratches and dirt removal.
View detail
Easy to use
It is a common Horizontal Type carrying can.
It combines all of the above:ease of use, ease of carrying, and ease of handling.
It is 10L, so the volume is not large, but that makes it light and easy to handle.
Recommended for those who do not have a carrying can or are purchasing a carrying can for the first time.
View detail
For Oil Exchange
I use it all the time when I exchange Oil.
It is not particularly good or bad.
View detail
To
I always use it when I exchange Oil.
It is convenient to dispose of waste oil easily.
View detail
Air Pressure Check can be SMART
I have been using a HoseType air gauge, but I thought it was too bulky for motorcycle use and a little too compact for touring use, so I purchased this compact gauge. Because it is light and compact, I don't have any trouble carrying it around. The quality of the product is commensurate with the price. I compared it with the one I already have, but there is quite a bit of difference. There are other Quantities:2pc. I have about Set, so this is a comparison with that, but other Quantities:2pc. Set has almost no error on both sides. This one shows about 30kpa lower. I don't mind it because I use it knowing the error, but I'm not sure if it's a good idea for someone who buys this for the first time. I think you can trust it if it is an expensive one, but if you are buying something this pricey for the first time, I recommend you to compare it with the PROSpec. in your store. The other thing to consider is how long it will last and its durability. It's not a bad product, and I think it's a good portable one for emergencies. The Valve is a Quantity.:Set is Good! View detail
Tightened with a slotted screwdriver.
Used to replace an oil line. It seemed to be able to close it with a hexagon, but it didn't fit slightly. I think it is a millimeter. View detail
easy to use
Easy to use
Daido has Daido, you can trust him.
View detail
Both cost-effective and convenient
I had a Socket version of this shape, but it was not tinker-proof, so I purchased this product. The price was just right for those who think that a set of tools in a tool box is enough, but not for those who think that the texture is also an attractive feature of tools. View detail
Too Large to use for Scooter
[How is it used?
I bought this for Scooter Oilfor replacement.
When changing oil in the center stand of PCX125, it is difficult because there is no space to place a saucer.
Was the one you received as per Image?
I bought a Large size, but it was larger than I expected.
The texture was very good, and it looked like it would last a long time.
How was your experience with it?
With the Center Stand in place, I was able to change the oil, but the space under the Scooter and the size of the Oil Pan were too large, and it felt cramped and difficult to do so.
I am still glad I bought it, but I think I should have bought the One sizeSmallest one, because it is also very expensive.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Extremely common products
The Vinyl bag, which was only slightly touched by the residual heat of the exhaust pipe, melted and leaked waste oil when it was tied up with the tie wrap. It would be appreciated if you could change to a Vinyl bag with higher heat resistance.
Into
View detail
Cheap, but not easy to use.
[How is it used?
Used for Engine O/H of TZr50R.
In particular, a universal holder like this product is needed to remove the fixed nut of the Clutch.
Was the one you received as per Image?
We selected this product because it had the lowest Gold amount.
To be honest, I thought the cheap price would make the product quite poor, but it was not as bad as I expected.
The supplier may be the same as the ones offered by other Manufacturers because the pictures are the same.
How was your experience with it?
The ease of use is not all that great.
In the case of TZr, the fixed pin is hooked to the clutch housing, but the fixed pin is short and easily comes off,
I cannot apply force well. I have the impression that the size is not right for 4EUEngine, although it may be just the right size for other Scooters.
[Points to note]
Be careful not to put the fixed Pin in the wrong place.
I used it on two engines and accidentally put a pin on the bolt hole of the clutch, destroying the bolt hole.
How did it compare to other products?
Similar products are lined up at similar Gold prices, as if the suppliers are the same.
Once you buy one, it will last a lifetime, so you might as well get something a little more decent.
View detail
Requires some getting used to.
Too thin and spoiled in Bell Hammer's Nozzle.
Is it for a little thicker Nozzles like CRC?
Or is it compatibility with the car model? (Used on deRaster400 and GSR250)
We used it twice and returned to the old method of working with the Vinyl bag to stop and pour.
It also takes quite a while for the lubricant to travel through the Hose and come out from below.
The price is something I would be willing to keep for a trial, so I think it is a good idea to buy one to try it out.
It has been on the market for a long time, so I am sure it is useful for people who are used to it.
View detail
It's not what it's supposed to be used for.
I bought it to see if it could be used to prevent moisture from outdoor parking.
The actual rubber sheet is less than 1mm thick, so it sometimes picks up unevenness in the ground, resulting in puddles, but since I bought it, I will use it for a while.
View detail
Fits: DUCATI STREETFIGHTER S, DUCATI 848EVO, DUCATI 848, DUCATI 1299Panigale, DUCATI 1299 Panigale S, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale S/Tricolore, DUCATI 1098S, DUCATI 1199Panigale R, DUCATI 1098S, DUCATI 1098R, DUCATI 1098, DUCATI 1098, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Touring, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Granturismo, DUCATI 899Panigale, DUCATI Multistrada 1200S Pikes Peak
Good design. However, the hexagonal hole is delicate.
Coloring and design are both cool and satisfactory.
However, it should not be used for frequent removal/attachment, as the hole slips easily due to the aluminum material and 3mm hexagonal hole, which is designed to emphasize design.
If there is a lot of removal and installation, I personally recommend Ducabike with 4mm hex holes.
View detail