Reviews
Air bleeding is usually quicker!
Double disk If you are planning to use it on a car, it is usually faster to do it only with Air hose.
When pulling out with a syringe, Tank collapses at about 10 times (lol
Breather Valve will do the air bite and do it ~
Oh, I wasted another waste ...
View detail
The lowest
Write it honestly?
Adjust interval adjustment part
Clearly, it does not work
Is it the same structure as MONKEY Wrench
With the influence of the severity of the rattling which is unthinkable
It does not move...
The value of the price is There is none.
View detail
It broke soon.
I bought it for Bore up of LITTLE CUB and used it.
5-6 times (Bolt 5 to 6) I could use it normally.
Quantity Bolt of Head cover : Use Torque wrench to tighten 2 pc (9 N. m)
Not noticing Torque wrench breakdown BoltQuantity : Tightening too much 2 pc to make Quantity : I also broke with 2 pc.
In order to remove the broken Bolt it became difficult to buy various Special Tools and it was quite high
I got the Gold amount enough to buy Torque wrench.
In such a case, it was better to buy good performance items even at a high gold price.
View detail
It can not be used as it is
I attempted to buy it for a moment but the results were staggering.
It seems to be a Material whose elasticity and adhesion of Hose are totally insufficient,
Fluid leaked from the part connected to Breather,
Eventually it was a disaster to slip away and scatter liquid.
Despite having fixed with Clip.
Brake fluid is hard to wash, it attacks paint and slides
Because it is a very bad liquid,
It really is a problem for such things to happen.
It means that I did not behave as expected.
Next time I think I'll install more resilient Hose.
For now it will not be usable.
Perhaps, is Breather for the thick Caliper?
I do not know if there are such things
View detail
It can be used normally
It is unbelievably bulky to purchase at the Motorcycle supplies store so it's really useful to buy it through mail order. It is safe to exchange Oil whenever you buy it to a certain extent.
It may be a bit small for my Motorcycle KTM 690 ENDRO R.
View detail
Building is bad! It is hard to use! It's too expensive!
Packing of Cap and good distortion of the mouth of Bottle, is not it easy to make! Is not it something Copy goods? Scale is also small and unevenness is extremely hard to see! Left's de ○ ○ Na Poly clean is so easy to use that it will not compare! View detail
weak?
I chose DAYTONA as a reliable product if it's a product. Usability is good, balance adjustment is completed easily. However, since I changed the setting of carburetor about a month later, I set it again, and Gauge got 1 pc. It does not move at all, another 1pc. Even Gauge's swinging is slightly different from a normal needle.
Measurement etc etc. , Open Throttle with Valve open. I knew that it would be damaged if I performed the operation, so I was using it carefully enough and it has broken even though I did not do the wrong operation. I have two months to buy it yet. It probably is a product not covered by the warranty because there was nothing like a warranty card, but it has been broken too easily, you can not trust DAYTONA anymore.
Regrettable though it was a good product except durability.
View detail
Minimum item
It is the lowest.. The contents of Vinyl were broken and the waste oil leaked out. I regret to buy it because it is regrettable. Quality control is not done. I should have bought it at the neighborhood's home center. I will never buy it again. View detail
It was insufficient to confirm conformity with the actual car.....
The Grip part is likely to enter the GALINDO SuperBikeGrips with the outer diameter of φ34 by pushing the grinding wheel......
Even if I think I think I can break the Brake lever, I can hardly catch on the lock part even if I pull a full eye.. It may be good to move Lever from the adjustment position of your choice to the Grip when using this lock, but if you forget to return and do not want to hurt at Breaking, think of diversion because it is uneasy.
View detail
Turning the stuck Jet, the tip deformed...
When trying to loosen the stuck Jet, the tip of the Driver easily deformed, and the Plating also peeled off.
"* Light TorqueSpec. For Carburetor it can not be used for. Although it is being done in the Instruction Manual, it is said that it will be broken so easily.
After all, Jet fixed it purchased a normal slotted screwdriver again at home center.
I think that this product can not be used very much for a long-term leaving carburetor that Jet species may be stuck.
View detail
after all - - -
I bought it for Main jet for Replacement and free shipping fee.
As I thought, I could not use it because of Space problem.
Plating also peels off at Torque of Jet
It was a place where Plating was entering in the room Float indoors.
View detail
I will slide to MAJESTYsClutch ★ Outer
Majestys155's
I could use it for Pulley ♪
But -
Clutch outer has
Anything!
This is due to R of Outer shape
I thought that if the convex of Holder was even 2 mm long
There is no dissatisfaction with the rigidity etc. of the product
View detail
Really for 4 mini?
I bought it for use under the waist of AB27's Engine, but I could not use it. Firmly does not fit in the hole of Flywheel. If you use it Thunder etc. There is no choice but to shave the Arm part. It was useless shopping. View detail
Unfortunately there is nothing to see
Since there is no actual thing left, I could not prepare photos.
Seal Pick Tools has used only Astro and this DAYTONA, but this DAYTONA product does not work at all. I do not want to write such a thing, but the Gold genus is very soft, it gets bent easily and it becomes useless. The products of Blue and Black's Grip of AstroPRO Dakutsu are quite strong and easy to handle, but unfortunately DAYTONA's products can not be used practically.
View detail
I think Cospa is good.
I think Cost performance is good.
Hose may be a bit longer to use.
I have not used a syringe to date
I tried it on a trial.
View detail
Not available
【What made you decide the purchase?】
I wanted to put Oil in the wire efficiently and purchased it.
【How was it actually used?】
It's the worst. Oil does not enter at all.
[Is there anything I was disappointed about?]
Oil does not enter, all leaks
【Hope for Manufacturer - Please let me know if you have any improvement points]
Everything is bad
【Have you compared items?】
There is none.
[Others]
I will not buy it again.
I only had to remove the wire and lubricate it.
View detail
There seems to be no intersection standard for Plug insulators
I could not use it as a result.
The following 4 kinds of Plugs tried.
NGK CR8EH-9
NGK BKR7EIX-11PS
DENSO IK22G
ROVER NLP100290
This Plug socket holds the upper part of the Plug by Rubber with 3 step grooves.
When it gets stuck strongly, Extension and Spinner handleetc. Square will come out, and only the plug socket will remain on the Engine, now it is.
Since there is no choice, I reattached the tool and loosened the new Plug that I made.
I contacted Manufacturer and found that DOHCetc. Ideal for deep engine of Plug hole Model number 3300C. 180-16 / 3300C. Recommended for 250-16.
And it was that the Socket would remain.
There was no intersection standard in the guard part of Plug, it was explanation that there are individual differences depending on production lot and Manufacturer.
Perhaps it depends on the creation method, it can not maintain precision like machining.
In addition, I sent it to Manufacturer for confirmation, but the actual thing was confirmed, but the verification result that both Socket's dimensions and Rubber's material are within the company's standards, that it will not reflect on this product in this case is.
The point is that even if some people say that they can be used without problems, that happened to be a plug that suits them.
I thought that application would be useful if it was a Socket tool but it was a failure.
Personally those of the BALLarge bridge industry (Compared with Emon, decomposition Maintenance of Ball joint part can be done, with Grip Bar attached) We recommend special tools on board or on board.
View detail
It will be cheap. - - - - - Wax.
Although it is cheap, I ordered the outer diameter Size of Hose with Vernier calipers, but when I installed it, I got clip elongated and it did not become usable. I had anticipated that it would be so structurally - - - I learned a lot. Next time I decided to buy a wide type. View detail
I can not turn with a tool Screw
There is a probability of 50% that the hexagonal hole that spans the Wrench is Gap from Center, almost 5% / 32 Hexagonal Wrench will not enter Limit. Perhaps it seems that the thickness of the plating process is not considered. View detail
Items that take more time than I expected
I knew there was no Instruction Manual, but since there is no description of how many pieces of missing pieces are included, I do not even know whether it matches the number of these screws. (As far as the total is known)
There were quite a few books and I did not have Screw of Size removed from Case so I bought additional at Home center.
In Small letters, where there are descriptions for ReplacementScrew where they are very unkind.
It is impossible for amateurs ~.
View detail